Journal of Korean Society of Environmental Engineers (대한환경공학회지)

Korean Society of Environmental Engineers (대한환경공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Device Installed on the Barrier for The Environmental Noise Reduction in 400 km/h High Speed Railway

400 km/h 고속철도 환경소음저감을 위한 선로 변 벽체 상단장치개발에 관한 연구

  • Received : 2017.11.21
  • Accepted : 2017.12.12
  • Published : 2017.12.31
⟨ Previous Next ⟩

Abstract

Recently, the speed of high-speed railway has been rapidly increase with the development of high-speed train design and operating technology. This causes a lot of complaints related the environmental noise in residential areas near the high-speed railway. In order to operate the high-speed railway in accordance with the design speed, noise reduction technology should be developed to meet the noise characteristics of high-speed railway. And it is important to develop the prediction technology by grasping the noise radiation characteristics. In order to meet these requirements, in recent years, infra-research for 400 km/h high speed railway has been conducted. Reliable noise prediction and noise reduction techniques have been developed through this study. This paper is concerned with wind pressure safety and noise performance evaluation of the newly developed 400 km/h noise reduction device. The wind pressure safety and The noise performance of the developed device was confirmed by this paper.

고속열차의 설계 및 운행기술이 발전하면서 고속철도의 운행속도가 빠르게 증속되고 있다. 반면 증속 시 발생하는 소음으로 인해 고속철도 연변의 주거지역 등에서는 많은 소음문제가 발생하고 있으며, 고속철도 소음에 대한 민원도 지속적인 증가추세에 있다. 향후 고속철도가 원활히 설계속도대로 운행되기 위해서는 고속철도의 방사소음특성에 적합한 소음예측기술 및 저감기술이 개발되어야 한다. 이와 같은 요구에 부합하기 위해, 400 km/h 고속철도 인프라 연구가 수년에 걸쳐 진행되었다. 이 연구를 통해 신뢰성을 갖는 고속철도 소음예측평가 기술이 개발되었고, 현재 소음저감기술의 단점을 극복하기 위한 핵심방음장치가 개발되었다. 본 연구의 궁극적인 목적은 고속철도 환경소음을 줄이기 위해 개발된 선로 변 벽체 상단에 설치되는 상단장치의 소음성능평가 및 풍압안전성 검증에 관한 것이다.

Keywords

Acknowledgement

Supported by : 국토교통부

References

  1. KRISS-97-110-IR, "Development of High-speed Rails Noise Reduction Technologies,"(1998).
  2. KRRI, "A study on the effective reduction methods for railroad noise and vibration,"(2000).
  3. UNISON TECH.,"Environmental acoustic noise & vibration core technology development for 400km/h high speed railway operation,"(2015).
  4. Mellet, C., "High speed train noise emission : Latest investigation of the aerodynamic/rolling noise contribution," J. Sound and Vibrat., 293(3-5), 535-546(2006). https://doi.org/10.1016/j.jsv.2005.08.069
  5. Kim, J. T., "Installation effect on noise reducer for railway traffic noise," J. Korean Soc. Railway, 10(1), 145-149(2007)
  6. Anon., "SYSNOISE Rev.4.4A Manual," NTT, Leuven(1992).
  7. Kim, C. H., "A study on the test method for noise reduction devices installed on the noise barrier," Trans. Korean Soc. Noise & Vibrat. Eng., 20(9), 60-62(2010).
  8. Yoon, J.-W., "A study on the devlopment of a noise reduction device installed at the top of noise barrier for the 400 km/h class high-speed railroad," The Korean Soc. Noise & Vibrat. Eng., 23(9), 823-830(2013). https://doi.org/10.5050/KSNVE.2013.23.9.823
  9. ISO 3095, "Railway applications - Acoustics - Measurement of noise emitted by raibound vehicles,"(2005).
  10. Ministry of Environment No. 2015-85, "Test standard for noise and vibration process,"(2010).
  11. Cho, J.-H., "Suggestion of assessment height for noise measurement according to the vertical radiation characteristics of railway noise," The Korean Soc. Environ. Impact Asses., 23(1), 29-37(2014). https://doi.org/10.14249/eia.2014.23.1.29