Transactions of Materials Processing (소성∙가공)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지
DOI QR코드

DOI QR Code

Goss Texture Development of Asymmetrically Rolled IF Steel Sheet

비대칭 압연한 IF 강 판의 Goss 집합조직 발달

  • 김인수 (금오공과대학교 신소재공학부) ;
  • 남수권 (금오공과대학교 신소재공학부) ;
  • 김광희 (금오공과대학교 신소재공학부, 대신금속(주)) ;
  • 이동녕
  • Received : 2017.01.18
  • Accepted : 2017.05.24
  • Published : 2017.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

To obtain the Goss texture, {110}<001>, IF steel sheets were asymmetrically rolled by 50-89% reduction in the thickness at room temperature and subsequently annealed at 200, 900, and $1200^{\circ}C$ in a box furnace under air atmosphere. The asymmetrically rolled specimens and annealed specimens show well-developed Goss texture, {110}<001>. After the IF steel sheets were asymmetrically rolled at room temperature and subsequently annealed at $900^{\circ}C$ for 1 h in a box furnace under air atmosphere, the intensity of the Goss texture, {110}<001> was high in the IF steel sheets.

Keywords

References

  1. N. P. Goss, 1934, Electrical Sheet and Method and Apparatus for Its Manufacture and Test, US patent No 1965559.
  2. N. P. Goss, 1934, New Development in Electrical Strip Steels Characterized by Fine Grain Structure Approaching the Properties of a Single Crystal, Trans. ASM, Vol. 23, pp. 511-531.
  3. K. Honda, S. Kaya, 1926, On the Magnetisation of Single Crystals of Iron, Sci. Rep. Tohoku Imp. Univ. Ser. 15, pp. 721-754.
  4. S. H. Lee, D. N. Lee, 2001, Analysis of Deformation Textures of Asymmetrically Rolled Steel Sheets, Int. J. Mech. Sci., Vol. 43, No. 9, pp. 1997-2015. https://doi.org/10.1016/S0020-7403(01)00025-X
  5. S. H. Lee, D. N. Lee, 1998, Shear Rolling and Recrystallization Textures of Interstitial-free Steel Sheet, Mater. Sci. Eng., A, Vol. 249, No. 1, pp. 84-90. https://doi.org/10.1016/S0921-5093(98)00588-7
  6. K.-K. Um, H.-T Jeong, J.-K An, D. N. Lee, G. Kim, O. Kwon, 2000, Effect of Initial Sheet Thickness on Shear Deformation in Ferritic Rolling of IF-steel Sheets, ISIJ Int., Vol. 40, No. 1, pp. 58-64. https://doi.org/10.2355/isijinternational.40.58
  7. S. K. Nam, 2017, Change of Plastic Strain Ratio of Al Sheet and Magnetic Property of Steel Sheet after Asymmetry Rolling, Kumoh National Institute of Technology, Gumi, Korea.
  8. D. N. Lee, 1995, The Evolution of Recrystallization Textures from Deformation Textures, Script. Metall. Mater. Vol. 32, No. 10, pp. 1689-1694. https://doi.org/10.1016/0956-716X(95)00256-U
  9. D. N. Lee, 2005, Relationship between Deformation and Recrystallization Textures, Phil. Mag., Vol. 85, No. 2-3, pp. 297-322. https://doi.org/10.1080/14786430412331315734
  10. D. N. Lee, H.-T. Jeong, 1998, The Evolution of the Goss Texture in Silicon Steel, Scr. Mater., Vol. 38, No. 8, pp. 1219-1223. https://doi.org/10.1016/S1359-6462(98)00022-0
  11. K.-H. Kim, D. N. Lee, 2001, Analysis of Deformation Textures of Asymmetrically Rolled Aluminum Sheets, Acta Mater., Vol. 49, No. 13, pp. 2583-2595. https://doi.org/10.1016/S1359-6454(01)00036-2
  12. H. J. Bunge, 1982, Texture Analysis in Material Science, Butterworth, Guildford, UK, pp. 47-118, pp. 330-338.
  13. H. J. Bunge, C. S. Esling 1982, Quantitative Texture Analysis, Deutsche Gesellschaft fur Metallkunde, Germany and Societe Francaise de Metallurgie, France, Alle Rechtevorbehalten, pp. 129-160.