한국산학기술학회논문지 (Journal of the Korea Academia-Industrial cooperation Society)

  • 제19권11호
  • /
  • Pages.278-286
  • /
  • 2018
  • /
  • 1975-4701(pISSN)
  • /
  • 2288-4688(eISSN)
한국산학기술학회 (The Korea Academia-Industrial cooperation Society)
권호 표지
DOI QR코드

DOI QR Code

국가기술자격제도의 혁신이 기업의 고용결정에 미치는 영향에 관한 연구: 과정평가형 자격을 중심으로

A Study on the Effects of National Technical Qualification System Innovation on Companies' Decision on Employment: Focused on Course-base Qualification

  • 장석근 (한국산업인력공단) ;
  • 봉강호 (건국대학교 기술경영학과) ;
  • 박재민 (건국대학교 기술경영학과)
  • Jang, Seok-Keun (Human Resources Development Service of Korea) ;
  • Bong, Kang Ho (Department of Management of Technology, Konkuk University) ;
  • Park, Jaemin (Department of Management of Technology, Konkuk University)
  • 투고 : 2018.08.16
  • 심사 : 2018.11.02
  • 발행 : 2018.11.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

기존 검정형 자격제도가 산업의 숙련수요를 충분히 반영하지 못하여 노동시장에서 효용성이 낮게 나타나고 있다는 우려가 제기됨에 따라 최근 검정형 자격을 보완 차별화한 혁신형 국가기술자격제도로써 과정평가형 자격제도가 시행되고 있다. 본 연구에서는 과정평가형 자격취득자를 채용한 기업들을 대상으로 한 조사자료를 분석하여 국가기술자격제도의 혁신이 기업의 고용결정에 어떠한 영향을 미치는 지 살펴보고자 하였다. 분석 결과, 기업의 숙련수요 반영정도는 전체 고용결정에 있어서 긍정적인 영향을 미치는 것으로 나타났으며, 특히 과거 기술부족으로 인한 손실발생 경험이 있는 경우 지속고용 및 고용확대를 결정할 가능성이 높은 것으로 나타났다. 즉, 기업이 우수한 인력을 고용하고자 하는 것은 모든 기업의 공통적인 희망사항임에도 그간 중소기업들은 우수한 인력을 선별하는 수단이 부족했을 수 있다는 점을 시사한다. 결과적으로 자격제도의 기업숙련수요 반영정도가 높아질수록 자격 취득자의 지속고용 및 고용확대 가능성이 높아질 수 있고, 국가기술자격제도를 산업체의 구체적인 기술숙련 수요에 대응하는 방향으로 설계해야 할 필요성을 제시한다고 하겠다.

The existing test-based qualification system does not sufficiently reflect the demand for skills in industries and there exist concerns regarding its efficacy. In response, an innovative national technical qualification system, which uses a course-based qualification system, has been introduced to supplement the test-type qualification system. This study investigates the impact of the national technical qualification system on companies' decisions concerning employment by analyzing survey data from companies that employed persons who obtained course-based qualifications. Analysis results found the degree of company demand for skills had a positive impact on overall employment decisions. Especially, it was highly likely for those companies that experienced loss due to the lack of technology in the past to decide continued employment and expansion of employment. This suggests that it is necessary to design the national technical qualification system in response to the demand for technological skills of each industry in the future.

키워드

Table 1. Qualification Framework in Korea(2017.12)

SHGSCZ_2018_v19n11_278_t0001.png 이미지

Table 2. A Comparison between Test-base Qualification System and Course-base Qualification System

SHGSCZ_2018_v19n11_278_t0002.png 이미지

Table 3. Basic Statistics

SHGSCZ_2018_v19n11_278_t0003.png 이미지

Table 4. Results of Bivariate Probit Model Estimation

SHGSCZ_2018_v19n11_278_t0004.png 이미지

Table 5. Results of Heckman Probit Model Estimation

SHGSCZ_2018_v19n11_278_t0005.png 이미지

참고문헌

  1. C. B. Frey, M. A. Osborne, "The Future of Employment: How Susceptible are Jobs to Computerisation?", Technological Forecasting and Social Change, Vol.114, pp. 254-280, Jan., 2017. DOI: https://doi.org/10.1016/j.techfore.2016.08.019
  2. UK Commision for Employment and Skills(UKCES), The Futures of Work: Jobs and Skills in 2030, pp. 1-198, UKCES, 2014. Available From: https://www.gov.uk/government/publications/jobs-and-skills-in-2030.
  3. J. Park, M. J. Um, "An Analysis of Skill Shortage Vacancies in Korean Manufacturing Sectors: Based on the Technology Workforce Demand Survey", Journal of Industrial Economics and Business, Vol.21, No.2, pp. 671-690, Apr., 2008.
  4. S. Kim, J. Park, "An Empirical Study on the Determinants of Technology Workforce Shortages in Korean SMEs", The Korean Small Business Review, Vol.31, No.3, pp. 113-130, Sep., 2009.
  5. Ministry of Employment and Labor(MOEL), Korea Chamber of Commerce and Industry(KCCI), "A Survey on Corporate Employment Behavior", MOEL, 2016, Available From: http://www.moel.go.kr/news/enews/report/enewsView.do?news_seq=6932.(accessed Aug., 2018)
  6. Human Resources Development Service of Korea(HRD Korea), A Report on the Efficiency Evaluation of National Technology Qualification in 2017, Ulsan : HRD Korea.
  7. S. B. Won, S. J. Kang, "A Study on Correlations of Job Competence and Job Fitness with Functions of National Technical Qualification in Mechanical Field", Journal of the Korea Academia-Industrial Cooperation Society, Vol.11, No.12, pp. 4707-4714, Dec., 2010. DOI: http://dx.doi.org/10.5762/KAIS.2010.11.12.4707
  8. G. Becker, Human Capital: A Theoretical and Empirical Analysis, With Special Reference to Education, Chicago : The University of Chicago Press, 1964.
  9. E. N. Wolff, "Human Capital Investment and Economic Growth: Exploring the Cross-country Evidence", Structural Change and Economic Dynamics, Vol.11, No.4, pp. 433-472, 2000. DOI: https://doi.org/10.1016/S0954-349X(00)00030-8
  10. P. M. Romer, "Increasing Returns and Long-Run Growth", Journal of Political Economy, Vol.94, No.5, pp. 1002-1037, 1986. DOI: https://doi.org/10.1086/261420
  11. J. H. Kim, The Economics of Innovation. 4th ed., Seoul : Sigmapress, 2011.
  12. B. Piazza-Georgi, "The Role of Human and Social Capital in Growth: Extending Our Understanding", Cambridge Journal of Economics, Vol.26, No.4, pp. 461-479, 2002. DOI: https://doi.org/10.1093/cje/26.4.461
  13. W. M. Cohen, D. A. Levinthal, "Absorptive Capacity: A New Perspective on Learning and Innovation", Administrative Science Quarterly, Vol.35, No.1, pp. 128-152, Mar., 1990. DOI: http://doi.org/10.2307/2393553
  14. M. A. Schilling, Strategic Management of Technological Innovation, 5th ed., New York: McGraw-Hill Education, 2016.
  15. J. Barney, "Firm Resources and Sustained Competitive Advantage", Journal of Management, Vol.17, No.1, pp. 99-120, Mar., 1991. DOI: https://doi.org/10.1177/014920639101700108
  16. K. H. Bong, J. Park, J. Y. Kim, "A Study on the Effect of Technology Collaboration on Innovation Performance of SMEs: From the Views of Resource-based Theory", Journal of Technology Innovation, Vol.26, No.3, pp. 98-127, Aug., 2018. https://doi.org/10.14386/SIME.2018.26.3.98
  17. G. Wallis, "The Effect of Skill Shortages on Unemployment and Real Wage Growth: A Simultaneous Equation Approach", Royal Economic Society Annual Conference 2003, No.217, Royal Economic Society, 2003. Available From: http://repec.org/res2003/Wallis.pdf
  18. S. H. Kang, "Cross-National Typology of Qualification System by State Intervention and Social Consultation", Korean Journal of Labor Studies, Vol.18, No.2, pp. 213-242, Dec., 2012.
  19. Ministry of Employment and Labor(MOEL), Human Resources Development Service of Korea(HRD Korea), National Technical Qualification Statistical Yearbook 2017, Ulsan : HRD Korea.
  20. M. K. Lee, "Actual Conditions of Professional Qualification Possessor and Effects of Professional Qualification on Employment and Wage", Journal of Human Resource Management Research, Vol.15, No.3, pp. 131-149, Sep., 2008.
  21. G. S. Kim, "The Labor Market Returns to the Professional Engineer Qualification in Korea", Journal of Human Resource Management Research, Vol.16, No.4, pp. 29-46, Dec., 2009.
  22. Y. M. Lee, H. S. Lee, "Analyzing the Impacts of Employees' Acquisition and Retention of Vocational Certification on Employment, Wage, Job Satisfaction, and Organizational Commitment in Medium-Sized Corporations", Journal of Human Resource Management Research, Vol.15, No.3, pp. 27-45, Jun., 2011.
  23. A. K. Kim, S. H. Kang, "The Factors of the Acquisition of Qualifications and the Employment and Wage Effects of the Acquisition of Qualifications", Korean Journal of Labor Economics, Vol.27, No.1, pp. 1-25, Apr., 2004.
  24. Y. H. Lee, H. J. Kwon, "The Effect of Occupational Certification on the Labor Market of the Graduate Youth", The Journal of Vocational Education Research, Vol.28, No.4, pp. 95-111., Dec., 2009.
  25. A. C. Cameron, P. K. Trivedi, Microeconometrics Using Stata, Revised Edition, College Station: Stata Press, 2010.
  26. S. Oh, S. Jung, J. Park, "The Effect of the Shortage of Industrial Technology Workforce on a Corporation's Performance", Productivity Review, Vol.30, No.1, pp. 53-73, Mar., 2016.