Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Application of Machine Simulation and Angle Milling Head of a 6-Axis Parallel Kinematic Machine

6축 병렬기구 공작기계의 머신 시뮬레이션과 앵글밀링헤드 적용에 관한 연구

  • Lee, In-Su (Korea Aerospace LTD.) ;
  • Kim, Hae-Ji (Department of Automotive Engineering, Gyeongnam National University of Science and Technology, Automotive Engineering) ;
  • Kim, Nam-Kyung (Department of Automotive Engineering, Gyeongnam National University of Science and Technology, Automotive Engineering)
  • 이인수 (한국항공우주산업(주)) ;
  • 김해지 (경남과학기술대학교 자동차공학과) ;
  • 김남경 (경남과학기술대학교 자동차공학과)
  • Received : 2017.08.17
  • Accepted : 2017.09.07
  • Published : 2017.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

This study examines the implementation of a kinematic machining tool to evaluate the interference and collision phenomenon of 5-axis machining of wing ribs from airplanes, particularly for a large-size model airplane. We develop a machine simulation model of a parallel kinematic machining tool that can operate in a virtual space, which is equivalent to the authentic conditions in the field. The investigation of the simulation function elements indicates the necessity to generate the 6-axis machining, which attaches an angle head to the main axis of the machine. Using an NC program for the wing ribs, we attempt to verify the correspondence and conformity between the machine simulation model and the actual equipment.

Keywords

References

  1. Lee, M. K., Kim, T. S., and Lee, W. C., "Study on Parallel-Typed Robot and Machining Tool," Journal of the Korean Society of Precision Engineering, Vol. 18, No. 7, pp. 9-18, 2001.
  2. Shin, H., Ryou, H. S., and Jung, Y. G., "The Evaluation of Machining Accuracy and the Machine Simulation for Parallel Kinematic Machine Tool(PKMT)," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 8, No. 4, pp. 41-47, 2009.
  3. Kim, J. S, and Kim, Y. J., "Cutting Performance of a Developed Small-angle Spindle Tool," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 2, pp. 111-117, 2016. https://doi.org/10.14775/ksmpe.2016.15.2.111
  4. Kim, H. J., Lee, I. S., and Kim, N. K., "Interference Check and NC Data Optimization through Machine Simulation in 5 Axis Machining of a Vehicle Parts of Aluminum Alloy," Journal of the Korean Society for Precision Engineering, Vol. 21, No. 12, pp. 52-59, 2004.
  5. Kim, H. J., Jang, J. H., and Kim, N. K., "A Study on Interference Phenomenon of a Machine Tool When 5 Axis Working with Virtual Machine Tool," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 4, No. 2, pp. 16-23, 2005.
  6. Son, H. J., Cho, Y. T. and Jung, Y. G., "The Development of Module for 5-axis Drilling of a Closed Type Impeller," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 1, pp. 1-7, 2014. https://doi.org/10.14775/ksmpe.2014.13.1.001
  7. Son, H. J., Lim, E. S. and Jung, Y. G., "The Improvement of Surface Roughness of Marine Propeller by Continuous Control of Cutter Posture in 5-Axis Machining,"Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 2, pp. 27-33, 2012.
  8. Jung, H. C., Hwang, J. D. and Jung, Y. G., "Development of CAM Automation Module(E-ICAM) for 5-axis Machining of Impeller : A Study on Configuration of Module,"Journal of the Korean Society of Manufacturing Process Engineers, Vol. 10, No. 4, pp. 109-114, 2011.
  9. Suk, H. S., Seo, Y. H., Lee, S. M., Chung, G. S., and Kim, D. Y., "Modeling and implementation of internet-based virtual machine tools," The International Journal of Advanced Manufacturing Technology, Vol. 20, pp. 1-7, 2003.
  10. Hwang, J. D., Kim, J. H., Cho, Y. T., Jung, Y. G., and Ko, H. J., "Development of the Optimized Angle Head for Internal Shape Machining Using Five-Axis Machine Tool," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 1, pp. 123-129, 2015. https://doi.org/10.14775/ksmpe.2015.14.1.123
  11. Lee, I. S., and Kim, H. J., "A Study of High Speed Machining Distortion Characteristics of Aluminum Lithium Alloys Wing Rib," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 6, pp. 111-118, 2014. https://doi.org/10.14775/ksmpe.2014.13.6.111