품질경영학회지 (Journal of Korean Society for Quality Management)

  • 제45권3호
  • /
  • Pages.309-326
  • /
  • 2017
  • /
  • 1229-1889(pISSN)
  • /
  • 2287-9005(eISSN)
한국품질경영학회 (Korean Society for Quality Management)
권호 표지
DOI QR코드

DOI QR Code

국방연구개발사업 제조성숙도 평가결과에 대한 연관도 분석

Association Analysis for MRA Results of Defense R&D

  • Eom, W (Defense Agency for Technology and Quality)
  • 투고 : 2016.07.31
  • 심사 : 2017.09.04
  • 발행 : 2017.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Purpose: The purpose of this study is to propose useful idea and data by association analyzing MRA results of defense research and development. Methods: The collected data through the DTaQ MRA system are analyzed using three association analysis measurements. Results: The results of this study are as follows; some evaluation items are very highly associated according to confidence and lift. The result is also meaningful as contents of evaluation items. The result of this study suggests a direction for improvement of MRA system. Conclusion: Some evaluation items of MRA are meaningfully associated. Therefore, the result can support the improvement of MRA system.

키워드

참고문헌

  1. Ahn, B. C., Song, H. G., Song, G. S., and Yoon, J. C. 2014. "Technology Readiness Evaluation Index for the Maturity of Weapon System." Korean Journal of Business Administration 27(9):1449-1464.
  2. Choi, D., Lee, S. Y., and Kim, Y. R. 2013. "Research on Improvements of an Effective Manufacturing Readiness Assessment (MRA) System for Domestic Defense R&D Project." Journal of the Korean Association of Defense Industry Studies 20(1):141-158.
  3. Chung, I. H., Lee, H. Y., and Park, Y. I. 2012. "Reliability Evaluation of Weapon System using Field Data: Focusing on Case Study of K-series Weapon System." Journal of the Korean Society for Quality Management 40(3):278-285. https://doi.org/10.7469/JKSQM.2012.40.3.278
  4. DAPA. 2012. "A Guide of Manufacturing Readiness Assessment." Defense Acquisition Program Administration, Korea.
  5. DoD. 2007. "Manufacturing Readiness Level Guide." Department of Defense, USA.
  6. DoD. 2013. "Manufacturing Readiness Level Instruction." Department of Defense, USA.
  7. Kim, D. H. Kim, C. Y., and Lee, J. H. 2011. "A Study on the Manufacturing Readiness Assessment for Developmetnt Phase." The 7th Conference on National Defense Technology 1:373-383.
  8. Lim, J. S. Lee, K. J., and Cho, Y. S. 2010. "A study of association rule by considering the frequency." Journal of the Korean Data & Information Science Society 21(60):1061-1069.
  9. Park, Chung Hee. 2014. "A case study on calibration of computational model for a reasonable cost estimation of missile development program (A case of guidance & control system of X missile)." JOURNAL OF DIGITAL CONVERGENCE 12(5):139-148. https://doi.org/10.14400/JDC.2014.12.5.139
  10. Shim, In Bo. 2013. "Introduction of Technology Readiness Assessment." Defense & Technology 411:60-65.
  11. Woo, S., Lee, J. H., and Lim, J. S. 2014. "A Study on the System Readiness Assessment Procedure Development through a case study in Defense R&D Programs." Journal of the Korean Society for Quality Management 42(1):111-127. https://doi.org/10.7469/JKSQM.2014.42.1.111
  12. Yoon, K. S., and Lee, J. C. 2012. "A Case Study on the Reliability Assessment of Stockpile Ammunition." ournal of the Korean Society for Quality Management 40(3):259-269. https://doi.org/10.7469/JKSQM.2012.40.3.259