한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제16권4호
  • /
  • Pages.30-37
  • /
  • 2017
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

다구찌법을 이용한 자동차용 카본 휠 성형공정에 관한 연구

A Study on the Molding Process of Carbon Fiber Automotive Wheels by Taguchi method

  • 류미라 (부산과학기술대학교 자동차 계열) ;
  • 전환영 (김해대학교 기계자동차공학과) ;
  • 박철현 (김해대학교 기계자동차공학과) ;
  • 배희은 (동아대학교 대학원 기계공학과) ;
  • 배효준 (동의대학교 기계공학과)
  • Ryu, Mi-Ra (Division of Automobile and Busan Institude of Science and Technology) ;
  • Jeon, Hwan-Young (Department of Mechanical and Automotive Design, Gimhae college) ;
  • Park, Chul-Hyun (Department of Mechanical and Automotive Design, Gimhae college) ;
  • Bae, Hui-Eun (Department of Mechanical Engineering, DongA University) ;
  • Bae, Hyo-Jun (Department of Mechanical Engineering, Dong-Eui University)
  • 투고 : 2017.05.24
  • 심사 : 2017.06.08
  • 발행 : 2017.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Weight reduction of the wheel is exerts a great influence on the running performance of the vehicle, a lot of research for a lightweight aluminum wheels progress. In order to select the molding conditions through the experiment on the carbon fiber prepreg molding process based on the design of the mold for manufacturing the carbon wheel using the carbon fiber pressure forming method, the carbon wheel molding process using the Taguchi method And to produce prototypes based on the results.

키워드

참고문헌

  1. Choe, J. C., Park, I. M., Yoon, E. P., Nam, T. W., "Disk Wheels of Light Metals for Automobiles", Journal of Korea Foundry Society, Vol. 7, No. 3, pp. 179-183, 1987.
  2. Hong, D. P., Kim, H. S., Y. Hong, Ko, Y. G., Yoo, C. H., "The Vibration Characteristics of Hybrid Shaft by the Layering Method on the Outer Surface of the Carbon Fiber Prepreg", Journal of the Korean Society of Manufacturing Technology Engineers Spring Conference Proceedings, pp. 59-64, 2009.
  3. Kim, M. S., Ko, K. J., Kim, J. H., Yang, C. G., Kim, K. M., "The Study on the Fatigue Life Prediction on Wheels through CAE", Transactions of KSAE, Vol. 12, No. 2, pp. 117-122, 2004.
  4. Kim, S., Kang, H., Yang, S., "Fatigue Life Prediction of Automotive Wheels subjected to Bending Moments Using Flexible body", The Korean Society of Automotive Engineers Spring Conference Proceedings, pp. 1623-1628, 2005.
  5. Lee, D. J., Ko, H. G., Ko, J. M., "The Study on the Development and Verification of Structure Analysis Method Considering Thinning Effect after Press Forming in Steel Wheel Design", The Korean Society of Automotive Engineers Spring Conference Proceedings, pp. 710-715, 2003.
  6. Chung, T. E., Yin, J .J., Lee, D. J., Ko, H. G., Ko, J. M., "Forming Analysis on the 4-spoke Typed Skeleton Steel Wheel Disk", The Korean Society of Automotive Engineers Spring Conference Proceedings, pp. 1329-1334, 2004.
  7. Han, S. R., "Improvement of Insert Molding for Refrigerator Glass Shelves Using Numerical Analysis", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 6, pp. 50-57, 2016. https://doi.org/10.14775/ksmpe.2016.15.6.050
  8. Lee, I. K., Lee, S. Y., Lee, S. K., Ahn, M. S., "Trimless Blank Design for Hot Stamping Process of a Sill Side", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 5, pp. 93-99, 2016. https://doi.org/10.14775/ksmpe.2016.15.5.093
  9. Park, D. H., Kwon, H. H., "Development of Automotive Seat Rail Parts for Improving Shape Fixability of Ultra High Strength Steel of 980MPa", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 5, pp. 137-144, 2016. https://doi.org/10.14775/ksmpe.2016.15.5.137