References
- ANSYS, F., 2009. 12.0 Theory Guide. ANSYS Inc, 5.
- Cable, M., 2009. An Evaluation of Turbulence Models for the Numerical Study of Forced and Natural Convective Flow in Atria. Queen's University Kingston, Ontario, Canada.
- Churchill, S.W., Chu, H.H., 1975. Correlating Equations for Laminar and Turbulent Free Convection from a Vertical Plate. International Journal of Heat and Mass Transfer, 18(11), 1323-1329. https://doi.org/10.1016/0017-9310(75)90243-4
- Eckert, E.R.G., Drake, R.M. Jr., 1987. Analysis of Heat and Mass Transfer.
- Gavory, T., De Seze, P.E., 2009. Sloshing in Membrane LNG Carriers and its Consequences from a Designer's Perspective.The Nineteenth International Offshore and Polar Engineering Conference.
- Han, K.C., Hwang, S.W., Cho, J.R., Kim, J.S., Yoon, J.W., Lim, O., Lee, S.B., 2011. A Study on the Boil-Off Rate Prediction of LNG Cargo Containment Filled with Insulation Powders. Journal of the Computational Structural Engineering Institute of Korea, 24(2), 193-200.
- Han, Y.Y., Kwon, J.C., Kim, W.S., Kim, M.S., Choe, I.H., 2006. The Development on the 3-Dimensional Calculation Program of Temperature Distribution for Gas Carriers. Proceedings of the 2006 Joint Conference on Korean Association of Ocean Science and Technology Societies(KAOSTS), 504-510.
- Heo, J.U., Lee, Y.J., Cho, J.R., Ha, M.K., Lee, J.N., 2003. Heat Transfer Analysis and BOG Estimation of Membrane-Type LNG Cargo during Laden Voyage. Transactions of the Korean Society of Mechanical Engineers A, 27(3), 393-400. https://doi.org/10.3795/KSME-A.2003.27.3.393
- Heo, J.H., 1998. Heat Flux Calculation for Thermal Equilibrium of Cofferdam in a LNG Carrier. Journal of the Society of Naval Architects of Korea, 35(1), 98-106.
- Heo, J.H., Jeon, Y.H., 1997. Temperature Distribution for a Membrane type LNGC Cargo Tank. Journal of the Society of Naval Architects of Korea, 34(4), 108-118.
- Holman, J.P., 2010. Heat Transfer., McGraw-Hill.
- IMO, 2003. International Code for the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk (I.G.C code). International Maritime Organization.
- International Gas Union (IGU), 2016. 2016 Edition, World LNG Report. International Gas Union.
- Jin, K.K., Yoon, I.S., Yang, Y.C., 2015. An Effect of Surface Dashpot for KC-1 Basic Insulation System Under Sloshing Loads. Transactions of the KSME C: Industrial Technology and Innovation, 3(3), 193-199. https://doi.org/10.3795/KSME-C.2015.3.3.193
- Lee, B.J., Kim, S.B., 2014. Current State of the Polymer Material Technology for Cryogenic. Prospectives of Industrial Chemistry, 17(5), 1-11.
- Lee, J.H., 2004. Thermal Analysis Comparison of IMO with USCG Design Condition for the LNGC During the Cool-down Period. Transactions of the Korean Society of Mechanical Engineers B, 28(11), 1390-1397. https://doi.org/10.3795/KSME-B.2004.28.11.1390
- Lee, J.H., Choi, H.K., Choi, S., Oh, C., Kim, M.H., Kim, K.K., 2004. Thermal Analysis for the GT-96 Membrane Type LNGC during the Cool-down Period. Proceedings of the Korean Society of Mechanical Engineers, 1346-1351.
- Lee, J.H., Kim, K.K., Ro, S.T., Chung, H.S., Kim, S.G., 2003. A Study on the Thermal Analysis of Spray Cooling for the Membrane Type LNGC During the Cool-Down Period. Transactions of the Korean Society of Mechanical Engineers B, 27(1), 125-134. https://doi.org/10.3795/KSME-B.2003.27.1.125
- Lee, Y.B., Choe, K.H., 2015. Development of Polyurethane Foam Insulator with High Thermal Insulation Performance for KC-1 LNG Carrier. The Twenty-fifth International Offshore and Polar Engineering Conference.
- Miana, M., Legorburo, R., Díez, D., Hwang, Y.H., 2016. Calculation of Boil-Off Rate of Liquefied Natural Gas in Mark III Tanks of Ship Carriers by Numerical Analysis. Applied Thermal Engineering, 93, 279-296. https://doi.org/10.1016/j.applthermaleng.2015.09.112
- Rhee, S.H., 2005. Unstructured Grid Based Reynolds-Averaged Navier-Stokes Method for Liquid Tank Sloshing. Journal of Fluids Engineering, 127(3), 572-582. https://doi.org/10.1115/1.1906267
- Song, S.O., Lee, J.H., Jun, H.P., Sung, B.Y., Kim, K.K., Kim, S.G., 1999. A Study on the Three-Dimensional Steady State Temperature Distributions and BOR Calculation Program Deveolpment for the Membrane Type LNG Carrier. Journal of Korean Society of Marine Engineering, 23(2), 140-149.
- Vargaftik, N.B., Vinogradov, Y.K., Yargin, V.S., 1996. Handbook of Physical Properties of Liquids and Gases. Pure Substances and Mixtures, 663-717.
- Zakaria, M.S., Osman, K., Saadun, M.N.A., Manaf, M.Z.A., Hanafi, M., Hafidzal, M., 2013. Computational Simulation of Boil-Off Gas Formation inside Liquefied Natural Gas Tank Using Evaporation Model in ANSYS Fluent. Applied Mechanics and Materials, 839-844.
Cited by
- Optimal Process Design of Onboard BOG Re-liquefaction System for LNG Carrier vol.32, pp.5, 2018, https://doi.org/10.26748/KSOE.2018.6.32.5.372
- Variation of Exit Flow Velocity according to Various Inlet Temperature and Air Flow Rate against Fan Heater vol.22, pp.2, 2018, https://doi.org/10.9726/kspse.2018.22.2.095