DOI QR코드

DOI QR Code

A Experimental Study on the Structural Performance of Precast Bracket under Precast Road Deck Slab of Double Deck Tunnel

복층터널에서 도로용 중간슬래브와 연결되는 조립식 브라켓의 구조성능에 관한 실험연구

  • Received : 2017.02.17
  • Accepted : 2017.06.13
  • Published : 2017.08.01

Abstract

The main purpose of this study is to investigate the static & dynamic behavior of a precast bracket under precast road deck slab of double deck tunnel. In order to improve the construction speed, the field prefabricated bracket to connect the intermediate slab to the precast shield tunnel lining structure has been developed in the 'SPC (Steel Precast Concrete) bracket'. The experiments were performed for the full scale model in order to evaluate the performance of the 'SPC bracket', the structural stability was verified through the FEM analysis. The result of static loading test, no deformations or cracks of the bracket undergo the ultimate load was investigated. In addition, no pulling or deformation of the chemical anchor for fixing the bracket was measured. As a result of dynamic loading test, it was investigated that there is no problem in the chemical anchor for fixing the bracket. FEM analysis showed similar behavior to static load test and it was determined that there is no problem in serviceability and structural safety.

이 연구에서는 대심도 복층터널을 구성하는 중간슬래브의 하중을 터널본체에 전달하는 브라켓 구조에 관한 정 동적 거동을 조사하였다. 시공속도 향상을 위해 중간슬래브를 프리캐스트 쉴드 터널라이닝 구조체에 연결하기 위한 현장 조립형 'SPC (Steel Precast Concrete) 브라켓'을 개발하였다. 'SPC (Steel Precast Concrete) 브라켓'의 구조 성능을 평가하기 위해서 실물모형 구조실험을 수행하였으며, Contact 모델을 적용한 FEM 해석을 통해서 구조적인 안정성을 추가로 검증하였다. 정적재하실험을 수행한 결과 극한하중에 대한 브라켓의 변형이나 균열은 계측되지 않았으며, 브라켓 고정용 케미컬 앵커의 뽑힘이나 변형은 발생되지 않았다. 동적재하실험 결과 케미컬 앵커의 이상은 조사되지 않았다. FEM해석에 따른 브라켓의 거동은 정적재하실험 결과와 유사한 거동을 보여 사용성 및 구조 안정성 측면에서 문제가 없다고 판단된다.

Keywords

References

  1. Kim, B. Y., Lee, D. S., Choi, W. S. and Kim, K. Y. (2016). "An experimental study on precast road deck slab of double deck tunnel in great depth under fatigue loads." Proceeding of the Korea Society of Civil Engineering , KSCE, pp. 89-90 (in Korean).
  2. Kim, B. Y., Lee, D. S., Kim, T. K. and Kim, Y. J. (2016). "An experimental study for the improvement of construction speed on PC and steel bracket." Proceeding of the Korea Society of Civil Engineering , KSCE, pp. 91-92 (in Korean).
  3. Kim, B. Y., Lee, D. S., Kim, T. K., Bae, C. K. and Kim, J. G. (2016). "The experimental study on transverse field connection method of precast road deck slab of double deck tunnel in great depth." Proceeding of the Korea Concrete Institute, KCI, pp. 125-126 (in Korean).
  4. Kim, T. K., Bae, J., Choi, H. and Min, I. G. (2012). "Experimental studies on PSC airpit-slab with fire resistance panel under static and dynamic loads." Journal of the Korean Society of Civil Engineers, Vol. 32, No. 4A (in Korean).
  5. Korean Concrete Institute. (2012) "Design specifications for structural concrete." Seoul, Korea.
  6. Korean Society of Steel Construction. (2011). "Korean steel structure design code and commentary-load and resistance factored design."
  7. Lee D. S., Kim, B. Y., Bae, C. G. and Hur, J. H. (2017). "The experimental study on transverse field joint method of precast road deck slab of double deck tunnel in great depth." Proceeding of the Korea Concrete Institute, KCI, pp. 23-32 (in Korean).
  8. MIDAS IT, Analysis & Algorithm. (2004).