DOI QR코드

DOI QR Code

Properties of concrete incorporating granulated blast furnace slag as fine aggregate

  • 투고 : 2017.07.19
  • 심사 : 2017.09.04
  • 발행 : 2017.10.25

초록

The present work investigates about the development of a novel construction material by utilizing Granulated Blast Furnace Slag (GBS), an industrial waste product, as substitution of natural fine aggregates. For this, experimental work has been carried out to determine the influence of GBS on the properties of concrete such as compressive strength (CS), modulus of elasticity, ultrasonic pulse velocity (UPV), chloride penetration, water absorption (WA) volume of voids (VV) and density. Concrete mixes of water/cement (w/c) ratios 0.45 and 0.5, and incorporating 20%, 40% and 60% of GBS as partial replacement of natural fine aggregate (sand) are designed for this study. The results of the experimental investigation depict that CS of concrete mixes increases with the increasing percentages of GBS. Moreover, the decrease in chloride penetration, WA and VV, and improvement in the modulus of elasticity, UPV, density of concrete is reported with the increasing percentage of GBS in concrete.

키워드

참고문헌

  1. Ambily, P.S., Umarani, C., Ravisankar, K., Prem, P.R., Bharatkumar, B.H. and Iyer, N.R. (2015), "Studies on ultra high performance concrete incorporating copper slag as fine aggregate", Constr. Build. Mater., 77, 233-240. https://doi.org/10.1016/j.conbuildmat.2014.12.092
  2. American Concrete Institute (2011), ACI Committee 318: Building Code Requirements for Structural Concrete, Farmington Hills, Michigan, U.S.A.
  3. Ashish, D.K., Singh, B. and Verma, S.K. (2016), "The effect of attack of chloride and sulphate on ground granulated blast furnace slag concrete", Adv. Concrete Constr., 4(2), 101-121.
  4. ASTM C469-02 (2002), Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio, American Society for Testing and Materials, West Conshohocken, U.S.A.
  5. ASTM C642-06 (2006), Standard Test Method for Density, Absorption, and Voids in Hardened Concrete, American Society for Testing and Materials, West Conshohocken, U.S.A.
  6. Babu, J. and Mahendran, N. (2014), "Experimental studies on concrete replacing fine aggregate with blast furnace slags", J. Eng. Trend. Technol., 10(8), 1-3. https://doi.org/10.14445/22315381/IJETT-V10P201
  7. Binici, H., Aksogan, O., Gorur, E.B., Kaplan, H. and Bodur, M.N. (2008), "Performance of ground blast furnace slag and ground basaltic pumice concrete against seawater attack", Constr. Build. Mater., 22(7), 1515-1526. https://doi.org/10.1016/j.conbuildmat.2007.03.024
  8. Binici, H., Aksogan, O., Gorur, E.B., Kaplan, H. and Bodur, M.N. (2009), "Hydro-abrasive erosion of concrete incorporating ground blast-furnace slag and ground basaltic pumice", Constr. Build. Mater., 23(2), 804-811. https://doi.org/10.1016/j.conbuildmat.2008.03.003
  9. Binici, H., Durgun, M.Y., Rizaoglu, T. and Kolucolak, M. (2012), "Investigation of durability properties of concrete pipes incorporating blast furnace slag and ground basaltic pumice as fine aggregates", Sci. Iran., 19(3), 366-372. https://doi.org/10.1016/j.scient.2012.04.007
  10. Chithra, S., Kumar, S.S. and Chinnaraju, K. (2016), "The effect of colloidal nano-silica on workability, mechanical and durability properties of high performance concrete with copper slag as partial fine aggregate", Constr. Build. Mater., 113, 794-804. https://doi.org/10.1016/j.conbuildmat.2016.03.119
  11. Chunlin, L., Kunpeng, Z. and Depeng, C. (2011), "Possibility of concrete prepared with steel slag as fine and coarse aggregates: A preliminary study", Proc. Eng., 24, 412-416. https://doi.org/10.1016/j.proeng.2011.11.2667
  12. Dhir, R.K., Limbachiya, M.C. and Leelawat, T. (1999), "Suitability of recycled aggregate for use in BS 5328 designated mixes", Proceedings of the Institute of Civil Engineering, 134, 257-274.
  13. Dillmann, R. (1998), "Concrete with recycled concrete aggregate", Proceedings of the International Symposium on Sustainable Construction: Use of Recycled Concrete Aggregate, London, U.K., November.
  14. Ding, Y.C., Cheng, T.W., Liu, P.C. and Lee, W.H. (2017), "Study on the treatment of BOF slag to replace fine aggregate in concrete", Constr. Build. Mater., 146, 644-651. https://doi.org/10.1016/j.conbuildmat.2017.04.164
  15. Dos Anjos, M.A.G., Sales, A.T.C. and Andrade, N. (2017), "Blasted copper slag as fine aggregate in Portland cement concrete", J. Environ. Manage., 196, 607-613. https://doi.org/10.1016/j.jenvman.2017.03.032
  16. Farooq, M.A., Sato, Y., Ayano, T. and Niitani, K. (2017), "Experimental and numerical investigation of static and fatigue behavior of mortar with blast furnace slag sand as fine aggregates in air and water", Constr. Build. Mater., 143, 429-443. https://doi.org/10.1016/j.conbuildmat.2017.03.147
  17. Hueste, M.B.D., Chompreda, P., Trejo, D., Cline, D.B. and Keating, P.B. (2004), "Mechanical properties of high-strength concrete for prestressed members", Struct. J., 101(4), 457-465.
  18. IS 10262 (2009), Indian Standard Concrete Mix Proportioning-Guidelines, Bureau of Indian Standards, New Delhi, India.
  19. IS 1331 (1992), Indian Standard Non-Destructive Testing of Concrete-Method of Test: Part 1 Ultrasonic Pulse Velocity, Bureau of Indian Standards, New Delhi, India.
  20. IS 383 (1970), Indian Standard Specification for Coarse and Fine Aggregate from Natural Sources, Bureau of Indian Standards, New Delhi, India.
  21. IS 456 (2000), Indian Standard Plain and Reinforced Concrete Code of Practice, Bureau of Indian Standards, New Delhi, India.
  22. IS 516 (1959), Indian Standard Methods of Tests for Strength Concrete, Bureau of Indian Standards, New Delhi, India.
  23. IS 8112 (1959), Indian Standard Specification 43 Grade Ordinary Portland Cement Specification, Bureau of Indian Standards, New Delhi, India.
  24. Kehagia, F. (2009), "Skid resistance performance of asphalt wearing courses with electric arc furnace slag aggregates", Waste Manage. Res., 27(3), 288-294. https://doi.org/10.1177/0734242X08092025
  25. Kockal, N.U. (2016), "Investigation about the effect of different fine aggregates on physical, mechanical and thermal properties of mortars", Constr. Build. Mater., 124, 816-825. https://doi.org/10.1016/j.conbuildmat.2016.08.008
  26. Lee, B.J., Prabhu, G.G., Lee, B.C. and Kim, Y.Y. (2016), "Eco-friendly porous concrete using bottom ash aggregate for marine ranch application", Waste Manage. Res., 34(3), 214-224. https://doi.org/10.1177/0734242X15620006
  27. Lin, K.L., Wang, K.S., Tzeng, B.Y. and Lin, C.Y. (2003), "Hydraulic activity of cement mixed with slag from vitrified solid waste incinerator fly ash", Waste Manage. Res., 21(6), 567-574. https://doi.org/10.1177/0734242X0302100609
  28. Mellmann, G. (1999), "Processed concrete rubble for the reuse as aggregate", Proceedings of the International Seminar on Exploiting Waste in Concrete, Scotland, U.K., September.
  29. Mithun, B.M. and Narasimhan, M.C. (2016), "Performance of alkali activated slag concrete mixes incorporating copper slag as fine aggregate", J. Clean. Prod., 112, 837-844. https://doi.org/10.1016/j.jclepro.2015.06.026
  30. Mukharjee, B.B. and Barai, S.V. (2015a), "Characteristics of sustainable concrete incorporating recycled coarse aggregates and colloidal nano-silica", Adv. Concrete Constr., 3(3), 187-202. https://doi.org/10.12989/acc.2015.3.3.187
  31. Mukharjee, B.B. and Barai, S.V. (2015b), "Development of construction materials using nano-silica and aggregates recycled from construction and demolition waste", Waste Manage. Res., 33(6), 515-523. https://doi.org/10.1177/0734242X15584840
  32. NBR 6118 (2003), Brazilian Association of Technical Standards: Design of Concrete Structures, Riode Janeiro.
  33. Neville, A.M. (1997), Properties of Concrete, 4th and Final Edition, Pearson Education Limited, Harlow, U.K.
  34. Otsuki, N., Nagataki, S. and Nakashita, K. (1992), "Evaluation of AgNo3 solution spray method for chloride penetration into hardened cementitious matrix materials", ACI Mater. J., 89(6), 587-592.
  35. Pal, S.C., Mukherjee, A. and Pathak, S.R. (2003), "Investigation of hydraulic activity of ground granulated blast furnace slag in concrete", Cement Concrete Res., 33(9), 1481-1486. https://doi.org/10.1016/S0008-8846(03)00062-0
  36. Pang, B., Zhou, Z. and Xu, H. (2015), "Utilization of carbonated and granulated steel slag aggregate in concrete", Constr. Build. Mater., 84, 454-467. https://doi.org/10.1016/j.conbuildmat.2015.03.008
  37. Patra, R.K. and Mukharjee, B.B. (2016), "Fresh and hardened properties of concrete incorporating ground granulated blast furnace slag-a review", Adv. Concrete Constr., 4(4), 283-303. https://doi.org/10.12989/acc.2016.4.4.283
  38. Patra, R.K. and Mukharjee, B.B. (2017), "Influence of incorporation of granulated blast furnace slag as replacement of fine aggregate on properties of concrete", J. Clean. Prod., 165, 468-476. https://doi.org/10.1016/j.jclepro.2017.07.125
  39. Rashad, A.M., Sadek, D.M. and Hassan, H.A. (2016), "An investigation on blast-furnace stag as fine aggregate in alkali-activated slag mortars subjected to elevated temperatures", J. Clean. Prod., 112, 1086-1096. https://doi.org/10.1016/j.jclepro.2015.07.127
  40. Shu, C.Y., Kuo, W.T. and Juang, C.U. (2016), "Analytical model of expansion for electric arc furnace oxidizing slag-containing concrete", Comput. Concrete, 18(5), 937-950. https://doi.org/10.12989/cac.2016.18.5.937
  41. Singh, G. and Siddique, R. (2016), "Strength properties and micro-structural analysis of self-compacting concrete made with iron slag as partial replacement of fine aggregates", Constr. Build. Mater., 127, 144-152. https://doi.org/10.1016/j.conbuildmat.2016.09.154
  42. Singh, G., Das, S., Ahmed, A.A., Saha, S. and Karmakar, S. (2015), "Study of granulated blast furnace slag as fine aggregates in concrete for sustainable infrastructure", Proc.-Soc. Behav. Sci., 195, 2272-2279. https://doi.org/10.1016/j.sbspro.2015.06.316
  43. Sri Ravindrarajah, R. and Tam, C.T. (1985), "Properties of concrete made with crushed concrete as coarse aggregate", Mag. Concrete Res., 37(130), 29-38. https://doi.org/10.1680/macr.1985.37.130.29
  44. Topcu, I.B. and Boga, A.R. (2010), "Effect of boron waste on the properties of mortar and concrete", Waste Manage. Res., 28(7), 626-633. https://doi.org/10.1177/0734242X09345561
  45. Valcuende, M., Benito, F., Parra, C. and Minano, I. (2015), "Shrinkage of self-compacting concrete made with blast furnace slag as fine aggregate", Constr. Build. Mater., 76, 1-9. https://doi.org/10.1016/j.conbuildmat.2014.11.029
  46. Yuksel, I., Bilir, T. and Ozkan, O. (2007), "Durability of concrete incorporating non-ground blast furnace slag and bottom ash as fine aggregate", Build. Environ., 42(7), 2651-2659. https://doi.org/10.1016/j.buildenv.2006.07.003
  47. Zeghichi, L. (2006), "The effect of replacement of naturals aggregates by slag products on the strength of concrete", Asian J. Civil Eng., 7(1), 27-35.

피인용 문헌

  1. Potential valorisation of ferrous slag in the treatment of water and wastewater: A review vol.8, pp.1, 2017, https://doi.org/10.12989/aer.2019.8.1.055