References
- J. H. Hwang, H. Ryu, and U. R. Cho, "A study on starch-acrylic graft copolymerization by emulsion polymerization", Elastomer, 43, 221 (2008).
- M.-S. Lee, H. Ryu and U. R. Cho, "A study on the synthesis of starch-acrylic polymer by emulsion polymerization", Polymer(Korea), 34, 58 (2010).
- M.-C. Li, Y.-J. Mun and U. R. Cho, "Synthesis of environmental-friendly starch-acrylic coating sols by emulsion polymerization", Elast. and Compos., 45, 272 (2010).
- M.-C. Li, J. K Lee and U. R. Cho, "Synthesis, characterization, and enzymatic degradation of starch?grafted poly (methyl methacrylate) copolymer films", J. Appl. Polym. Sci., 125, 405 (2012). https://doi.org/10.1002/app.35620
- C. G. Cho and K. Lee, "Preparation of starch-g-polystyrene copolymer by emulsion polymerization", Carbo. Polym., 48, 125 (2002). https://doi.org/10.1016/S0144-8617(01)00222-3
- J. M. Fang, P. A. Folwer, and C. A. S. Hill, "Studies on the grafting of acryloylated potato starch with styrene", J. Appl. Polym. Sci., 96, 452 (2005). https://doi.org/10.1002/app.21464
- M. K. Beliakova, A. A. Aly and F. A. Abdel-Mohdy, "Grafting of poly (methacrylic acid) on starch and poly (vinyl alcohol)", Starch-Starke, 56, 407 (2004). https://doi.org/10.1002/star.200300246
-
K. Mostafa and M. Morsy, "Modification of carbohydrate polymers via grafting of methacrylonitrile onto pregelled starch using potassium monopersulfate/
$Fe^{2+}$ redox pair", Polym. Int., 53, 885 (2004). https://doi.org/10.1002/pi.1449 - D. L. Pavia, G. M. Lampman, G. S. Kriz, and J. R. Vyvyan, "Introduction to spectroscopy", 4th Eds., p. 47, Brooks/Cole Cengage Learning, CA, 2009.
- K. Kaewtatip and V. Tanrattanakul, "Preparation of cassava starch grafted with polystyrene by suspension polymerization", Carbo. Polym., 73, 647 (2008). https://doi.org/10.1016/j.carbpol.2008.01.006
- C. Liu, Y. Shao, and D. Jia, "Chemically modified starch reinforced natural rubber composites", Polymer, 49, 2176 (2008). https://doi.org/10.1016/j.polymer.2008.03.005
- S.-S. Choi, B.-H. Park, and H. Song, "Influence of filler type and content on properties of styrene-butadiene rubber (SBR) compound reinforced with carbon black or silica", Polym. Adv. Technol., 15, 122 (2004). https://doi.org/10.1002/pat.421
- M. A. Lopez-Manchado, M. Arroyo, B. Herrero, and J. Biagiotti, "Vulcanization kinetics of natural rubberorganoclay nanocomposites", J. Appl. Polym. Sci., 89, 1 (2003). https://doi.org/10.1002/app.12082
- G. Mathew, J. M. Rhee, Y.-S. Lee, D. H. Park, and C. Nah, "Cure kinetics of ethylene acrylate rubber/clay nanocomposites", J. Ind. Eng. Chem., 14, 60 (2008). https://doi.org/10.1016/j.jiec.2007.07.001
- Z. A. M. Ishak and H. Ismail, "An investigation on the potential of rice husk ash as fillers for epoxidized natural rubber (ENR)", Eur. Polym. J., 31, 259 (1995). https://doi.org/10.1016/0014-3057(94)00156-1
- H. Ismail, J. M. Nizam, and H. P. S. Abdul Khalil, "The effect of a compatibilizer on the mechanical properties and mass swell of white rice husk ash filled natural rubber/linear low density polyethylene blends", Polym. Test., 20, 125 (2001). https://doi.org/10.1016/S0142-9418(00)00013-1
- M. Jacob, S. Thomas, and K. T. Varughese, "Mechanical properties of sisal/oil palm hybrid fiber reinforced natural rubber composites", Compos. Sci. Technol., 64, 955 (2004). https://doi.org/10.1016/S0266-3538(03)00261-6
- H. Ismail, H. D. Rozman, R. M. Jaffri, and Z. A. Mohd Ishak, "Oil palm wood flour reinforced epoxidized natural rubber composites: The effect of filler content and size", Eur. Polym. J., 33, 1627 (1997). https://doi.org/10.1016/S0014-3057(97)00020-7
- R. M. Mariano, P. H. D. S. Picciani, R. C. R. Nunes, and L. L. Y. Visconte, "Preparation, structure, and properties of montmorillonite/cellulose II/natural rubber nanocomposites", J. Appl. Polym. Sci., 120, 458 (2011). https://doi.org/10.1002/app.33159
- H. Ismail, S. M. Shaari, and N. Othman, "The effect of chitosan loading on the curing characteristics, mechanical and morphological properties of chitosan-filled natural rubber (NR), epoxidised natural rubber (ENR) and styrene-butadiene rubber (SBR) compounds", Polym. Test., 30, 784 (2011). https://doi.org/10.1016/j.polymertesting.2011.07.003
- J. Butler and P. K. Freakley, "Effect of humidity and water content on the cure behavior of a natural-rubber accelerated sulfur compound", Rubb. Chem. Technol., 65, 374 (1991).
- R. C. R. Nunes and E. B. Mano, "Influence of cellulose as a filler in vulcanized rubber composites", Polym. Compos., 16, 421 (1995). https://doi.org/10.1002/pc.750160511
- A. K. Bledzki and J. Gassan, "Composites reinforced with cellulose based fibres", Prog. Polym. Sci., 24, 221 (1999). https://doi.org/10.1016/S0079-6700(98)00018-5
- S. Stankovich, R. D. Piner, S. T. Nguyen, and R. S. Ruoff, "Synthesis and exfoliation of isocyanate-treated graphene oxide nanoplatelets", Carbon, 44, 3342 (2006). https://doi.org/10.1016/j.carbon.2006.06.004
- M. J. John and R. D. Anandjiwala, "Chemical modification of flax reinforced polypropylene composites", Compos. Part A: Appl. Sci. Manuf., 40, 442 (2009). https://doi.org/10.1016/j.compositesa.2009.01.007