Acknowledgement
Supported by : 한국연구재단
DOI QR Code
This study evaluates the machining accuracy of the custom abutment design according to the selected convergence angle and radius of curvature value in the CAD program. Ten custom abutments were designed based on dental CAD. And then, the fabricated custom abutment was scanned ten times using a contact scanner. The data of the scanned custom abutment was saved as "Test STL" file. The Geomagic studio software was used to superposition each exported as an "Test STL" file with the CAD-reference-model STL file (CRM) specified by the same name. In the experimental results, the A8 group (convergence angle
본 연구는 맞춤형 지대주 (custom abutment) 설계 시 CAD 프로그램 내에서 선택된 수렴 각 그리고 곡률 반경 값 사용에 따른 가공 정확도를 평가하고자 한다. 치과용 CAD를 기반으로 10개의 맞춤형 지대주를 설계하였다. 제작된 맞춤형 지대주를 정밀 접촉식 스캐너를 이용하여 한 개의 시편을 10회 반복 스캔하였다. 스캔 된 맞춤형 지대주의 데이터는 "Test STL" 파일로 지정하여 저장하였다. Geomagic studio 소프트웨어를 이용하여 각 "Test STL" 파일과 동명 번호로 지정하여 저장된 CAD-reference-model STL 파일 (CRM)과 중첩하였다. 실험 결과에서 A8 군(수렴 각
Supported by : 한국연구재단