Environmental Engineering Research

  • 제23권4호
  • /
  • Pages.383-389
  • /
  • 2018
  • /
  • 1226-1025(pISSN)
  • /
  • 2005-968X(eISSN)
대한환경공학회 (Korean Society of Environmental Engineers)
권호 표지
DOI QR코드

DOI QR Code

Improved structures of stainless steel current collector increase power generation of microbial fuel cells by decreasing cathodic charge transfer impedance

  • Nam, Taehui (Department of Environment and Energy Engineering, Chonnam National University) ;
  • Son, Sunghoon (Department of Environment and Energy Engineering, Chonnam National University) ;
  • Kim, Eojn (Department of Environment and Energy Engineering, Chonnam National University) ;
  • Tran, Huong Viet Hoa (Department of Environment and Energy Engineering, Chonnam National University) ;
  • Koo, Bonyoung (Department of Environment and Energy Engineering, Chonnam National University) ;
  • Chai, Hyungwon (Department of Environment and Energy Engineering, Chonnam National University) ;
  • Kim, Junhyuk (Department of Environment and Energy Engineering, Chonnam National University) ;
  • Pandit, Soumya (The Zuckerberg Institute for Water Research, Ben-Gurion University of the Negev) ;
  • Gurung, Anup (Department of Biological Environment, Kangwon National University) ;
  • Oh, Sang-Eun (Department of Biological Environment, Kangwon National University) ;
  • Kim, Eun Jung (Department of Environmental Engineering, Mokpo National University) ;
  • Choi, Yonghoon (Department of Electrical Engineering, Chonnam National University) ;
  • Jung, Sokhee P. (Department of Environment and Energy Engineering, Chonnam National University)
  • 투고 : 2017.11.08
  • 심사 : 2018.04.02
  • 발행 : 2018.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Microbial fuel cell (MFC) is an innovative environmental and energy system that converts organic wastewater into electrical energy. For practical implementation of MFC as a wastewater treatment process, a number of limitations need to be overcome. Improving cathodic performance is one of major challenges, and introduction of a current collector can be an easy and practical solution. In this study, three types of current collectors made of stainless steel (SS) were tested in a single-chamber cubic MFC. The three current collectors had different contact areas to the cathode (P $1.0cm^2$; PC $4.3cm^2$; PM $6.5cm^2$) and increasing the contacting area enhanced the power and current generations and coulombic and energy recoveries by mainly decreasing cathodic charge transfer impedance. Application of the SS mesh to the cathode (PM) improved maximum power density, optimum current density and maximum current density by 8.8%, 3.6% and 6.7%, respectively, comparing with P of no SS mesh. The SS mesh decreased cathodic polarization resistance by up to 16%, and cathodic charge transfer impedance by up to 39%, possibly because the SS mesh enhanced electron transport and oxygen reduction reaction. However, application of the SS mesh had little effect on ohmic impedance.

키워드

참고문헌

  1. Logan BE. Peer reviewed: Extracting hydrogen and electricity from renewable resources. Environ. Sci. Technol. 2004;38:160A-167A. https://doi.org/10.1021/es040468s
  2. Lovley DR. Bug juice: Harvesting electricity with microorganisms. Nat. Rev. Microbiol. 2006;4:497-508. https://doi.org/10.1038/nrmicro1442
  3. Rabaey K, Verstraete W. Microbial fuel cells: Novel biotechnology for energy generation. Trends Biotechnol. 2005;23:291-298. https://doi.org/10.1016/j.tibtech.2005.04.008
  4. Jung SP. Practical implementation of microbial fuel cells for bioelectrochemical wastewater treatment. J. Korean Soc. Urban Environ. 2013;13:93-100.
  5. Lee T, Okamoto A, Jung S, et al. Microbial electrochemical technologies producing electricity and valuable chemicals from biodegradation of waste organic matters. In: Yates M NC, Miller R, Pillai S, eds. Manual of environmental microbiology. 4th ed. American Society of Microbiology; 2016. p. 5.1.4-1-5.1.4-14.
  6. Logan BE, Hamelers B, Rozendal R, et al. Microbial fuel cells: Methodology and technology. Environm. Sci. Technol. 2006;40:5181-5192. https://doi.org/10.1021/es0605016
  7. Logan BE, Regan JM. Microbial fuel cells-challenges and applications. Environ. Sci. Technol. 2006;40:5172-5180. https://doi.org/10.1021/es0627592
  8. Oh S, Min B, Logan BE. Cathode performance as a factor in electricity generation in microbial fuel cells. Environ. Sci. Technol. 2004;38:4900-4904. https://doi.org/10.1021/es049422p
  9. Zhang F, Saito T, Cheng S, Hickner MA, Logan BE. Microbial fuel cell cathodes with poly (dimethylsiloxane) diffusion layers constructed around stainless steel mesh current collectors. Environ. Sci. Technol. 2010;44:1490-1495. https://doi.org/10.1021/es903009d
  10. Zuo Y, Cheng S, Logan BE. Ion exchange membrane cathodes for scalable microbial fuel cells. Environ. Sci. Technol. 2008;42:6967-6972. https://doi.org/10.1021/es801055r
  11. Zhang F, Merrill MD, Tokash JC, et al. Mesh optimization for microbial fuel cell cathodes constructed around stainless steel mesh current collectors. J. Power Sources 2011;196:1097-1102. https://doi.org/10.1016/j.jpowsour.2010.08.011
  12. Dong H, Yu H, Wang X. Catalysis kinetics and porous analysis of rolling activated carbon-PTFE air-cathode in microbial fuel cells. Environ. Sci. Technol. 2012;46:13009-13015. https://doi.org/10.1021/es303619a
  13. Wang X, Feng C, Ding N, et al. Accelerated $OH^-$ transport in activated carbon air cathode by modification of quaternary ammonium for microbial fuel cells. Environ. Sci. Technol. 2014;48:4191-4198. https://doi.org/10.1021/es5002506
  14. Liu H, Ramnarayanan R, Logan BE. Production of electricity during wastewater treatment using a single chamber microbial fuel cell. Environ. Sci. Technol. 2004;38:2281-2285. https://doi.org/10.1021/es034923g
  15. Cheng S, Liu H, Logan BE. Power densities using different cathode catalysts (Pt and CoTMPP) and polymer binders (Nafion and PTFE) in single chamber microbial fuel cells. Environ. Sci. Technol. 2006;40:364-369. https://doi.org/10.1021/es0512071
  16. Kim BH, Chang IS, Gadd GM. Challenges in microbial fuel cell development and operation. Appl. Microbiol. Biotechnol. 2007;76:485-494. https://doi.org/10.1007/s00253-007-1027-4
  17. Yuan H, Hou Y, Abu-Reesh IM, Chen J, He Z. Oxygen reduction reaction catalysts used in microbial fuel cells for energy-efficient wastewater treatment: A review. Mater. Horiz. 2016;3:382-401. https://doi.org/10.1039/C6MH00093B
  18. Cheng S, Liu H, Logan BE. Increased performance of single-chamber microbial fuel cells using an improved cathode structure. Electrochem. Commun. 2006;8:489-494. https://doi.org/10.1016/j.elecom.2006.01.010
  19. Dong H, Yu H, Wang X, Zhou Q, Feng J. A novel structure of scalable air-cathode without Nafion and Pt by rolling activated carbon and PTFE as catalyst layer in microbial fuel cells. Water Res. 2012;46:5777-5787. https://doi.org/10.1016/j.watres.2012.08.005
  20. Logan B, Cheng S, Watson V, Estadt G. Graphite fiber brush anodes for increased power production in air-cathode microbial fuel cells. Environ. Sci. Technol. 2007;41:3341-3346. https://doi.org/10.1021/es062644y
  21. Koo B, Kang H, Nam T, Kim E, Son S, Jung SP. Performance enhancement of a microbial fuel cell by physico-chemical treatments of activated-carbon catalyst of an air cathode. J. Korean Soc. Urban Environ. 2016;16:431-439.
  22. Middaugh J, Cheng S, Liu W, Wagner R. How to make cathodes with a diffusion layer for single-chamber microbial fuel cells. 2006.
  23. Escapa A, San-Martin M, Mateos R, Moran A. Scaling-up of membraneless microbial electrolysis cells (MECs) for domestic wastewater treatment: Bottlenecks and limitations. Bioresour. Technol. 2015;180:72-78. https://doi.org/10.1016/j.biortech.2014.12.096
  24. Liu H, Logan BE. Electricity generation using an air-cathode single chamber microbial fuel cell in the presence and absence of a proton exchange membrane. Environ. Sci. Technol. 2004;38:4040-4046. https://doi.org/10.1021/es0499344
  25. Kang H, Jeong J, Gupta PL, Jung SP. Effects of brush-anode configurations on performance and electrochemistry of microbial fuel cells. Int. J. Hydrogen Energ. 2017;42:27693-27700. https://doi.org/10.1016/j.ijhydene.2017.06.181
  26. Nam T, Son S, Koo B, et al. Comparative evaluation of performance and electrochemistry of microbial fuel cells with different anode structures and materials. Int. J. Hydrogen Energ. 2017;42:27677-27684. https://doi.org/10.1016/j.ijhydene.2017.07.180
  27. Feng Y, Yang Q, Wang X, Logan BE. Treatment of carbon fiber brush anodes for improving power generation in air-cathode microbial fuel cells. J. Power Sources 2010;195:1841-1844. https://doi.org/10.1016/j.jpowsour.2009.10.030
  28. Jung S. Impedance analysis of Geobacter sulfurreducens PCA, Shewanella oneidensis MR-1, and their coculture in bioeletrochemical systems. Int. J. Electrochem. Sci. 2012;7:11091-11100.
  29. Jung S, Mench MM, Regan JM. Impedance characteristics and polarization behavior of a microbial fuel cell in response to short-term changes in medium pH. Environ. Sci. Technol. 2011;45:9069-9074. https://doi.org/10.1021/es201737g
  30. Jung S, Regan JM. Comparison of anode bacterial communities and performance in microbial fuel cells with different electron donors. Appl. Microbiol. Biotechnol. 2007;77:393-402. https://doi.org/10.1007/s00253-007-1162-y
  31. Aelterman P, Rabaey K, Pham HT, Boon N, Verstraete W. Continuous electricity generation at high voltages and currents using stacked microbial fuel cells. Environ. Sci. Technol. 2006;40:3388-3394. https://doi.org/10.1021/es0525511
  32. Fan Y, Sharbrough E, Liu H. Quantification of the internal resistance distribution of microbial fuel cells. Environ. Sci. Technol. 2008;42:8101-8107. https://doi.org/10.1021/es801229j
  33. Le Bozec N, Compere C, L'Her M, Laouenan A, Costa D, Marcus P. Influence of stainless steel surface treatment on the oxygen reduction reaction in seawater. Corros. Sci. 2001;43:765-786. https://doi.org/10.1016/S0010-938X(00)00113-X
  34. Kim YP, Fregonese M, Mazille H, Feron D, Santarini G. Study of oxygen reduction on stainless steel surfaces and its contribution to acoustic emission recorded during corrosion processes. Corros. Sci. 2006;48:3945-3959. https://doi.org/10.1016/j.corsci.2006.03.006
  35. Dumas C, Mollica A, Feron D, Basseguy R, Etcheverry L, Bergel A. Marine microbial fuel cell: Use of stainless steel electrodes as anode and cathode materials. Electrochim. Acta. 2007;53:468-473. https://doi.org/10.1016/j.electacta.2007.06.069
  36. Jung S, Oh S-E, Lee J, et al. Impedance and thermodynamic analysis of bioanode, abiotic anode, and riboflavin-amended anode in microbial fuel cells. Bull. Korean Chem. Soc. 2012;33:3349-3354. https://doi.org/10.5012/bkcs.2012.33.10.3349
  37. Logan BE, Wallack MJ, Kim K-Y, He W, Feng Y, Saikaly PE. Assessment of microbial fuel cell configurations and power densities. Environ. Sci. Technol. Lett. 2015;2:206-214. https://doi.org/10.1021/acs.estlett.5b00180

피인용 문헌

  1. 침지형 미생물연료전지에서 유입 COD 및 HRT 변화가 하수 수준의 질소 제거에 미치는 영향 vol.40, pp.8, 2018, https://doi.org/10.4491/ksee.2018.40.8.314
  2. PtFe catalysts supported on hierarchical porous carbon toward oxygen reduction reaction in microbial fuel cells vol.23, pp.9, 2018, https://doi.org/10.1007/s10008-019-04367-6
  3. Simple and Precise Approach for Determination of Ohmic Contribution of Diaphragms in Alkaline Water Electrolysis vol.9, pp.10, 2019, https://doi.org/10.3390/membranes9100129
  4. Recent Trends of Oxygen Reduction Catalysts in Microbial Fuel Cells: A Review vol.41, pp.11, 2019, https://doi.org/10.4491/ksee.2019.41.11.657
  5. CH4 control and associated microbial process from constructed wetland (CW) by microbial fuel cells (MFC) vol.260, pp.None, 2018, https://doi.org/10.1016/j.jenvman.2020.110071
  6. Electric power generation from sediment microbial fuel cells with graphite rod array anode vol.25, pp.2, 2018, https://doi.org/10.4491/eer.2018.361
  7. Agricultural Wastes For Electricity Generation Using Microbial Fuel Cells vol.14, pp.1, 2018, https://doi.org/10.2174/1874070702014010052
  8. 하폐수처리에서 질소 제거를 위한 미생물 전기화학 기술의 동향 vol.34, pp.5, 2018, https://doi.org/10.11001/jksww.2020.34.5.345
  9. Oxygen-deficient TiO2 decorated carbon paper as advanced anodes for microbial fuel cells vol.366, pp.None, 2018, https://doi.org/10.1016/j.electacta.2020.137468
  10. Long-term electricity generation and denitrification performance of MFCs with different exchange membranes and electrode materials vol.140, pp.None, 2021, https://doi.org/10.1016/j.bioelechem.2021.107748
  11. Polypropylene biofilm carrier and fabricated stainless steel mesh supporting activated carbon: Integrated configuration for performances enhancement of microbial fuel cell vol.46, pp.None, 2021, https://doi.org/10.1016/j.seta.2021.101268
  12. Recent Trends and Prospects of Microbial Fuel Cell Technology for Energy Positive Wastewater Treatment Plants Treating Organic Waste Resources vol.43, pp.10, 2018, https://doi.org/10.4491/ksee.2021.43.10.623
  13. Improvement of air cathode performance in microbial fuel cells by using catalysts made by binding metal-organic framework and activated carbon through ultrasonication and solution precipitation vol.424, pp.None, 2018, https://doi.org/10.1016/j.cej.2021.130388
  14. Novel Ti/TiHx/SnO2-Sb2O5-NiO-CNT electrode for electrochemical Ozone Generation for degradation of toxic textile azo dyes vol.27, pp.3, 2018, https://doi.org/10.4491/eer.2020.429