International Journal of Naval Architecture and Ocean Engineering

The Society of Naval Architects of Korea (대한조선학회)
권호 표지
DOI QR코드

DOI QR Code

Simulation of a two-stroke diesel engine for propulsion in waves

  • Yum, Kevin Koosup (Department of Marine Technology, Norwegian University of Science and Technology) ;
  • Taskar, Bhushan (Department of Marine Technology, Norwegian University of Science and Technology) ;
  • Pedersen, Eilif (Department of Marine Technology, Norwegian University of Science and Technology) ;
  • Steen, Sverre (Department of Marine Technology, Norwegian University of Science and Technology)
  • Received : 2016.06.01
  • Accepted : 2016.08.25
  • Published : 2017.07.31
Download PDF
⟨ Previous Next ⟩

Abstract

Propulsion in waves is a complex physical process that involves interactions between a hull, a propeller, a shaft and a prime mover which is often a diesel engine. Among the relevant components, the diesel engine plays an important role in the overall system dynamics. Therefore, using a proper model for the diesel engine is essential to achieve the reasonable accuracy of the transient simulation of the entire system. In this paper, a simulation model of a propulsion system in waves is presented with emphasis on modeling a two-stroke marine diesel engine: the framework for building such a model and its mathematical descriptions. The models are validated against available measurement data, and a sensitivity analysis for the transient performance of the diesel engine is carried out. Finally, the results of the system simulations under various wave conditions are analyzed to understand the physical processes and compare the efficiency for different cases.

Keywords

References

  1. Albrecht, A., Grondin, O., Le Berr, F., Le Solliec, G., 2007. Towards a stronger simulation support for engine control design: a methodological point of view. Oil Gas Sci. Technol. Rev. IFP 62 (4), 437-456. http://dx.doi.org/10.2516/ogst:2007039.
  2. Annand, Walter John Dinnie, Roe, Geoffrey Ernest, 1974. Gas Flow in the Internal Combustion Engine: Power, Performance, Emission Control, and Silencing. GT Foulis.
  3. Benson, R.S., Pool, D.E., may 1965. The compressible flow discharge coefficients for a two-dimensional slit. Int. J. Mech. Sci. 7 (5), 337-353. http://dx.doi.org/10.1016/0020-7403(65)90063-9. ISSN 00207403. http://www.sciencedirect.com/science/article/pii/0020740365900639.
  4. Bergman, Theodore L., Incropera, Frank P., DeWitt, David P., Lavine, Adrienne S., 2007. Fundamentals of heat and mass transfer. In: Dekker Mechanical Engineering, vol. 6. John Wiley & Sons, ISBN 9780471457282. http://dx.doi.org/10.1016/j.applthermaleng.2011.03.022. http://www.osti.gov/energycitations/product.biblio.jsp?osti_id=6008324.
  5. Campora, U., Figari, M., 2005. Numerical simulation of ship propulsion transients and full-scale validation. Proc. Inst. Mech. Eng. Part M J. Eng. Marit. Environ. 217 (1), 41-52. http://dx.doi.org/10.1243/147509003321623130. ISSN 1475-0902.
  6. Churchill, S.W., Bernstein, M., may 1977. A correlating equation for forced convection from gases and liquids to a circular cylinder in crossflow. J. Heat Transf. 99 (2), 300-306. http://dx.doi.org/10.1115/1.3450685. ISSN 0022-1481.
  7. el Moctar, Ould, Lantermann, Udo, Mucha, Philipp, Hopken, Jens, Schellin, Thomas E., aug 2014. RANS-based simulated ship maneuvering accounting for hull-propulsor-engine interaction. Ship Technol. Res. 61 (3), 142-161. http://dx.doi.org/10.1179/str.2014.61.3.003. ISSN 0937-7255. http://www.tandfonline.com/doi/abs/10.1179/str.2014.61.3.003.
  8. Faltinsen, O.M., Minsaas, K.J., Liapis, N., Skjordal, S.O., 1980. Prediction of resistance and propulsion of a ship in a seaway. In: 13th Symposium on Naval Hydrodynamics. The Shipbuilding Research Association of Japan, Tokyo, Japan.
  9. Finol, C.A., Robinson, K., 2006. Thermal modelling of modern engines: a review of empirical correlations to estimate the in-cylinder heat transfer coefficient. Proc. Inst. Mech. Eng. Part D J. Automob. Eng. 220 (12), 1765-1781. http://dx.doi.org/10.1243/09544070jauto202. http://pid.sagepub.com/content/220/12/1765.abstract.
  10. Ghojel, J.I., aug 2010. Review of the development and applications of the Wiebe function: a tribute to the contribution of Ivan Wiebe to engine research. Int. J. Engine Res. 11 (4), 297-312. http://dx.doi.org/10.1243/14680874JER06510. ISSN 1468-0874. http://jer.sagepub.com/content/11/4/297.short.
  11. Hepperle, Martin, 2007. JavaFoil. http://www.mh-aerotools.de/airfoils/javafoil.htm.
  12. Heywood, J.B., 1988. Internal Combustion Engine Fundamentals. McGraw Hill.
  13. Karnopp, Dean, 1979. State variables and pseudo bond graphs for compressible thermofluid systems. In: National Conference Publication - Institution of Engineers, Australia, pp. 861-865. http://www.scopus.com/inward/record.url?eid=2-s2.0-0018680832&partnerID=40&md5=50fdb71a5e858a73457b5f4a1880ad9b.
  14. Kyrtatos, N.P., Theodossopoulos, P., Theotokatos, G., Xiros, N.I., 1999. Simulation of the overall ship propulsion plant for performance prediction and control. In: MarPower99 Conference, (JANUARY 1999).
  15. Loukakis, T.A., Sclavounos, P.D., 1978. Some extensions of the classical approach to strip theory of ship motions, including the calculation of mean added forces and moments. J. Ship Res. 22 (1).
  16. Minsaas, K., Faltinsen, O., Persson, B., 1983. On the importance of added resistance, propeller immersion and propeller ventilation for large ships in a seaway. In: Second International Symposium on Practical Design in Shipbuilding (PRADS), pp. 149-159. Seoul and Tokyo.
  17. Papanikolaou, A., Zaraphonitis, G., Tech, Nat, Shigunov, V., El Moctar, O., 2014. Energy efficient Safe ship operation (Shopera). Influ. EEDI Ship Des. 1 (2012), 24-25.
  18. Pedersen, Eilif, Engja, Hallvard, 2000. A bond graph model library for modelling diesel engine transient performance. In: ISME Tokyo 2000, vol. 2, pp. 447-455. Tokyo.
  19. Rakopoulos, Constantine D., Giakoumis, E.G., 2006. Review of thermodynamic diesel engine simulations under transient operating conditions. SAE Paper (2006-01):884.
  20. Sher, E., 1990. Scavenging the two-stroke engine. Prog. Energy Combust. Sci. 16 (2), 95-124. https://doi.org/10.1016/0360-1285(90)90045-5
  21. Taskar, Bhushan, Koosup Yum, Kevin, Steen, Sverre, Pedersen, Eilif, 2016. The effect of waves on engine-propeller dynamics and propulsion performance of ships. Ocean Eng. 122, 262-277. http://dx.doi.org/10.1016/j.oceaneng.2016.06.034. http://dx.doi.org/10.1016/j.oceaneng.2016.06.034.
  22. Winterthur Gas & Diesel, 2015. General Technical Data. https://www.wingd.com/en/media/general-technical-data/.
  23. Wu, Ping-Chen, 2013. A CFD Study on Added Resistance, Motions and Phase Averaged Wake Fields of Full Form Ship Model in Head Waves. Osaka University. Doctoral dissertation. http://ir.library.osaka-u.ac.jp/dspace/handle/11094/26191.
  24. Yang, Jianguo,Wang, Qinpeng, 2013. Hardware-in-Loop simulation technology of high-pressure common-rail electronic control systemfor low-speed marine diesel engine. In: Bari, Saiful (Ed.), Diesel Engine - Combustion, Emissions and Condition Monitoring, Chapter 10. InTech, ISBN 978-953-51-1120-7, p. 278. http://www.intechopen.com/books/diesel-engine-combustion-emissions-and-condition-monitoring.
  25. Yum, K.K., Pedersen, E., 2016. Architecture of Model Libraries for Modeling Internal Combustion Engines. Mathematical and Computer Modelling of Dydnamical Systems (Submitted for review).
  26. Yum, Kevin Koosup, Tasker, Bhushan, Skjong, Stian, Pedersen, Eilif, Steen, Sverre, 2016. Simulation of a Hybrid marine propulsion system in waves. In: Proceedings of 28th CIMAC World Congress, Number 202. CIMAC, Helsinki.
  27. Zacharias, F., 1967. Analytical representation of the thermodynamic properties of combustion gases. SAE Technical Paper, 670930. http://dx.doi.org/10.4271/670930.

Cited by

  1. CODLOG 기반 ECS 검증용 함정 추진 시뮬레이터 개발 vol.21, pp.9, 2017, https://doi.org/10.6109/jkiice.2017.21.9.1796
  2. Engine Modelling of a Single Cylinder Diesel Engine Fuelled by Diesel-Methanol Blend vol.506, pp.None, 2017, https://doi.org/10.1088/1757-899x/506/1/012014
  3. Improving pre-turbine selective catalytic reduction systems in marine two-stroke diesel engines using hybrid turbocharging: A numerical study of selective catalytic reduction operation range and syste vol.234, pp.2, 2020, https://doi.org/10.1177/1475090219881930
  4. Response of a direct-drive large marine two-stroke engine coupled to a selective catalytic reduction exhaust aftertreatment system when operating in waves vol.234, pp.3, 2017, https://doi.org/10.1177/1475090219899543