DOI QR코드

DOI QR Code

Analytical Study on Improvement in Load Sharing for Planetary Gear Set using Floating Ring Gear

  • Chung, Woo-Jin (Department of Biosystems & Biomaterials Science and Engineering, Seoul National University) ;
  • Choi, Kyujeong (Department of Biosystems & Biomaterials Science and Engineering, Seoul National University) ;
  • Oh, Jooseon (Department of Biosystems & Biomaterials Science and Engineering, Seoul National University) ;
  • Park, Young-Jun (Department of Biosystems & Biomaterials Science and Engineering, Seoul National University) ;
  • Lee, Ki-Hun (R&D Team, SEIL Industrial Co., Ltd.)
  • Received : 2018.11.05
  • Accepted : 2018.11.14
  • Published : 2018.12.01

Abstract

Purpose: The load on the planet gear of a planetary gear set is uniformly distributed. However, manufacturing and assembly errors cause uneven load sharing in the planetary gear set. To solve this problem, most studies have suggested applying a floating sun gear to the planetary gear set. However, the effect of the floating ring gear and floating carrier has not been extensively studied. This study aimed to investigate the effect of the floating ring gear. Methods: Two models were developed; one was the fixed ring gear model, and the other was the floating ring gear model. In the fixed ring gear model, the clearance between the ring gear and the housing was $0{\mu}m$, and in the floating ring gear model, the clearance was from $10{\mu}m$ to $100{\mu}m$. The load sharing of the planetary gear set was evaluated by the load sharing factor. Results: Our study showed that with increase in clearance, the load sharing factor of the planetary gear set approached unity. In addition, when the clearance increased above a certain level by which a fully floating ring gear was achieved, the load sharing factor was not affected by the clearance. Conclusions: This indicates that the fully floating ring gear increased the power density of the planetary gearbox by uniformly dividing the load of the planetary gear set. For this reason, the size of the gearbox could be decreased by using a fully floating ring gear.

Keywords

References

  1. ANSI/AGMA. 2006. ANSI/AGMA 6123-B06: Design Manual for Enclosed Epicyclic Gear Drives. Virginia, USA: American National Standards Institute/American Gear Manufacturers Association.
  2. Bayindir, K. C., M. A. Gozukucuk and A. Teke. 2011. A comprehensive overview of hybrid electric vehicle: Powertrain configurations, powertrain control techniques and electronic control units. Energy Conversion and Management 52(2): 1305-1313. https://doi.org/10.1016/j.enconman.2010.09.028
  3. Bodas, A. and A. Kahraman. 2004. Influence of carrier and gear manufacturing errors on the static load sharing behavior of planetary gear sets. JSME International Journal Series C Mechanical Systems, Machine Elements and Manufacturing 47(3): 908-915. https://doi.org/10.1299/jsmec.47.908
  4. Iglesias, M., A. Femandez del Rincon, A. de-Juan, P. Garcia, A. Diez-Ibarbia and F. Viadero. 2017. Planetary transmission load sharing: Manufacturing errors and system configuration study. Mechanism and Machine Theory 111: 21-38. https://doi.org/10.1016/j.mechmachtheory.2016.12.010
  5. Kahraman, A. 1994. Load sharing characteristics of planetary transmissions. Mechanism and Machine Theory 29(8): 1151-1165. https://doi.org/10.1016/0094-114X(94)90006-X
  6. Kahraman, A. and S. Vijayakar. 2001. Effect of internal gear flexibility on the quasi-static behavior of a planetary gear set. Journal of Mechanical Design 123(3): 408-415. https://doi.org/10.1115/1.1371477
  7. Kim, J. G., Y. -J. Park, G. H. Lee, J. Y. Oh and Y. J. Kim. 2017. A study on the load sharing among planet gears according to the phase of carrier pinhole position error in the planetary gearbox. Journal of the Korean Society of Precision Engineering 34(6): 377-382 (In Korean, with English abstract). https://doi.org/10.7736/KSPE.2017.34.6.377
  8. Kim, J. -H. and D. -I. D. Cho. 1997. An automatic transmission model for vehicle control. In: Proceedings of Conference on Intelligent Transportation Systems, pp. 759-764. Boston, MA, USA: November 1997.
  9. Kim, T. -H., S. -J. Lee and W. Choi. 2011. Design and control of the phase shift full bridge converter for the onboard battery charger of the electric forklift. In: 8th International Conference on Power Electronics - ECCE Asia, pp. 2709-2716. Jeju, South Korea: May -June 2011.
  10. Nejad, A. R., Y. Xing, Y. Guo, J. Keller, Z. Gao and T. Moan. 2015. Effects of floating sun gear in a wind turbine's planetary gearbox with geometrical imperfections. Wind Energy 18(12): 2105-2120. https://doi.org/10.1002/we.1808
  11. Noh, S. Y., L. S. Kim., S. H. Cho and S. K. Lyu. 2017. Study on the tooth micro-geometry optimization of planetary gear for drive reducer. Journal of the Korean Society for Precision Engineering 34(6): 371-376 (In Korean, with English abstract). https://doi.org/10.7736/KSPE.2017.34.6.371
  12. Park, S. M., T. W. Park, S. H. Lee, S. W. Han and S. K. Kwon. 2010. Analysis study to estimate the performance of the power shift drive (PSD) axle for a forklift. International Journal of Automotive Technology 11(1): 49-56. https://doi.org/10.1007/s12239-010-0007-3
  13. Park, Y.-J., J.-G. Kim, G.-H. Lee and S. B. Shim. 2015. Load sharing and distributed on the gear flank of wind turbine planetary gearbox. Journal of Mechanical Science and Technology 29(1): 309-316. https://doi.org/10.1007/s12206-014-1237-5
  14. Park, Y.-J., G.-H. Lee, Y.-Y. Nam and J.-K. Kim. 2012. Influence of flexible pin for planets on service life of wind turbine gearboxes. Transactions of the Korean Society of Mechanical Engineers A 36(9): 953-960 (In Korean, with English abstract). http://dx.doi.org/10.3795/KSME-A.2012.36.9.953
  15. Park, Y.-J., G.-H. Lee, J.-S. Song and Y.-Y. Nam. 2013. Characteristic analysis of wind turbine gearbox considering non-torque loading. Journal of Mechanical Design 135(4): 044501. https://doi.org/10.1115/1.4023590
  16. RomaxDesigner. 2017. RomaxDesigner Software Manual. R17. Nottingham, UK: Romax Technology Ltd.
  17. Shin, Y. I., C. H. Yoon, S. G. Han, S. G. Park and C. K. Song. 2016. Design improvement for a planetary gear system in hydraulic drive system. Journal of the Korean Society for Precision Engineering 33(10): 851-856 (In Korean, with English abstract). http://dx.doi.org/10.7736/KSPE.2016.33.10.851
  18. Singh, A. 2010. Load sharing behavior in epicyclic gears: Physical explanation and generalized formulation. Mechanism and Machine Theory 45(3): 511-530. https://doi.org/10.1016/j.mechmachtheory.2009.10.009