DOI QR코드

DOI QR Code

Test Platform Development of Vessel's Power Management System Using Hardware-in-the-Loop Simulation Technique

  • Lee, Sang-Jung (Dept. of Electrical Engineering, Ulsan National Institute of Science and Technology (UNIST)) ;
  • Kwak, Sang-Kyu (Dept. of Electrical Engineering, Ulsan National Institute of Science and Technology (UNIST)) ;
  • Kim, Sang-Hyun (Outfitting System Research Department, Hyundai Heavy Industries) ;
  • Jeon, Hyung-Jun (Outfitting System Research Department, Hyundai Heavy Industries) ;
  • Jung, Jee-Hoon (School of Electrical and Computer Engineering, Ulsan National Institute of Science and Technology (UNIST))
  • Received : 2017.05.15
  • Accepted : 2017.08.16
  • Published : 2017.11.01

Abstract

A PMS (Power Management System) controls vessel's power systems to improve the system efficiency and to protect a blackout condition. The PMS should be developed with considering the type and the capacity of the vessel's power system. It is necessary to test the PMS functions developed for vessel's safe operations under various sailing situations. Therefore, the function tests in cooperation with practical power systems are required in the PMS development. In this paper, a hardware-in-the-loop (HIL) simulator is developed for the purposes of the PMS function tests. The HIL simulator can be more cost-effective, more time-saved, easier to reproduce, and safer beyond the normal operating range than conventional off-line simulators, especially at early stages in development processes or during fault tests. Vessel's power system model is developed by using a MATLAB/SIMULINK software and by communicating between an OPAL-RT's OP5600 simulator. The PMS uses a Modbus communication protocol implemented using LabVIEW software. Representative tests of the PMS functions are performed to verify the validity of the proposed HIL-based test platform.

Keywords

References

  1. G-D. Alejandro, "Mobile Applications, Cloud and Bigdata on Ships and Shore Stations for Increased Safety on Marine Traffic; a Smart Ship Project," in Proc. 2015 IEEE International Conference on Industrial Technology (ICIT), pp. 1532-1537, 2015.
  2. T. M. Masaud, L. Keun and P. K. Sen, "An overview of energy storage technologies in electric power systems: What is the future?," in Proc. North Amer. Power Symp, pp. 1-6, 2010.
  3. W. Jing, S. Yulun, L. Wendong, G. Ji and A. Monti, "Development of a Universal Platform for Hardware In-the-Loop Testing of Microgrids," IEEE Trans. Industrial Informatics, vol. 10, pp. 2154-2165, Aug. 2014. https://doi.org/10.1109/TII.2014.2349271
  4. S. Conti, R. Nicolosi, S. A. Rizzo and H. H. Zeineldin, "Optimal dispatching of distributed generators and storage systems for MV Islanded microgrids," IEEE Trans. Power Delivery, vol. 27, pp. 1243-1251, Jul. 2012. https://doi.org/10.1109/TPWRD.2012.2194514
  5. S. Chakraborty, M. D. Weiss and M. Godoy Simoes, "Distributed intelligent energy management system for a single-phase high-frequency AC microgrid," IEEE Trans. Industrial Electronics, vol. 54, pp. 97-109, Feb. 2007. https://doi.org/10.1109/TIE.2006.888766
  6. E. Barklund, N. Pogaku, M. Prodanovic, C. H. Aramuro and T. C. Green, "Energy management in autonomous microgrid using stability-constrained droop control of inverters," IEEE Trans. Power Electronics, vol. 23, pp. 2346-2352, Sep. 2008. https://doi.org/10.1109/TPEL.2008.2001910
  7. J. Y. Kim, Jin-Hong Jeon, Seul-Ki Kim and Changhee Cho, "Cooperative control strategy of energy storage system and microsources for stabilizing the microgrid during Islanded operation," IEEE Trans. Power Electronics, vol. 25, pp. 3037-3048, Dec. 2010. https://doi.org/10.1109/TPEL.2010.2073488
  8. A. Hasanzadeh, C. S. Edrington, N. Stroupe, and T. Bevis, "Real time emulation of a high-speed microturbine permanent-magnet synchronous generator using multiplatform hardware-in-the-loop realization," IEEE Trans. Industrial Electronics, vol. 61, pp. 3109-3118, Jun. 2014. https://doi.org/10.1109/TIE.2013.2279128
  9. Bouscayrol A, Lhomme W, Delarue P, Lemaire-Semail B and Aksas S, "Hardware-in-the-loop simulation of electric vehicle traction systems using Energetic Macroscopic Representation," in Proc. IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics, pp. 5319 - 5324, 2006.
  10. G. F. Lauss, M. O. Faruque, K. Schoder, C. Dufour, A. Viehweider and J. Langston, "Characteristics and Design of Power Hardware-in-the Loop Simulations for Electrical Power Systems," IEEE Trans. Industrial Electronics, vol. 63, pp. 406-417, Jan. 2016. https://doi.org/10.1109/TIE.2015.2464308
  11. W. Ren, M. Steurer and T. L. Baldwin, "Improve the stability and the accuracy of power hardware-in-theloop simulation by selecting appropriate interface algorithms," IEEE Trans. Industry Applications, vol. 44, pp. 1286- 1294, July. 2008. https://doi.org/10.1109/TIA.2008.926240
  12. H. Li, M. Steurer, K. L. Shi, S. Woodruff and D. Zhang, "Development of a unified design, test, and research platform for wind energy systems based on hardware-in-the-loop real-time simulation," IEEE Trans. Industrial Electronics, vol. 53, no. 4, pp. 1144-1151, Jun. 2006. https://doi.org/10.1109/TIE.2006.878319
  13. Krause P.C, "Analysis of Electric Machinery," 3nd ed., New York, NY: McGraw-Hill, 1986, pp. 191-259.
  14. L.N. Hanytt, F.P. de Mello, G.H. Tylinski and W.H. Becker, "Validation of Nuclear Plant Auxiliary Power Supply by Test," IEEE Trans. Power Apparatus and Systems, Vol. PAS-101, pp. 3068-3074, Sep. 1982. https://doi.org/10.1109/TPAS.1982.317551
  15. "IEEE Recommended Practice for Excitation System Models for Power System Stability Studies," IEEE Power and Energy Society, Vol. 421, May. 2016.
  16. Bimal K. Bose, "Modern Power Electronics and AC Drives," Upper Saddle River, NJ: Prentice-Hall, pp. 29-97, 2002.
  17. R. O. Salcedo, J. K. Nowoein, C. L. Smith and R. P. Rekha, "Development of a real-time hardware in the loop power systems simulation platform to evaluate commercial microgrid controllers," Lincoln Laboratory, MIT, Boston, MA, Tech. Rep. TR-1203, Feb. 2016.