DOI QR코드

DOI QR Code

Quantitative Analysis of Workload for Classifying the Operating Area of Distribution Control Center

배전관제센터의 운전영역 구분을 위한 정량적 업무량 분석

  • Go, Seok-Il (Dept. of Electrical and Engineering, Chonnam National University) ;
  • Seo, Dong-Kwen (Namseoul Regional Headquarters, Korea Electric Power Corporation) ;
  • Choi, Joon-Ho (Dept. of Electrical and Engineering, Chonnam National University) ;
  • Ahn, Seon-Ju (Dept. of Electrical and Engineering, Chonnam National University) ;
  • Kim, Hyun-Woo (Dept. of Electrical and Engineering, Chonnam National University) ;
  • Yun, Sang-Yun (Dept. of Electrical Engineering, Chonnam National University)
  • Received : 2018.10.08
  • Accepted : 2018.10.29
  • Published : 2018.12.01

Abstract

In recent, KEPCO (Korea Electric Power Corporation) faced difficulties of the DCC (distribution control center) due to the increase of field equipment and operational cost, and aging of operating staffs. In response to these changes in the DCC, KEPCO is trying to change the organization and system of the DCC. In this paper, we present a new attempt to change organization and structure of distribution control center, which was implemented by KEPCO recently. This paper is divided into three major parts. First, to examine the adequacy of the divided basis of current DCCs based on the quantity of installed electrical equipment, we analyzed the correlation between the operational history of the DCCs and the number of equipment. Through the analysis, we confirmed that there is little relationship between the number of equipment and actual workload. Second, we conducted visits and questionnaire surveys of all the DCCs to identify factors affecting the actual workload of distribution operators and then summarized the results. Third, based on this survey, a general formula for analyzing the workload of a DCC was derived, and each DCC's average annual total workload, day/night workload, and required number of personnel were calculated. Through this study, we proposed a more realistic management method of DCCs that can overcome the division criteria based on equipment quantity.

Keywords

References

  1. C. L. Smallwood and J. Wennermark, "Benefits of Distribution Automation," IEEE Industry Applications Magazine, vol. 16, no. 1, pp. 65-73, Jan/Feb 2010. https://doi.org/10.1109/MIAS.2009.934970
  2. B.-N. Ha, "The Study on Economic Evaluation for Investment Cost When the Distribution Automation System is Applied," Electrical Journal, pp. 407-413, 2003.
  3. B.-N. Ha, "Large-Scale Distribution Automation System," Electrical Journal, pp. 18-26, 2002.
  4. N.-H. Cho, R. Bhat, and J.-H. Lee, "Field Experience of Distribution Automation System (DAS) in Korea Electric Power Corporation (KEPCO)," 2015 International Symposium on Smart Electric Distribution Systems and Technologies (EDST), pp. 307-312, 2015.
  5. B.-N. Ha et al., "Development of Intelligent Distribution Automation System with the Function of Substation SCADA, Power Quality Monitoring and Diagnosis Condition Monitoring," The Trans. of the KIEE, vol. 59, no. 10, pp. 1776-1786, October 2002.
  6. D.-H. Park, "Wide Area Operation and IT Trends of DCC," Journal of the Electrical World, pp. 31-34, June 2009.
  7. J. Fan and S. Borlase, "The Evolution of Distribution," IEEE Power Energy Magazine, vol. 7, pp. 63-68, 2009.
  8. A. Vargas and M. E. Samper, "Real-Time Monitoring and Economic Dispatch of Smart Distribution Grids: High Performance Algorithms for DMS Applications," IEEE Trans on Smart Grid, vol. 3, pp. 866-877, 2012. https://doi.org/10.1109/TSG.2012.2187078
  9. I.-H. Lim, S.-J. Lee, J.-H. Park and Y.-H. Shin, "A Design of Advanced Distribution Management System Based on IT/OT Convergence," The Trans. of the KIEE, vol. 65, no. 5, pp. 753-759, May 2016.
  10. Distribution Department of KEPCO, Research Project for Improvement of Operation Architecture of Distribution Control Center, Korea Electric Power Corporation, 2004.
  11. KEPCO, http://kosis.kr/statHtml/statHtml.do?orgId=310&tblId=TX_31002_A011&conn_path=I3
  12. Anthony Hayter, Probability and Statistics for Engineers and Scientists, 4th Edition, Cengage Learning Korea, 2014.