Tunnel and Underground Space (터널과지하공간)

Korean Society for Rock Mechanics and Rock Engineering (한국암반공학회)
권호 표지
DOI QR코드

DOI QR Code

Mechanical Properties of Minerals in Daejeon Granite According to Depths by Dynamic Ultra-micro Hardness

동적 초미소 경도법에 의한 심도별 대전화강암 내 광물들의 역학적 특성

  • Received : 2017.06.16
  • Accepted : 2017.06.22
  • Published : 2017.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

The hardness and mechanical properties of the minerals in the Daejeon granite according to depths were investigated by indentation test, load-unload test, and cycle test of dynamic ultra-micro hardness. As a result of the tests, it was possible to classify into three mineral groups (Group-1, -2, -3). The Martens hardness was not significantly different between 41 m and 223 m depths in three mode tests. Nevertheless, they showed in the order of a cycle test < load-unload test < indentation test. Considering the average Martens hardness, elastic modulus, and indentation work for each mineral group, their boundaries were relatively clear. In conclusion, A relatively accurate hardness of minerals can be obtained by three mode tests of dynamic ultra-micro hardness. In addtion, it was possible to characterize the elastic modulus and the elastic-plastic properties of the minerals from the load-unload and cycle tests.

동적 초미소 경도법의 압입시험, 하중-비하중 시험, 그리고 반복시험을 이용하여 심도별 대전화강암 내 광물들의 경도와 역학적 특성을 살펴보았다. 시험 결과 세 개 구간(Group-1, -2, -3)으로 광물 집단의 분류가 가능하였다. Martens 경도값은 세 가지 시험법 모두에서 41 m와 223 m 심도에 따른 차이가 크지 않았다. 그럼에도 불구하고, 그 크기는 반복시험<하중-비하중 시험<압입시험 순으로 나타났다. 광물 집단별 평균 Martens 경도, 탄성계수, indentation work 등을 고려해 볼때, 그들의 경계는 비교적 뚜렷하게 나타났다. 결론적으로 동적 초미소 경도법의 세 가지 형태 시험법을 이용함으로써 광물들에 대한 비교적 정확한 경도값을 얻을 수 있었다. 또한 하중-비하중 시험과 반복시험으로부터는 광물들의 탄성계수와 광물들의 탄성적-소성적 성질 특성 파악도 가능하였다.

Keywords

References

  1. ASTM, 2001, Standard Test Method for Brinell Hardness of Metallic Materials, ASTM International, West Conshohocken, PA, E10-01.
  2. ASTM, 2005, Standard Test Method for Rubber Property- Durometer Hardness, ASTM International, West Conshohocken, PA, D2240-05.
  3. ASTM, 2013, Standard Test Method for Rebound Number of Hardened Concrete, ASTM International, West Conshohocken, PA, C805M-13a.
  4. Chang, G. S., 2005, Hardness measurement methods and its principles, Fiber Information, Vol. 33, 192-214.
  5. David, T., 2000, The Hardness of Metals, Oxford University Press.
  6. Engqvist, H and Wiklund, U., 2000, Mapping of mechanical properties of WC-Co using nanoindentation. Tribology Letters, Vol. 8, 147-152. https://doi.org/10.1023/A:1019143419984
  7. Farmer, I. W., 1992, Rock testing:Deficiencies and selection. Main lecture. Proc International Symposium on Geomechanics, 91. A.A. Balkema.
  8. Gunsallus, K. L. and Kulhawy, F. H., 1984, A comparative evaluation of rock strength measures, International. Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstract, Vol. 21, 223-248.
  9. ISRM, 2004, Rock characterization testing and monitoring, ISRM suggested methods, Editor E.T. Brown, The commission on Testing Methods, International Society for Rock Mechanics, Pergamon Press, 1-211.
  10. Kahraman, S., 2001, Evaluation of simple methods for assessing the uniaxial compressive strength of rock, Internation Journal of Rock Mechanics and Mining Sciences, Vol. 38, 981-994. https://doi.org/10.1016/S1365-1609(01)00039-9
  11. KSRM, 2010, Korea standard, Korean Society for Rock Mechanics, pp.1-123.
  12. Nesse, W.D., 2016, Introduction to mineralogy, 3rd Edition, Oxford University Press, 1-512.
  13. Qi, H. J., Joyc, K. and Boyce, M. C, 2003, Durometer Hardness and the Stress-Strain Behavior of Elastomeric Materials. Rubber Chemistry and Technology, Vol. 76, No. 2, 419-435. https://doi.org/10.5254/1.3547752
  14. Rockwell, S. P., 1922, The Testing of Metals for Hardness, Transactions of the American Society for Steel Treating, Vol. II, No. 11, 1013-1033.
  15. Shalabi, F. I., Cording, E. J. and Al-Hattamleh, O.H., 2007, Estimation of rock engineering properties using hardness tests. Engineering Geolology, Vol. 90, 138-147. https://doi.org/10.1016/j.enggeo.2006.12.006
  16. Shimadzu, 2012, Shimadzu Dynamic Ultra-micro Hardness Tester, DUH-211/DUH-211S Instruction Manual.
  17. Smith, R. L. and Sandland, G. E., 1992, An Accurate Method of Determining the Hardness of Metals, with Particular Reference to Those of a High Degree of Hardness, Proceedings of the Institution of Mechanical Engineers, 623-641.
  18. Szwedzicki, T., 1998, Indentation hardness Testing of Rock, Internation Journal of Rock Mechanics and Mining Sciences, Vol. 35, No. 6, 825-829. https://doi.org/10.1016/S0148-9062(97)00334-3