한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제17권6호
  • /
  • Pages.46-52
  • /
  • 2018
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

가역투자율를 이용한 초초임계압 내열강의 기계적 열화에 관한 비파괴평가

Nondestructive Evaluation for Mechanical Degradation of Ultrasuper-Critical Heat-Resistance Steel by Reversible Permeability

  • 안성빈 (조선대학교 재료공학과) ;
  • 김재진 (조선대학교 재료공학과) ;
  • 서동민 (조선대학교 재료공학과) ;
  • 김정석 (조선대학교 재료공학과)
  • Ahn, SeongBin (Department of Materials Science and Engineering, Chosun UNIV.) ;
  • Kim, JaeJin (Department of Materials Science and Engineering, Chosun UNIV.) ;
  • Seo, DongMin (Department of Materials Science and Engineering, Chosun UNIV.) ;
  • Kim, ChungSeok (Department of Materials Science and Engineering, Chosun UNIV.)
  • 투고 : 2018.09.10
  • 심사 : 2018.10.02
  • 발행 : 2018.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Nondestructive evaluation for mechanical degradation of ultrasuper-critical (USC) heat-resistance steel, which is attractive to the next generation of power plants is studied by magnetic reversible permeability. The interrelationship between reversible permeability and high-temperature mechanical degradation has been investigated by precise measurement of permeability nondestructively. Also, the effects of microstructural variation on reversible permeability are discussed. Isothermal aging was observed to coarsen the tempered carbides ($Cr_{23}C_6$), generated the intermetallic phases ($Fe_2W$), and grow rapidly during aging. The dislocation density also decreases steeply within lath interior. The peak to peak interval (PPI) of reversible permeability profile decreased drastically during the initial 500 h aging period, and was thereafter observed to decrease only slightly. The variation in PPI is closely related to the decrease in the number of pinning sites and the degradation in tensile strength.

키워드

참고문헌

  1. Abe, F., “Bainitic and Martensitic Creep-Resistant Steels,” Current Opinion in Solid State and Materials Science, Vol. 8, No. 3, pp. 305-311, 2004. https://doi.org/10.1016/j.cossms.2004.12.001
  2. Kim, C. S., “A Study of the Heat Treatment Effect on the Fatigue Crack Growth Low-Carbon Steel and AISI316 Authentic Stainless Steel,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17, No. 3, pp. 16-21, 2018. https://doi.org/10.14775/ksmpe.2018.17.3.016
  3. Kimura, M., Yamaguchi, K., Hayakawa, M., Kobayashi, K., Kanazawa, K., "Microstructures of Creep-fatigued 9-12% Cr Ferritic Heat-resisting Steels," International Journal of Fatigue, Vol. 28, No. 3, pp. 300-308, 2006. https://doi.org/10.1016/j.ijfatigue.2005.04.013
  4. Kim, C. S., Park, I. K., Jhang, K. Y., "Nonlinear ultrasonic characterization of thermal degradation in ferritic 2.25Cr-1Mo steel," NDT & E Int.ernational Vol. 42, No. 3, pp. 204-209, 2009. https://doi.org/10.1016/j.ndteint.2008.09.002
  5. Luxenburger, S., Arnold, W., "Laser ultrasonic absorption measurement in fatigue-damaged materials," Ultrasonics, Vol. 40, No. 1-8, pp. 797-801, 2002. https://doi.org/10.1016/S0041-624X(02)00212-3
  6. Dobmann, G., Kroning, M., Theiner, W., Willems, H., Fiedler, U., “Nondestructive characterization of materials (ultrasonic and micromagnetic techniques) for strength and toughness prediction and the detection of early creep damage,” Nuclear Engineering Design, Vol. 157, No. 1-2, pp. 137-158, 1995. https://doi.org/10.1016/0029-5493(95)00992-L
  7. Gupta, S., Ray, A., Keller, E., “Online fatigue damage monitoring by ultrasonic measurements: A symbolic dynamics approach,” International Journal of Fatigue, Vol. 29, No. 6, pp. 1100-1114, 2007. https://doi.org/10.1016/j.ijfatigue.2006.09.011
  8. Kim, C. S., Kwun, S. I., “Influence of Precipitate and Martensite Lath on the Magnetic Properties in Creep Damaged 11Cr-3.45W Steel,” Journal of Materials Transactions, Vol. 48, No. 11, pp. 3028-3030, 2007. https://doi.org/10.2320/matertrans.MEP2007176
  9. Ryu, K. S., Nahm, S. H., Park, J. S., Yu, K. M., Kim, Y. B., Son, D. R., "Nondestructive evaluation of aged 1Cr-1Mo-0.25 V steel by harmonic analysis of induced voltage," Journal of magnetism and magnetic material, Vol. 231, No. 2-3, pp. 294-298, 2001. https://doi.org/10.1016/S0304-8853(01)00177-9
  10. Ryu, K. S., Kim, Y. I., Nahm, S. H., Yu, K. M., Cho, Y., Son, D. R., "Degradation Evaluation of 1Cr-lMo-0.25V Steel by Measuring Reversible Magnetic Permeability," Journal of the Korean Society for Nondestructive Testing, Vol. 20, No. 5, pp. 445-450, 2000.
  11. Cullity, B. D., Introduction to Magnetic Materials, Reading, Mass., Addison-Wesley Pub. Co., 1972.
  12. Verhoeven, J. D., Fundamentals of Physical Metallurgy, John Wiley & Sons, New Yrok, USA, 1975.