DOI QR코드

DOI QR Code

Sensitivity study for important parameters of VIV fatigue evaluation of SCR

  • Lee, Sung-Je (Ship & Ocean R&D Institute, Daewoo Shipbuilding & Marine Engineering Co., Ltd.) ;
  • Kang, Chanhoe (Ship & Ocean R&D Institute, Daewoo Shipbuilding & Marine Engineering Co., Ltd.) ;
  • Jang, Changhwan (Ship & Ocean R&D Institute, Daewoo Shipbuilding & Marine Engineering Co., Ltd.) ;
  • Park, Sung-Gun (Ship & Ocean R&D Institute, Daewoo Shipbuilding & Marine Engineering Co., Ltd.)
  • 투고 : 2017.03.03
  • 심사 : 2017.05.15
  • 발행 : 2017.06.30

초록

Since risers have to be operated without being replaced during the design life time after installation, fatigue evaluation as well as strength analysis should be performed. The fatigue life of the riser is known to be dominantly influenced by wave loading and vortex induced vibration (VIV) phenomena. The fatigue life evaluation method and the behavior characteristics of the riser by the wave have been done a lot. Even though the VIV is an important source of fatigue damage for SCR, the evaluation method and behavior characteristics by VIV have not been studied relatively. Most of the S / W for calculating VIV fatigue are a semi-empirical model based on various theoretical models and experiments. For better understanding of VIV response, it is necessary to investigate the effect of parameters which affects the analysis result. This paper summarizes the results of parametric study performed to enhance the understanding of relationship between each parameter and fatigue analysis result.

키워드

참고문헌

  1. Francisco E. Roveri and Kim J. Vandiver, SLENDEREX: Using SHEAR7 for assessment of fatigue damage caused by current induced vibration, 20th International Conference on Offshore Mechanics and Arctic Engineering, OMAE2001, Vol.1, pp.427-434.
  2. Kim J. Vandiver and Li Li, SHEAR7 V4.4 Program theoretical manual, Department of Ocean Engineering, Massachusetts Institute of Technology, Massachusetts Institute of Technology, (2005).
  3. Michael A. Tognarelli, Yin Fengjie, Campbell Mike and Achanta Vamsee, Benchmarking of SHEAR7V4.5: Comparisons to full scale drilling riser VIV data and legacy analyses, ASME 28th International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2009, Vol.5, pp. 463-468.
  4. Yang G., W.R. Frank, Campbell R.B. and S.T. Slocum, VIV model test data comparison with Shear7 V4.5, ASME 27th International Conference on Offshore Mechanics and Arctic Engineering, OMAE 2008, Vol.5, pp.547-558.
  5. Zhao Ziguang, Calculation of fatigue damage for tensioned risers from vortex induced vibration, Master degree Thesis of Marine Structures, Norwegian University of Science and Technology, (2011).