한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제16권5호
  • /
  • Pages.113-118
  • /
  • 2017
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

사출금형 설계에서 강건성을 고려한 게이트 위치의 결정

Determination of Gate Position Considering Robustness in Injection Mold Design

  • 박종천 (금오공과대학교 기계공학과) ;
  • 김경모 (금오공과대학교 산업공학부)
  • 투고 : 2017.07.12
  • 심사 : 2017.08.23
  • 발행 : 2017.10.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, we propose a design procedure for determining the gate position robust to changes and inherent fluctuations in the process conditions during injection molding. To evaluate the robustness of the gate position, the signal-to-noise ratio is used, and noise conditions are implemented using orthogonal arrays, where the process variables are considered as noise factors and possible process fluctuations are set as the levels of the noise factors. To show the usefulness of the proposed robust design procedure, we apply it to a computer CPU baseplate. As a result, it is shown that a robust gate position can be determined that reduces the average warpage deflection by 2.4% and 1.7%, and the variance by 3.4% and 5.1%, compared to the two initial gate positions.

키워드

참고문헌

  1. Zhai, M. et al., "Automated Selection of Gate Location for Plastic Injection Molding Processing," Polymer-Plastics Technology and Engineering, Vol. 44, pp. 229-242, 2005. https://doi.org/10.1081/PTE-200048523
  2. Lee, J. and Kim, J., "Micro Genetic Algorithm Based Optimal Gate Positioning in Injection Molding Design," Journal of Mechanical Science and Technology, Vol. 21, pp. 789-798, 2007. https://doi.org/10.1007/BF02916357
  3. Zhai, M. and Xie, Y., "A Study of Gate Location Optimization of Plastic Injection Molding Using Sequential Linear Programming," Int'l J. of Advanced Manufacturing Technology, Vol. 49, No. 1, pp. 97-103, 2010. https://doi.org/10.1007/s00170-009-2376-1
  4. Cho, S. B. et al., "Determination of Valve Gate Open Timing for Minimizing Injection Pressure of an Automotive Instrument Panel," Transactions of KSAE, Vol. 20, No. 4, pp. 46-51, 2012.
  5. Yamanoi, M. et al., "Application of Birefringence CAE in Mould Design of Optic Lens Injection Molding Process," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 3, pp. 1-6, 2012.
  6. Park, J. C. et al., "Optimization of Gate Location for Melt Flow Balancing in Injection Mold Cavity By Using Recursive Design Area Reduction Method," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 12, No. 4, pp. 114-122, 2013.
  7. Wang, J., Simacek, P., Advani, S. G., "Use of Centroidal Voronoi Diagram to Find Optimal Gate Locations to Minimize Mold Filling Time in Resin Transfer Molding," Composites. Part A, Applied Science and Manufacturing, Vol. 87, pp. 243-255, 2016. https://doi.org/10.1016/j.compositesa.2016.04.026
  8. Steinbichler, G., "Trends in Process Optimization," Kunststoffe German Plastics, Vol. 82, No. 10, pp. 13-17, 1992.
  9. Lee, B. H. and Kim, B. H., "Optimization of Part Wall Thicknesses to Reduce Warpage of Injection-Molded Parts Based on The Modified Complex Method," Polymer-plastics technology and engineering, Vol. 34, No. 5, pp. 793-811, 1995. https://doi.org/10.1080/03602559508009600
  10. Fowlkes, W. Y. and Creveling, C. M., Engineering Methods for Robust Product Design, Addison-Wesley Publishing Company, New York, pp. 29-92, pp. 125-145, 1995.
  11. Park, J. C. et al., "Minimization of Warpage in Injection-Molded Parts by Optimal Design of U-Type Ribs," Journal of the Korean Society for Precision Engineering, Vol. 7, No. 1, pp. 53-61, 2008.
  12. Kota, S. and Chiou, S. J., "Use of Orthogonal Arrays in Mechanical Synthesis," Mechanism and Machine Theory, Vol. 28, No. 6, pp. 777-794, 1993. https://doi.org/10.1016/0094-114X(93)90021-M
  13. ED&C, Autodesk Simulation Moldflow Insight: The 6th edition of ASMI Korean Manual, ED&C Inc., 2012.

피인용 문헌

  1. Metal Injection Molding Analysis for Developing Embroidering Machine Rotary Hooks vol.17, pp.4, 2018, https://doi.org/10.14775/ksmpe.2018.17.4.160