한국전자통신학회논문지 (The Journal of the Korea institute of electronic communication sciences)

한국전자통신학회 (Korea Institute of Electronic Communication Science)
권호 표지
DOI QR코드

DOI QR Code

휴먼 카운팅 시스템을 위한 공기 유전체 층을 갖는 광대역 패치 안테나

Broadband Patch Antenna with the Air-Dielectric for the Human Counting System

  • 최현호 (호남대학교 전기전자공학과) ;
  • 윤태순 (호남대학교 전자공학과)
  • 투고 : 2017.04.21
  • 심사 : 2017.08.01
  • 발행 : 2017.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 논문에서는 휴먼 카운팅 시스템을 위한 광대역 패치 안테나가 공기 유전체 층을 이용하여 설계, 제작 및 측정되었다. 제안된 안테나는 5 mm의 공기 유전체 위에 정사각형 구조의 패치 구조를 가지며, CPW 전송선로 구조의 입력부와 패치면의 수직 연결은 계단형 임피던스 구조로 구현하였다. 3차원 EM 설계를 통해 최적화된 광대역 패치 안테나는 16.6 * 16.6 * 5.0 mm3의 크기로 3D 프린터를 이용하여 안테나 지그를 제작하여 지그 위에 제작되었다. 제작된 안테나는 7.2 ~ 9.8 GHz 주파수에서 2:1 이하의 VSWR과 5.71 dBi의 최대 이득을 가지며, $70^{\circ}$의 반전력 빔폭 특성을 나타내었다.

In this paper, the broadband patch antenna for human counting systems is designed and fabricated using by the air dielectric substrate. Proposed antenna has a patch structure of the square structure with a 5 mm air layer and the vertical connection between the patch antenna and CPW feeding line is realized the stepped impedance structure. Optimized antenna through a 3D EM simulator is fabricated on a jig by manufacturing an antenna jig using a 3D printer with a size of 16.6 * 16.6 * 5 mm3. Proposed antenna is measured with the maximum gain of 5.71 dBi and the VSWR of below 2:1 at a frequency of 7.2 to 9.8 GHz. Also, a half power beam width characteristic of the antenna is measured $70^{\circ}$.

키워드

참고문헌

  1. K. Lee, H. Sim, and J. Oh, "The Design and Implementation of Intruder Access Control System by based of Ubiquitous Sensor Network," J. of the Korea Institute of Electronic Communication Sciences, vol. 7, no. 5, 2012, pp. 1165-1171. https://doi.org/10.13067/JKIECS.2012.7.5.1165
  2. H. Cha and W. Lee, "Development of Standing and Moving Human Body Sensing Module Using a Chopper of Shutter Method," J. of the Institute of Electronics and Information Engineers, vol. 53, no. 2, 2016, pp. 109-116. https://doi.org/10.5573/ieie.2016.53.2.109
  3. H. Son and H. Park, "A Study on a Human Body Detection Secsor Using Microwave Radiometer Technologies," J. of the Korea Institute of Electronic Communication Sciences, vol. 10, no. 3, 2015, pp. 333-340. https://doi.org/10.13067/JKIECS.2015.10.3.333
  4. T. S. Yun, "Harmonic-Suppressed Hairpin Bandpass Filter for the Microwave Radiometer," J. of the Korea Institute of Electronic Communication Sciences, vol. 9, no. 10, 2014, pp. 1169-1174. https://doi.org/10.13067/JKIECS.2014.9.10.1169
  5. K. Gupta, R. Garg, I. Bhal, and P. Bhartia, Microstrip Lines and Slotlines (Boston): Artech House, 1996.
  6. S. Rhee, S. Lee, and O. Kim, "Stepped Impedance LPF Using MCSI," J. of the Korea Institute of Electronic Communication Sciences, vol. 3, no. 3, 2008, pp. 153-157.
  7. R. Simons, Coplanar Waveguide Circuits, Components, and Systems (New York): Wiley, 2001.
  8. S. Gevorgian, L. Peter, and E. Kollberg, "CAD Models for Shielded Multilayered CPW," IEEE Trans. Microwave Theory and Tech., vol. 43, no. 4, Apr. 1995, pp. 772-779. https://doi.org/10.1109/22.375223
  9. S. Lee, "Analysis of the Effects by Multi-Stack-ing of Superstrates on Circular-Polarized Patc-h Antenna," J. of the Institute of Electronics and Information Engineers, vol. 51, no. 3, 2014, pp. 202-209. https://doi.org/10.5573/ieie.2014.51.3.202
  10. H. Lee, "The Design and Fabrication for Wireless Repeater Patch Antenna if Wide-band Dual Polarization," J. of the Korea Institute of Electronic Communication Sciences, vol. 7, no. 6, 2012, pp. 1287-1292. https://doi.org/10.13067/JKIECS.2012.7.6.1287