DOI QR코드

DOI QR Code

Cantilever beam vibration sensor based on the axial property of fiber Bragg grating

  • Casas-Ramos, Miguel A. (Posgrado de Maestria y Doctorado en Ingenieria, Universidad Nacional Autonoma de Mexico) ;
  • Sandoval-Romero, G.E. (Centro de Ciencias Aplicadas y Desarrollo Tecnologico, Universidad Nacional Autonoma de Mexico)
  • 투고 : 2016.08.08
  • 심사 : 2017.05.22
  • 발행 : 2017.06.25

초록

In the fields of civil engineering and seismology, it is essential to detect and tracking the vibrations, and the fiber Bragg gratings (FBGs) are typically used as sensors to measure vibrations. Where, one of the most popular and detailed approaches to use FBGs as vibration sensors involves the use of cantilever beam designs, which adds a mass to measure low and moderate frequencies (from 20 Hz up to 1 kHz) with high sensitivities (greater than 10 pm/g). The design consists of a bending strain in the cantilever that is simultaneously transferred to the FBG, resulting in a shift in the wavelength that is proportional to the strain experienced by the cantilever. In this work, we present the experimental results of a vibration sensor design using a cantilever beam to generate an axial uniform strain in the FBG in-line with the vertical axis, which modifies the cantilever's natural frequency that allows the sensor to have a wide frequency broadband without losing sensitivity. This sensor achieved a sensitivity of about 339 pm/g and a natural frequency of 227.3 Hz. The presented design compared with the traditional cantilever beam-based FBG vibration sensors, has the advantages of a simple design for detection on vibration-sensitive structures and its physical parameters can be easily modified in order to satisfy the requirements of the desired vibration measurements.

키워드

과제정보

연구 과제 주관 기관 : DGAPA-UNAM

참고문헌

  1. Antunes, P., Domingues, F., Granada, M. and Andre, P. (2012), Mechanical Properties of Optical Fibers, Selected Topics on Optical Fiber Technology, (Ed., Moh. Yasin), InTech. Available from: http://www.intechopen.com/books/selectedtopics-on-optical-fiber-technology/mechanical-properties-ofoptical-fibers (accessed 10.01.15)
  2. Basumallick, N., Chatterjee, I., Biswas, P., Dasgupta, K. and Bandyopadhyay, S. (2012), "Fiber Bragg grating accelerometer with enhanced sensitivity", Sensor. Actuat. A-Phys., 173(1), 108-115. https://doi.org/10.1016/j.sna.2011.10.026
  3. Berkoff, T.A. and Kersey, A.D. (1996). "Experimental demonstration of a fiber Bragg grating accelerometer", IEEE Photonics Technol. Lett., 8(12), 1677-1679. https://doi.org/10.1109/68.544716
  4. Bertholds, A. and Dandliker, R. (1988), "Determination of the individual strain-optic coefficients in single-mode optical fibres", J. Lightwave Technol., 6(1), 17-20. https://doi.org/10.1109/50.3956
  5. Ferraro, P. and De Natale, A. (2002), "On the posible use of optical fiber Bragg grating as strain sensors for geodynamical monitoring", Opt. Laser. Eng., 37, 115-130. https://doi.org/10.1016/S0143-8166(01)00141-5
  6. Gere, J.M. and Goodno, B.J. (2009), Mechanics of Materials, (7th Edition), Cengage Learning, Toronto, Ontario, Canada.
  7. Hibbeler, R.C. (2006), Mecanica de materiales, (6th Edition), Pearson Prentice Hall, Naucalpan de Juarez, Mexico.
  8. Julich, F., Aulbach, L., Wilfert, A., Kratzer, P., Kuttler, R. and Roths, J. (2013), "Gauge factors of fibre Bragg grating strain sensors in different types of optical fibres", Meas. Sci. Technol., 24(9), 1-7.
  9. Kashyap, R. (2009), Fiber Bragg Gratings, (2nd Edition), Academic Press, Burlington, MA, USA.
  10. Kersey, A.D., Davis, M.A., Patrick, H.J., LeBlanc, M., Koo, K.P., Askins, C.G., et al. (1997), "Fiber grating sensors", J. Lightwave Technol., 15(8), 1442-1463. https://doi.org/10.1109/50.618377
  11. Li, K. (2016), "Review of the strain modulation methods used in fiber bragg grating sensors", J. Sensors, 2016, 8 pages.
  12. Li, T., Shi, C., Tan, Y., Li, R., Zhou, Z. and Ren, H. (2017), "A diaphragm type fiber Bragg grating vibration sensor based on transverse property of optical fiber with temperature compensation", IEEE Sensors J., 17(4), 1021-1029. https://doi.org/10.3390/s17051021
  13. Li, T., Tan, Y., Han, X., Zheng, K. and Zhou, Z. (2017), "Diaphragm based fiber Bragg grating acceleration sensor with temperature compensation", Sensors, 17(1), 218. https://doi.org/10.3390/s17010218
  14. Mita, A. and Yokoi, I. (2000), "Fiber Bragg grating accelerometer for structural health monitoring", Proceedings of the 5th International Conference on Motion and Vibration Control 2000, Sydney, Australia, December.
  15. Todd, M.D., Johnson, G.A., Althouse, B.A. and Vohra, S.T. (1998), "Flexural beam-based fiber Bragg grating accelerometers", IEEE Photonics Technol. Lett., 10(11), 1605-1607. https://doi.org/10.1109/68.726764
  16. Wang, C., Lu, Q. and Cheng, L. (2013), "Novel type of temperature self-compensating acceleration transducer based on OFBG", IEEE Sensors J., 13(8), 3012-3013. https://doi.org/10.1109/JSEN.2013.2253604
  17. Weng, Y., Qiao, X., Feng, Z., et al. (2011), "Compact FBG diaphragm accelerometer based on L-Shaped rigid cantilever beam", Chinese Optics Lett., 10(9), (100604-1)-(100604-4).
  18. Wu, J., Masek, V. and Cada, M. (2009), "The possible use of fiber Bragg grating based accelerometers for seismic measurements", Proceedings of the IEEE CCECE 2009, St. John's, Canada, May.
  19. Xiang, L., Jiang, Q., Li, Y., and Song, R. (2016), "Design and experimental research on cantilever accelerometer based on fiber Bragg grating", Opt. Eng., 55(6), 066113. https://doi.org/10.1117/1.OE.55.6.066113
  20. Zhang, W., Wu, Z., Liu, Y., Yang, Y., Kai, G., Zhao, Q., et al. (2005). "Principles and realizations of FBG wavelength tuning with elastic beams", Optoelectronic Lett., 1(1), 5-9. https://doi.org/10.1007/BF03033603

피인용 문헌

  1. Fiber Bragg grating based acceleration sensors: a review vol.41, pp.1, 2017, https://doi.org/10.1108/sr-10-2020-0243
  2. Modifications on F2MC tubes as passive tunable vibration absorbers vol.28, pp.2, 2017, https://doi.org/10.12989/sss.2021.28.2.153