KSCE Journal of Civil and Environmental Engineering Research (대한토목학회논문집)

Korean Society of Civil Engeneers (대한토목학회)
권호 표지
DOI QR코드

DOI QR Code

Mechanical Properties of Filling Materials for Bored Pile in Rock

암반매입말뚝을 위한 주면고정액의 역학적 특성

  • Received : 2017.01.16
  • Accepted : 2017.05.21
  • Published : 2017.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

Jeju Island is composed of irregular volcanic rock layers formed by several volcanic activities. Since structure such as the offshore wind turbine has to support considerably large over turning moment due to long distance from foundation to load point and relatively large horizontal load. Pile foundations are needed to economically support such structure even in the case of rock layer. Therefore, in this study, mechanical performances are estimated by mixing ratio of water, cement, and sand to figure out optimal mixing ration of filling material for pile penetrated to rocky layers, and outcomes of this study are compared and analyzed with results of other researches. In the same conditions, mechanical performances of the mortar (S/(S+C)=20~40%) are better than those of cement paste and soil cement. On the basis of major outcome of this study, appropriate range of mixing and a strengthening model are suggested.

제주도는 여러 차례의 화산활동에 의해 형성된 섬으로 불규칙한 화산암층 구조를 가지고 있다. 해상풍력발전기와 같은 구조물은 기초에서부터 하중 작용점까지의 거리가 멀고 상대적으로 큰 수평하중이 작용하여 매우 큰 전도모멘트를 지지해야 한다. 이러한 구조물을 경제적으로 지지하기 위해서는 암반층이라도 말뚝기초를 시공해야 한다. 따라서 본 연구에서는 암반매입말뚝을 위한 주면고정액의 적정배합비를 찾기 위하여 물, 시멘트, 모래의 배합비를 달리하여 역학적 성능을 평가하고, 실험 결과와 기존 연구 결과를 비교분석하였다. 동일한 배합조건에서 시멘트풀과 소일시멘트보다 모르타르(잔골재 비=20~40%)의 역학적 성능이 우수하게 나타났다. 이 결과를 바탕으로 적정배합범위와 강도추정식을 제안하였다.

Keywords

References

  1. Do, J., Nam, M, Shim, J., Park, Y. and Lee, S. (2015). "Engineering characteristics of cement milk for bored piles." Jour. of the Korean Geotechnical Society, KGS, Vol. 31, No. 12, pp. 29-43 (in Korean). https://doi.org/10.7843/KGS.2015.31.12.29
  2. Eon, N., Yun, S., Park, W., Yun, H. and Kim, D. (2013). "The compressive strength characteristics of cement paste containing blast furnace slag with elapsed curing time." Proc. of 2013 Korea Concrete Istitute conference, KCI, Gangwon, Korea, pp. 227-228 (in Korean).
  3. Haach, V. G., Vasconcelos, G. and Lourenço, P. B. (2011). "Influence of aggreagates grading and water/cement ratio in workability and hardened properties of mortars." Construction and Building Materials, Vol. 25, No. 6, pp. 2980-2987. https://doi.org/10.1016/j.conbuildmat.2010.11.011
  4. Hong, W., Lee, J. and Chai, S. (2008). "Bearing capacity of SDA augered piles in various grounds depending on water-cement ratio of cement milk." Jour. of the Korean Geotechnical Society, KGS, Vol. 24, No. 5, pp. 37-54 (in Korean).
  5. Korean Geotechnical Society. (2015). Code requirements for structural foundation design, pp. 364-369 (in Korean).
  6. Mun, T., Kang, C. and Lee, H. (2009). " Characteristics of physical properties according to compound condition of grout mortar." Jour. of Korean Society of Explosives & Blasting Engineering, KSEE, Vol. 27, No. 1, pp. 32-37 (in Korean).
  7. Park, J. (2004). "Strength and friction behavior of cement paste poured in the bored pile." Jour. of the Korean Geo-Environmental Society, KGES, Vol. 5, No. 3, pp. 31-39 (in Korean).
  8. Park, S., Kwon, S. and Kim, T. (2009). "An experimental study on the durability characterization using porosity." Jour. of the Korean Society of Civil Engineers, KSCE, Vol. 29, No. 2, pp. 171-179 (in Korean).
  9. Singh, S.B., Munjal, P. and Thammishetti, N. (2015). "Role of water/cement ratio on strength development of cement mortar." Jour. of Building Engineering, Vol. 4, pp. 94-100. https://doi.org/10.1016/j.jobe.2015.09.003
  10. Yoon, S.H. and Ko, K.W. (2011). Topography, geology, and underground water in Jeju Island, Nae Ha Publishing Company