DOI QR코드

DOI QR Code

Behavior on the wear and friction of sealing composite for ship machinery

선박기계용 실링 복합재료의 마모 및 마찰거동

  • LEE, Jung-Kyu (Department of Mechanical System Engineering, Pukyong National University) ;
  • KOH, Sung Wi (Department of Mechanical System Engineering, Pukyong National University)
  • 이정규 (부경대학교 기계시스템공학과) ;
  • 고성위 (부경대학교 기계시스템공학과)
  • Received : 2017.02.19
  • Accepted : 2017.03.20
  • Published : 2017.05.31

Abstract

In order to use PUR/CuO Composites as the sealing materials for ships equipment, this research has been performed. PUR/CuO composites are produced by using ultrasonic waves. The increase of CuO leads to increase in the tensile strength and shore hardness. The cumulative wear volume shows a tendency to increase in proportional to sliding distance. As the CuO particles of these composites indicated, the friction coefficient was slightly increased. The major failure mechanisms were lapping layers, deformation of matrix, plowing, debonding of particles and microcracking by scanning electric microscopy photograph of the wear tested surface.

Keywords

References

  1. Badmos AY and Ivey D. 2001. Characterization of structural alumina ceramics used in ballistic armour and wear application. J Mat Sci 36, 4995-5005. (DOI:10.1023/A:1011885631876)
  2. Chand N, Naik A and Neogi S. 2000. Three-body abrasive wear of short glass fibre polyester composite. Wear 242, 38-46. https://doi.org/10.1016/S0043-1648(00)00398-7
  3. Choi SH and Jeong YJ. 2014. Carbon nanotubes reinforced poly(ethylene terephthalate) nanocomposites. Polymer(Korea) 38, 240-249.
  4. Dasari A, Yu ZZ and Mai YW. 2009. Fundamental aspect and recent progress on wear/scratch damage in polymer nanocomposites. Mat Sci Tech 63, 31-80.
  5. Kim BT and Koh SW. 2008. A study on abrasive wear characteristics of side plate of FRP ship. J Korean Soc Fish Technol 44(3), 250-256. (DOI:10.3796/KSFT.2008.44.3.250)
  6. Kim EB, Kim JT, Kim SY and Ju CS. 2011. Synthesis of copper-poly tetrafluoro- ethylene composite by supercritical impregnation process, Kor J Chem Eng 28(2), 440-444. (DOI:10.1007/sl1814-010-0374-5)
  7. Kim HY, Lee JK and Koh SW. 2014. An experimental study of the friction and wear on counterpart roughness of silica particle reinforced nano composites, J Korean Soc Fish Technol 50, 162-168. (DOI:10.3796/KSFT.2014.50.2.162)
  8. Kim JD, Kim HJ, Koh SW and Kim YS. 2010a. Wear properties of epoxy matrix nanocomposites. J Kor Soc Pow Sys Eng 14(6), 83-88.
  9. Kim SY, Kim EB, Yoo Q and Ju CS. 2010b. Tribological wear behavior of PTFE impregnated with Cu nano particles. J Kor Soc Pow Sys Eng 14(4), 50-55.
  10. Kim YZ, Eum SH and Kim YH. 1999. Effect of additives on the friction and wear properties of PTFE composites. Proc Kor Soc Comp Mat Conf, 88-94.
  11. Larsen T, Anderson TL and Vigild E. 2008. Changes in the tribological behavior of an epoxy resin by incorporating CuO nano particles and PTFE micro particles. Wear 265, 203-213. https://doi.org/10.1016/j.wear.2007.10.003
  12. Lee HY. 2013. Effect of combination of the load and the apparent area of contact on sliding wear behavior of mild steel in a pin-on disc type apparatus. J KSTLE 29, 85-90. (DOI:10.9725/kstle.2013.29.2.085)
  13. Lee JK and Koh SW. 2013. Wear characteristics on particle volume fraction of nano silica composite materials. J Korean Soc Fish Technol 49, 492-499. (DOI:10.3796/KSFT.2013.49.4.492)
  14. Masa A, Saito R, Saito H, Skai T, Kaesaman A and Lopattananon N. 2016. Phenolic resin-crosslinked natural rubber/clay nanocomposites:Influence of clay loading and interfacial adhesion on strain-induced crystallization behavior. J Appl Polym Sci 133, 43212.
  15. Ravikiran A and Jahanmir S. 2001. Effect of contact pressure and load on wear of alumina. Wear 251, 980-984. https://doi.org/10.1016/S0043-1648(01)00739-6
  16. Ren JR, Kim KY and Kim SS. 2001. Tribological evaluation of dental composite resins containing prepolymerized particle fillers. KSME Int J 15(6), 727-734.
  17. Shi Y, Feng X and Lu X. 2008. The effect of surface modification on the friction and wear behavior of carbon nano fiber filled PTFE composites, Wear 264, 934-939. https://doi.org/10.1016/j.wear.2007.06.014
  18. Youn JH and Kaang S. 2014. Wear behavior of C/B filled NR compounds using a blade-type abrader. Ela Comp 49, 73-81. (DOI:10.7473/EC.2014.49.1.73)