DOI QR코드

DOI QR Code

Effects of numerical modeling simplification on seismic design of buildings

  • 투고 : 2018.07.04
  • 심사 : 2018.10.20
  • 발행 : 2018.12.25

초록

The recent seismic events have led to concerns on safety and vulnerability of Reinforced Concrete Moment Resisting Frame "RC-MRF" buildings. The seismic design demands are greatly dependent on the computational tools, the inherent assumptions and approximations introduced in the modeling process. Thus, it is essential to assess the relative importance of implementing different modeling approaches and investigate the computed response sensitivity to the corresponding modeling assumptions. Many parameters and assumptions are to be justified for generation effective and accurate structural models of RC-MRF buildings to simulate the lateral response and evaluate seismic design demands. So, the present study aims to develop reliable finite element model through many refinements in modeling the various structural components. The effect of finite element modeling assumptions, analysis methods and code provisions on seismic response demands for the structural design of RC-MRF buildings are investigated. where, a series of three-dimensional finite element models were created to study various approaches to quantitatively improve the accuracy of FE models of symmetric buildings located in active seismic zones. It is shown from results of the comparative analyses that the use of a calibrated frame model which was made up of line elements featuring rigid offsets manages to provide estimates that match best with estimates obtained from a much more rigorous modeling approach involving the use of shell elements.

키워드

참고문헌

  1. American Concrete Institute (2014), Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary (ACI 318R-14), Farmington Hills, Michigan, U.S.A.
  2. American Society of Civil Engineers (2006), Seismic Rehabilitation of Existing Buildings, ASCE/SEI 41-06, Reston, Virginia, U.S.A.
  3. American Society of Civil Engineers (2010), Minimum Design Loads for Buildings and Other Structures, ASCE/SEI Standard 7-10, American Society of Civil Engineers, Reston, Virginia, U.S.A.
  4. American Society of Civil Engineers (2014), ASCE Standard ASCE/SEI 41-13: Seismic Evaluation and Retrofit of Existing Buildings, Reston, Virginia, U.S.A.
  5. Applied Technology Council (2009), Guidelines for Seismic Performance Assessment of Buildings, ATC 58, 50% Draft Report, Redwood City, California, U.S.A.
  6. Building Seismic Safety Council (2003), NEHRP Recommended Provisions for the Development of Seismic Regulations for New Buildings, FEMA 450, Washington, U.S.A.
  7. Computers and Structures Inc. (2015), ETABS: Integrated Software for Structural Analysis and Design, Computers and Structures Inc., Berkeley, California, U.S.A.
  8. ECP 201. Egyptian Code of Practice for Loads on Buildings and Bridges (2003), Ministry of Housing, Utilities and Urban Communities of the ARE, Housing and Building Research Center, Egypt.
  9. ECP 203. Egyptian Code of Practice for Design of Reinforced Concrete Structures (2007), Ministry of Housing, Utilities and Urban Communities of the ARE, Housing and Building Research Center, Egypt.
  10. Federal Emergency Management Agency (2000), Pre-standard and Commentary for the Seismic Rehabilitation of Buildings, FEMA 356 Report, American Society of Civil Engineers for the Federal Emergency Management Agency, Washington, U.S.A.
  11. International Congress of Building Officials (1997), Uniform Building Code, International Congress of Building Officials (ICBO), Whittier, California, U.S.A.
  12. Pacific Earthquake Engineering Research Center, Applied Technology Council (2010), Modeling and Acceptance Criteria for Seismic Design and Analysis of Tall Buildings, PEER/ATC 72-1 Report, Redwood, CA.
  13. Pacific Earthquake Engineering Research Center (2010), Seismic Design Guidelines for Tall Buildings, University of California at Berkeley, Berkeley, CA.
  14. Abdel Raheem, S.E. (2013), "Evaluation of Egyptian code provisions for seismic design of moment resisting frames multi-story buildings", Int. J. Adv. Struct. Eng., 5(20), 1-18. https://doi.org/10.1186/2008-6695-5-1
  15. Abdel Raheem, S.E., Abdel Zaher, A.K. and Taha, A.M.A. (2018a), "Finite element modeling assumptions impact on seismic response demands of MRF-buildings", Earthq. Eng. Eng. Vibr., 7(4), 821-834.
  16. Abdel Raheem, S.E., Ahmed, M.M. and Alazrak, T.M. (2015), "Soil-structure interaction effects on seismic response of multi-story buildings on raft foundation", Int. J. Adv. Struct. Eng., 7(1), 11-30. https://doi.org/10.1007/s40091-014-0078-x
  17. Abdel Raheem, S.E., Fooly, M.Y.M., Abdel Shafy, A.G.A., Taha, A.M., Abbas, Y.A. and Abdel Latif, M.M.S. (2018b), "Numerical simulation of potential seismic pounding among adjacent buildings in series", Bullet. Earthq. Eng.
  18. Abdel Raheem, S.E., Momen, M.A., Mohamed, M.A., Abdel Shafy, A.G. (2018), "Seismic performance of L-shaped multi-storey buildings with moment-resisting frames", Proceedings of the Institution of Civil Engineers-Structures and Buildings, 171(5), 395-408. https://doi.org/10.1680/jstbu.16.00122
  19. Avramidis, I., Athanatopoulou, A., Morfidis, K., Sextos, A. and Giaralis, A. (2016), "Eurocode-compliant seismic analysis and design of R/C buildings. Chapter 2: Design of R/C buildings to EC8-1: A critical overview", Geotech. Geol. Earthq. Eng., 38.
  20. Bertero, V.V., Anderson, J.C., Krawinkler, H., Miranda, E. and the CURE and Kajima Research Teams (1991), "Design guidelines for ductility and drift limits: Review of state-of-the-art in ductility and driftbased earthquake-resistant design of buildings", University of California, Berkeley, Report No. UCB/EERC 91/15.
  21. Boroschek, R.L. and Mahin, S.A. (1991), "Investigation of the seismic response of a lightly-damped torsionally-coupled building", A Report to the National Science Foundation UCB/EERC-91/18, Earthquake Engineering Research Center, University of California, Berkeley, U.S.A.
  22. Celebi, E., Goktepe F. and Karahan N. (2012), "Non-linear finite element analysis for prediction of seismic response of buildings considering soil-structure interaction", Nat. Haz. Earth Syst. Sci., 12, 3495-3505. https://doi.org/10.5194/nhess-12-3495-2012
  23. Celebi, M. (2003), Seismic Instrumentation of Buildings, Open-File Report 00-157, United States Geological Survey.
  24. Chan, T.H.T. and Chan, J.H.F. (1999), "The use of eccentric beam elements in the analysis of slab-on-girder bridges", Struct. Eng. Mech., 8(1), 85-102. https://doi.org/10.12989/sem.1999.8.1.085
  25. Dymiotis-Wellington, C. and Vlachaki, C. (2004), "Serviceability limit state criteria for the seismic assessment of RC buildings", Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, Canada, August.
  26. ElAssaly, M. (2013), "Towards seismic vulnerability assessment of the building stock in Egypt", Arab. J. Sci. Eng., 38(11), 2953-2969. https://doi.org/10.1007/s13369-012-0467-z
  27. Elnashap, A.S. and McClure, D.C. (1996), "Effect of modeling assumptions and input motion characteristics on seismic design parameters of RC bridge piers", Earthq. Eng. Struct. Dyn., 25, 435-453. https://doi.org/10.1002/(SICI)1096-9845(199605)25:5<435::AID-EQE562>3.0.CO;2-P
  28. Elwood, K.J., Matamoros, A.B., Wallace, J.W., Lehman, D.E., Heintz, J.A., Mitchell, A.D., Moore, M.A., Valley, M.T., Lowes, L.N., Comartin, C.D. and Moehle, J.P. (2007), "Update to ASCE/SEI 41 concrete provisions", Earthq. Spectr., 23(3), 493-523. https://doi.org/10.1193/1.2757714
  29. Krawinkler, H. (2000), The State-of-the-Art Report on System Performance of Moment Resisting Steel Frames Subjected to Earthquake Ground Shaking, Federal Emergency Management Agency, FEMA 355c, Washington, U.S.A.
  30. Kwon, J. and Ghannoum, W.M. (2016), "Assessment of international standard provisions on stiffness of reinforced concrete moment frame and shear wall buildings", Eng. Struct., 128, 149-160. https://doi.org/10.1016/j.engstruct.2016.09.025
  31. Le-Trung, K., Lee, K., Lee, J. and Lee, D.H. (2010), "Seismic demand evaluation of steel MRF buildings with simple and detailed connection models", Int. J. Steel Struct., 10(1), 15-34. https://doi.org/10.1007/BF03249509
  32. Lee, D.G., Ahn, S.K. and Kim, D.K. (2003), "An efficient model for seismic analysis of building structures with the effect of floor slabs", Proceedings of the 7th Pacific Conference on Earthquake Engineering, PCEE, University of Canterbury, Christchurch, New Zealand, February.
  33. Liang, Y., Li, D., Song, G. and Zhan, C. (2017), "Damage detection of shear buildings through structural mass-stiffness distribution", Smart Struct. Syst., 19(1), 11-20. https://doi.org/10.12989/sss.2017.19.1.011
  34. Lima, C., Martinelli, E., Macorini, L. and Izzuddin, B.A. (2017), "Modelling beam-to-column joints in seismic analysis of RC frames", Earthq. Struct., 12(1), 119-133. https://doi.org/10.12989/eas.2017.12.1.119
  35. Liu, H., Yang, Z. and Gaulke, M. (2004), "Seismic response of an office building: Comparison study by FEA modeling and recorded data analysis from different earthquake events", Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, Canada, August.
  36. Mazzotta, V., Brunesi, E. and Nascimbene, R. (2017), "Numerical modeling and seismic analysis of tall steel buildings with braced frame systems", Period. Polytech., Civil Engineering, Paper 9469.
  37. Mehanny, S.S.F., Soliman, A.M. and Bakhoum, M.M. (2012), "Strength & drift seismic code requirements for mid-rise RC frame buildings", Proceedings of the Global Thinking in Structural Engineering: Recent Achievements IABSE Conference, Sharm El Sheikh, Egypt, May.
  38. Shin, M., Kang, T.H.K. and Grossman, J.S. (2010), "Practical modeling of high-rise dual systems with reinforced concrete slab-column frames", Struct. Des. Tall Spec. Build., 19(7), 728-749.
  39. Snaebjornsson, J., Gardarsdottir, G. and Sigbjornsson, R. (1992), "A study of earthquake induced structural response: Measurements and prediction in earthquake engineering", Proceedings of the 10th World Conference, Spain.
  40. Soliman, A.M., Mehanny, S.S.F. and Bakhoum, M.M. (2012), "Effect of FEM modeling assumptions and code provisions on seismic analysis of RC buildings", Proceedings of the Global Thinking in Structural Engineering: Recent Achievements IABSE Conference, Sharm El Sheikh, Egypt, May.
  41. Sousa, R., Eroglu, T., Kazantzidou, D., Kohrangi, M., Sousa, L., Nascimbene, R. and Pinho, R. (2012), "Effect of different modelling assumptions on the seismic response of RC structures", Proceedings of the 15th World Conference on Earthquake Engineering, Lisbon, Portugal, September.
  42. Uang, C.M., Yu, Q.S., Sadre, A., Bonowitz, D., Youssef, N. and Vinkler, J. (1997), "Seismic response of an instrumented 13-story steel frame building damaged in the 1994 Northridge earthquake", Earthq. Spectr., 13(1), 131-149. https://doi.org/10.1193/1.1585935
  43. Walker, S., Yeargin, C., Lehman, D. and Stanton, J. (2002), "Influence of joint shear stress demand and displacement history on the seismic performance of beam-column joints", Proceedings of the 3rd USJapan Workshop on Performance-Based Earthquake Engineering Methodology for Reinforced Concrete Building Structures, Seattle, U.S.A., August.
  44. Wallace, J.W. (2007), "Modeling issues for tall reinforced concrete core wall buildings", Struct. Des. Tall Spec. Build., 16(5), 615-632. https://doi.org/10.1002/tal.440
  45. Willford, M., Whittaker, A. and Klemencic, R. (2008), Recommendations for the Seismic Design of High-Rise Buildings, Council on Tall Buildings and Urban Habitat, Illinois Institute of Technology, Chicago, IL, U.S.A.
  46. Zendaoui, A., Kadid, A. and Yahiaoui, D. (2016), "Comparison of different numerical models of RC elements for predicting the seismic performance of structures", Int. J. Concrete Struct. Mater., 10(4), 461-478. https://doi.org/10.1007/s40069-016-0170-7
  47. Zeris, C., Vamvatsikos, D., Giannitsas, P. and Alexandropoulos, K. (2007), "Impact of FE modeling in the seismic performance prediction of existing RC buildings", Proceedings of the ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Rethimno, Greece, June.