Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

Study on the Photoelectric Composite Cable for Hybrid Interconnection Implementation

Hybrid 인터커넥션 구현을 위한 광전 복합케이블 제작에 관한 연구

  • Kim, Jae-Yeol (Dept. of Mechanical Systems and Automotive Engineering, Chosun Univ.) ;
  • You, Kwan-Jong (Dept. of Division of undeclared Majors, Chosun Univ.) ;
  • Park, Ryeok (Dept. of Mechanical Engineering, Graduate school of Chosun Univ.)
  • 김재열 (조선대학교 기계시스템 미래자동차공학부) ;
  • 유관종 (조선대학교 자유전공학부) ;
  • 박력 (조선대학교 일반대학원 기계시스템공학과)
  • Received : 2017.03.22
  • Accepted : 2017.05.29
  • Published : 2017.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

With the increasing use of smart electronic devices, the size of the related I/O interface market is increasing rapidly. Demand is also growing for the continuous increase of data and video signals-such as faster data processing speed and data storage capacity-in the smart electronic device input/output interface market. Currently, the POF hybrid cable used in the smart electronic device input / output interface market cannot transmit over a long distance because the optical loss is too large, and the GOF hybrid cable is both vulnerable to bending and other sudden outside changes, and expensive. Therefore, in this study, the design and fabrication of a GOF hybrid cable and fiber guide were carried out in order to develop a cable which can easily withstand external impact, has low optical losses, and meets the demand for continuous data and video signal increase in the smart electronic device input / output interface market.

Keywords

Acknowledgement

Supported by : 조선대학교

References

  1. Park, S., Kim, K. J., Kim, D. J., Park, J. Y., Kwak, H. S,. "Computational Thermo-Fluid Analysis for the Effects of Helium Injection Methods on Glass Fiber Cooling Process in an Optical Fiber Manufacturing System," Journal of the Korean Society of Manufacturing Process Engineers, Vol.13, No. 2, pp. 124-130, 2014. https://doi.org/10.14775/ksmpe.2014.13.2.124
  2. Kim, B. C., Lee, S. H,. "Precision Profile Measurement on Roughly Processed Surfaces," Journal of the Korean Society of Manufacturing Process Engineers, Vol.7, No.1, pp. 47-52, 2008.
  3. Kim, B. C,. "System calibration method for Silicon wafer warpage measurement," Journal of the Korean Society of Manufacturing Process Engineers, Vol.13, No.6, pp. 139-144, 2014. https://doi.org/10.14775/ksmpe.2014.13.6.139
  4. Seo, J. S., Lee, Y. J., Kim, J. W., Park, D. S,. "Design Improvement and Performance Evaluation of 20kHz Horn for Ultrasonic Cutting," Journal of the Korean Society of Manufacturing Process Engineers, Vol.12, No.5, pp. 135-140, 2013.
  5. Lee, C. H., Kim, D. M., Yang, H. S., Kim, S. H,. "Design and Analysis of Cryogenic Turbo Expander for HTS Power Cable Refrigeration System," Journal of the Korean Society of Manufacturing Process Engineers, Vol.14, No.3, pp. 141-148, 2015. https://doi.org/10.14775/ksmpe.2015.14.3.141
  6. Kim, B. H., Kang, H. J., Seo, J. H,. "A Study on the Optimal Design of a Robotic Welding System for a High-strength Steel Amor Plate," Journal of the Korean Society of Manufacturing Process Engineers, Vol.15, No.5, pp. 31-38, 2016. https://doi.org/10.14775/ksmpe.2016.15.5.031
  7. Han, G. Y., Jung, U. C., Yang, I. Y., Seon, H. S,. "Shielding Effectiveness of Electromagnetic Interference in ABS/Nickel Coated Carbon Fiber and Epoxy/Cu-Ni Fabric Nano Carbon Black Composites," Journal of the Korean Society of Manufacturing Process Engineers, Vol.11, No.6, pp. 169-174, 2012.
  8. Kwak, H. S., Park, S., Kim, K. J., Park, J. Y,. "Computational Thermo-Fluid Analysis for the Effects of Helium Injection Methods on Glass Fiber Cooling Process in an Optical Fiber Manufacturing System," Journal of the Korean Society of Manufacturing Process Engineers, Vol.13, No.2, pp. 124-130, 2014. https://doi.org/10.14775/ksmpe.2014.13.2.124
  9. Kim, S. H., Lee, C. H., Yang, H. S,. "Design and Analysis of Cryogenic Turbo Expander for HTS Power Cable Refrigeration System," Journal of the Korean Society of Manufacturing Process Engineers, Vol.14, No.3, pp. 171-148, 2015.
  10. Park, D. S., Seo, J. S,. "Optical Welding condition in Ultrasonic Welding of Ni steel sheet," Journal of the Korean Society of Manufacturing Process Engineers, Vol.9, No.2, pp. 47-52, 2010.

Cited by

  1. 케이블 트레이 설계시스템 개발 vol.16, pp.4, 2017, https://doi.org/10.14775/ksmpe.2017.16.4.089
  2. 500W급 광섬유 레이저 출력 전송 모듈 End Cap의 구조 및 열전달 해석 vol.16, pp.4, 2017, https://doi.org/10.14775/ksmpe.2017.16.4.135
  3. 4C의 MM Optical Fiber를 수용 가능한 Fiber Guide의 구조해석 vol.16, pp.6, 2017, https://doi.org/10.14775/ksmpe.2017.16.6.075