DOI QR코드

DOI QR Code

Automotive High Side Switch Driver IC for Current Sensing Accuracy Improvement with Reverse Battery Protection

  • Park, Jaehyun (Department of Electrical and Electronics Engineering, Dankook University) ;
  • Park, Shihong (Department of Electrical and Electronics Engineering, Dankook University)
  • Received : 2017.02.02
  • Accepted : 2017.05.21
  • Published : 2017.09.20

Abstract

This paper presents a high-side switch driver IC capable of improving the current sensing accuracy and providing reverse battery protection. Power semiconductor switches used to replace relay switches are encumbered by two disadvantages: they are prone to current sensing errors and they require additional external protection circuits for reverse battery protection. The proposed IC integrates a gate driver and current sensing blocks, thus compensating for these two disadvantages with a single IC. A p-sub-based 90-V $0.13-{\mu}m$ bipolar-CMOS-DMOS (BCD) process is used for the design and fabrication of the proposed IC. The current sensing accuracy (error ${\leq}{\pm}5%$ in the range of 0.1 A-6.5 A) and the reverse battery protection features of the proposed IC were experimentally tested and verified.

Keywords

References

  1. B. Lequesne, "Automotive electrification: The nonhybrid story," IEEE Trans, Transport, Electrific,, Vol. 1, No. 1, pp. 40-53, Jun. 2015. https://doi.org/10.1109/TTE.2015.2426573
  2. A. Patel and M. Ferdowsi, "Current sensing for automotive electronics - A survey," IEEE Trans. Veh. Technol., Vol. 58, No. 8, pp. 4108-4119, Oct. 2009. https://doi.org/10.1109/TVT.2009.2022081
  3. Infineon, "BTS5030-1EJA" Datasheet.
  4. International Rectifier, "IR3311" Datasheet.
  5. STMicroelectronics, "VN7016AJ-E" Datasheet.
  6. V. Choudhary and M. Jacob, "Smart diode and 4-switch buck-boost provide ultra high efficiency, compact solution for 12-V automotive battery rail," Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 2016, PCIM Europe 2016, International Exhibition and Conference for, pp.2019-2026, 2016.
  7. F. Scrimizzi, G. Longo, and G. Gambino "Automotive-grade P-channel power MOSFETs for Static, dynamic and repetitive reverse polarity protection," Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 2016, PCIM Europe 2016, International Exhibition and Conference for, 10-12, pp.1987-1991, 2016
  8. E. Biagi, L. Fanucci, L. D. Piro, M. Schipani, R. Serventi, P. D'Abramo, "Universal output stage with reverse polarity protection for automotive applications," Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM, 2014 International Symposium on, pp. 929-934, 2014.
  9. N. Costantino, R. Serventi, F. Tinfena, P. D'Abramo, P. Chassard, P. Tisserand, S. Saponara, and L. Fanucci, "Design and test of an HV-CMOS intelligent power switch with integrated protection and self-diagnostic for harsh automotive applications," IEEE Trans. Ind. Electron., Vol. 58, No. 7, pp. 2715-2727, Jul. 2011. https://doi.org/10.1109/TIE.2010.2084979
  10. K. Sakamoto, Y. Nunogawa, K. Satonaka, T. Kouda, and S. Horiuchi, "An intelligent power IC with reverse battery protection for fast-switching high side solenoid drive," IEEE Trans. Electron Devices, Vol. 46, No. 8, pp. 1775-1781, Nov. 1999. https://doi.org/10.1109/16.777169
  11. K. Sakamoto, Y. Nunogawa, K. Satonaka, and S. Horiuchi, "A three-terminal intelligent power MOSFET with built-in reverse battery protection for automotive applications," IEEE Trans. Electron Devices, Vol. 46, No. 11, pp. 2228-2234, Nov. 1999. https://doi.org/10.1109/16.796300
  12. Infineon, "Profet + Current Sense" Smart High Side Switches Rev1.1, Application Note.
  13. NXP Semiconductors, "Current Sensing Power MOSFETs" AN10322, Application Note.
  14. Y. Xiao, J. Cao, J.D. Chen, and K. Spring, "Current sensing trench power MOSFET for automotive applications," Applied Power Electronics Conference and Exposition, 2005, APEC 2005. Twentieth Annual IEEE, pp. 766-770, 2005.
  15. I.-Y. Park, Y.-K. Choi, K.-Y. Ko, S.-C. Shim, B.-K. Jun, N.-C. Moon, N.-J. Kim, and K.-D. Yoo, "BCD (Bipolar-CMOS-DMOS) technology trends for power management IC," Power Electronics and ECCE Asia (ICPE & ECCE), 2011 IEEE 8th International Conference on, pp. 318-325, 2011.
  16. I.-Y. Park, Y.-K. Choi, K.-Y. Ko, C.-J. Yoon, B.-K. Jun, M.-Y. Kim, H.-C. Lim, N.-J. Kim, and K.-D. Yoo, "BD180: A New 0.18 ${\mu}m$ BCD (Bipolar-CMOS-DMOS) Technology from 7 V to 60 V," Power Semiconductor Devices and IC's, 2008, ISPSD '08, 20th International Symposium on, pp. 64-67, 2008.
  17. S. Park and T. M. Jahns, "A self-boost charge pump topology for a gate drive high-side power supply," IEEE Trans. Power Electron., Vol. 20, No. 2, pp. 300-307, Mar. 2005.
  18. International Rectifier, "IRF3710ZPbF" Datasheet.
  19. V. Macary, T. Sicard, and R. Petrutiu, "A novel LDMOS structure with high negative voltage capability for reverse battery protection in automotive IC's," Bipolar/BiCMOS Circuits and Technology Meeting, pp. 90-93, 2001.
  20. Infineon, "Improved SENSE Calibration and Benefits Guide" V1.0, Application Note.