DOI QR코드

DOI QR Code

한반도 연해안지역 환경시험기준의 테일러링을 위한 온도기준 설정에 관한 연구

A study on the temperature guidelines of weapon systems test & evaluation in the coastal environment of the Korean peninsula

  • 투고 : 2017.10.20
  • 심사 : 2017.11.21
  • 발행 : 2017.11.30

초록

환경시험의 목적은 시험대상 제품이 수명주기 중 겪을 수 있는 환경에 노출되었을 때 정상적인 기능을 수행할 수 있도록 설계 제조되었는지를 시험 평가하는 것이다. 본 논문은 한반도 연해안지역에서 운용할 군수장비의 운용환경조건에 대한 온도시험의 설계 기준을 제안한다. 온도기준은 과도하거나 과소하지 않게 합리적으로 설계되어야하는데 본 연구에서는 한반도 해안지역에서 가장 더웠던 지역과 가장 추웠던 지역을 기준으로 고온 및 저온에 대한 다양한 백분위별 발생빈도를 제시하여 사용군이 선택할 수 있도록 한다. 1904년부터 2015년까지 한반도 28개 연해안 지역 관측지점의 기온 자료를 분석한 결과 1개월 기준으로 가장 더운 지역은 포항, 가장 추운 지역은 신의주로 확인되었다. 한반도 해안 환경에서 고온과 저온의 1% 발생빈도값은 각각 $37.7^{\circ}C$$-23.7^{\circ}C$로 추정되었다. 아울러 상대습도, 풍속, 태양복사를 포함하는 고온과 저온의 일주기표도 제시한다.

This paper suggests a temperature guidance which must be addressed in the preparation of specifications for military equipment used in ocean/coastal environment of the Korean peninsula. It would often be costly to design materiel to operate under the most extreme environmental conditions ever recorded. Therefore, military planners usually accept equipments designed to operate under environmental stresses for all the time except a certain small percentage of the time. In this study, an 1-percent frequency of occurrence is recommended. Pohang and Shineiju are chosen to represent the hottest and coldest regions, respectively, based on surface weather observations among 28 costal regions from 1904 to 2015. The 1st and 99th percentile temperatures for Pohang and Shineiju are $37.7^{\circ}C$ and $-23.7^{\circ}C$, respectively. Diurnal cycles, including solar radiation, relative humidity and wind-speed are also provided.

키워드

참고문헌

  1. Kim, I. S. and Kang, C. W. (2002). A temperature analysis study of east asia for generation of temperature specification. Journal of the Korea Institute of Military Science and Technology, 5, 11-22.
  2. Kim, Y.R., Yun, J. H., Na, J. H., Kim, J. E., Kim, S. O., Kim, D. G. and Hong, Y. W. (2017). A study on the water temperature and salinity guidelines for a military product test & evaluation in the Korean coastal seas. Journal of the Korean Data & Information Science Society, 28, 811-818.
  3. KS C 0214. (2007). The method standard for environmental tests, Korean Agency for Technology and Standards.
  4. Lee, H. J. (2015). Analysis of statistical models on temperature at the Suwon city in Korea. Journal of the Korean Data & Information Science Society, 26, 1409-1416. https://doi.org/10.7465/jkdi.2015.26.6.1409
  5. MIL-HDBK-310. (1997). Global climatic data for developing military products, U.S. Department of Defense (DoD), Washington, DC.
  6. MIL-STD-810G. (2014). Environmental engineering considerations and laboratory tests, U.S. Department of Defense (DoD), Washington, DC.
  7. Moon, J. Y., Kim, D. G., Sung, I. C. and Hong, Y. W. (2016). A study on the temperature guidelines for weapon system test and evaluation in the Korean peninsula. Journal of the Korean Data & Information Science Society, 27, 1593-1600. https://doi.org/10.7465/jkdi.2016.27.6.1593