Journal of Korean Society of Steel Construction (한국강구조학회 논문집)

Korean Society of Steel Construction (한국강구조학회)
권호 표지
DOI QR코드

DOI QR Code

Structural Performance Evaluation for Composite Beam Member of Hybrid Modules Frame with Steel-Precast Concrete

강-PC 복합모듈러 골조의 합성보에 대한 구조성능 평가

  • Received : 2017.06.26
  • Accepted : 2017.08.16
  • Published : 2017.10.27
Download PDF
⟨ Previous Next ⟩

Abstract

This study was performed in order to develop of the new modular construction system. For the modular construction method that is currently applied in the country, it is very expensive in terms of material costs and fire resistance because it uses only the steel C-type beam. In order to overcome this, and the practical application of new steel-PC hybrid module construction system. Improvement and development of the cross-section of the structural beam member in order to be carried out first. An experiment was carried out by making three specimens. Experiment result, the composite beam was dominated by the horizontal shear failure. It was evaluated through a nonlinear analysis and experimental & theoretical for the structural performance the composite beam member.

본 연구는 새로운 모듈러 시스템을 개발하기 위한 목적으로 수행하였다. 현재 국내에서 적용되고 있는 모듈러 시스템은 C형 강재보만을 사용하기 때문에 재료비와 내화 측면에서 매우 고가이다. 이를 극복하기 위하여 새로운 강-PC형의 복합모듈러 시스템을 개발하고자 하였다. 우선, 보 단면 형상을 개선하여 개발하기 위한 연구를 진행하였다. 3개의 실험체를 제작하여 휨성능 평가를 위한 실험을 수행하였다. 실험결과, 합성보는 수평전단 파괴에 의해 지배되는 것으로 나타났다. 또한, 비선형 유한요소해석을 수행하여 실험과 이론식과 비교를 통해 구조적 성능을 평가하였다.

Keywords

References

  1. Rogan, A.L., Lawson, R.M., Bates-Brkljac, N. (2000) Value and Benefits Assessment of Modular Construction. The Steel Construction Institute, London.
  2. Tomas, U., Ganiron, J.R., and Mohammed, A. (2014) Prefabricated Technology in a Modular House, International Journal of Advanced Science and Technology, Vol.73, pp.51-74. https://doi.org/10.14257/ijast.2014.73.04
  3. Lawson, R.M., Ogden, R.G., and Bergin, R., (2012) Application of Modular Construction in High-rise Buildings. J Archit Eng ASCE, Vol.18, No.2, pp.148-154. https://doi.org/10.1061/(ASCE)AE.1943-5568.0000057
  4. Lawson, R.M. and Richards, J. (2010) Modular Design for High-rise Buildings, Proc Inst Civ Eng Struct Build, Vol.163, No.SB3, pp.151-164. https://doi.org/10.1680/stbu.2010.163.3.151
  5. Annan, C.D., Youssef, M.A., and Naggar, M.H. (2009) Experimental Evaluation of the Seismic Performance of Modular Steel-braced Frames, Eng Struct 2009, Vol.31, pp.1435-1446.
  6. 이상섭, 배규웅, 박금성(2016) 연결 강판 형상에 따른 모듈러 유닛 간 접합부의 거동 비교, 한국강구조학회논문집, 한국강구조학회, 제28권, 제6호, pp.467-476. Lee, S.S., Bae, K.W., and Park, K.S. (2016), Comparison of Behavior of Connections between Modular Units according to Shape of Connector Plates, Journal of Korean Society of Steel Construction, KSSC, Vol.28, No.6, pp.467- 476 (in Korean).
  7. 이상섭, 박금성, 홍성엽, 배규웅(2015), 모듈러 골조의 각 형강관 기둥과 C형강 보 접합부의 거동 평가, 한국강구조 학회논문집, 한국강구조학회, 제27권, 제5호, pp.471-481. Lee, S.S., Park, K.S., Hong, S.Y., and Bae, K.W. (2015) Comparison of Behavior of Connections between Modular Units According to Shape of Connector Plates, Journal of Korean Society of Steel Construction, KSSC, Vol.27, No.5, pp.471-481 (in Korean).
  8. 이두용, 조봉호, 김태형, 하태휴(2016), 스트랩 브레이스를 갖는 내력벽식 모듈러건축 스틸스터드 벽체의 반복하중에 대한 거동 연구, 한국강구조학회논문집, 한국강구조학회, 제28권, 제6호, pp.415-425. Lee, D.Y., Cho, B.H., Kim, T.H., and Ha, T.H. (2016) Experimental Study on the Cyclic Behavior of Modular Building with Strap Braced Load Bearing Steel Stud Walls, Journal of Korean Society of Steel Construction, KSSC, Vol.28, No.6, pp.415-425 (in Korean).
  9. 박금성, 배규웅, 곽명근, 김형도(2015), 강-PC 복합모듈 합성보의 해석적 평가, 한국전산구조공학회논문집, 한국전산구조공학회, 제28권, 제1호, pp.1-2. Park, K.S., Bae, K.W., Kwak, M.K., and Kim, H.D., (2015), Analytical Evaluation of the Composite Beam for Steel- PC Hybrid Module, Journal of the Computational Structural Engineering Institute of Korea, COSEIK, Vol.28, No.1, pp.1-2. (in Korean). https://doi.org/10.7734/COSEIK.2015.28.1.1
  10. ACI 318-11, Farmington Hills, Michigan, 2011.
  11. Lee, J. and Fenves, G.L. (1998) Plastic-damage Model for Cyclic Loading of Concrete Structures, J Eng Mech ASCE 1998, Vol.124, No.8, pp.892-900. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:8(892)
  12. ABAQUS (2010) ABAQUS analysis user's manual version 6.9-2, Dassault Systemes Simulia orp, Providence, RI, USA.
  13. Saenz, L.P. (1964) Discussion of 'Equation for the stress- strain curve of concrete' by P. Desayi, and S. Krishnan. ACI J, Vol.61, pp.1229-1235.
  14. Hsu, T.T.C. and Mo, Y.-L. (2010) Unified Theory of Concrete Structures. 2nd ed. John Wiley & Sons, Inc.
  15. 대한건축학회(2016), 건축구조설계기준 및 해설(KBC 2016), 기문당 The Architectural Institute of Korea (2016), Korean Building Code and Commentary(KBC2016), Kimoondang (in Korean).