DOI QR코드

DOI QR Code

14K 화이트-레드골드의 확산접합 공정에 따른 접합 물성 연구

Bonding Properties of 14K White-Red Gold Alloy by Diffusion Bonding Process

  • 송정호 (서울시립대학교 신소재공학과) ;
  • 송오성 (서울시립대학교 신소재공학과)
  • Song, Jeongho (Department of Materials Science and Engineering, University of Seoul) ;
  • Song, Ohsung (Department of Materials Science and Engineering, University of Seoul)
  • 투고 : 2017.02.27
  • 심사 : 2017.06.19
  • 발행 : 2017.07.27

초록

Using a customized diffusion bonder, we executed diffusion bonding for ring shaped white gold and red gold samples (inner, outer diameter, and thickness were 15.7, 18.7, and 3.0 mm, respectively) at a temperature of $780^{\circ}C$ and applied pressure of 2300 N in a vacuum of $5{\times}10^{-2}$ torr for 180 seconds. Optical microscopy, field emission scanning electron microscopy (FE-SEM), and energy-dispersive X-ray spectroscopy (EDS) were used to investigate the microstructure and compositional changes. The mechanical properties were confirmed by Vickers hardness and shear strength tests. Optical microscopy and FE-SEM confirmed the uniform bonding interface, which was without defects such as micro pores. EDS mapping analysis confirmed that each gold alloy was 14K with the intended composition; Ni and Cu was included as coloring metals in the white and red gold alloys, respectively. The effective diffusion coefficient was estimated based on EDS line scanning. Individual values of Ni and Cu were $5.0{\times}10^{-8}cm^2/s$ and $8.9{\times}10^{-8}cm^2/s$, respectively. These values were as large as those of the melting points due to the accelerated diffusion in this customized diffusion bonder. Vickers hardness results showed that the hardness values of white gold and red gold were 127.83 and 103.04, respectively, due to solid solution strengthening. In addition, the value at the interface indicated no formation of intermetallic compound around the bonding interface. From the shear strength test, the sample was found not to be destroyed at up to 100,000 gf due to the high bonding strength. Therefore, these results confirm the successful diffusion bonding of 14K white-red golds with a diffusion bonder at a low temperature of $780^{\circ}C$ and a short processing time of 180 seconds.

키워드

참고문헌

  1. X. J. Zhang, K. K. Tong, R. Chan and M. Tan, J. Mater. Process. Technol., 48, 603 (1995). https://doi.org/10.1016/0924-0136(94)01699-2
  2. C. F. Shaw, Chem. Rev., 99, 2589 (2009).
  3. L. Ming, S. Yang and C. Cheng, Resour. Policy, 47, 125 (2016). https://doi.org/10.1016/j.resourpol.2016.01.006
  4. C. Cretu and E. Lingen, Gold Bulletin, 32, 115 (1999). https://doi.org/10.1007/BF03214796
  5. K. E. Saeger and J. Rodies, Gold Bulletin, 10, 10 (1977). https://doi.org/10.1007/BF03216519
  6. J. Emsley, Nature's Building Blocks, Oxford University Press, p168 (2001).
  7. H. H. Harris, J. Chem. Educ., 76, 198 (1999). https://doi.org/10.1021/ed076p198
  8. W. S. Rapson, Gold Bulletin, 23, 125 (1990). https://doi.org/10.1007/BF03214713
  9. S. Alex and A Dunne, Design Issues, 15, 11 (1999). https://doi.org/10.2307/1511838
  10. C. W. Corti, Platinum Metals Rev., 56, 242 (2003).
  11. O. J. Kleppa, J. Phys. Chem., 60, 858 (1956). https://doi.org/10.1021/j150541a006
  12. Xie, D. J., Y. C. Chan and J. K. L. Lai, IEEE Trans. Compon. Packaging Manuf. Technol. Part B, 19, 148 (1996). https://doi.org/10.1109/96.486497
  13. X. F. Ang, G. G. Zhang, J. Wei, Z. Chen and C. C. Wong, Thin Solid Films, 504, 379 (2006). https://doi.org/10.1016/j.tsf.2005.09.071
  14. J. W. Lee and C. S. Kang, J. Korean Inst. Met. Mater., 38, 366 (2000).
  15. I. B. MacCormack and J. E. Bowers, Gold Bulletin, 14, 19 (1981). https://doi.org/10.1007/BF03216555
  16. D. A. Porter, K. E. Easterling and M. Y. Sherif, Phase Transformations in Metals and Alloy, CFC Press, 3rd ed., p96 (2009).
  17. E. H. Chung, I. M. Park and Y. H. Park, J. Korean Inst. Met. Mater. 48, 683 (2000).
  18. S. Takeuchi, J. Phys. Soc. Jpn., 27, 929 (1969). https://doi.org/10.1143/JPSJ.27.929
  19. J. H. Ahn, K. S. Kim, Y. C. Lee, Y. I. Kim and S. B. Jung, J. Microelectron. Pack. Soc., 17-3, 1 (2010).