References
- Kim, J. Y., Park, D. K., Lee, G. I., Gao, J. C., "Research on the Design of the Ultra-high-precision Positioning Control Error Compensation," IJPEM pp. 1351-1358, 2016.
- Kim, J. Y., Lee, H. N., Kwac, L. K., Han, J. H., Cho Y. T., Jun C. G., "Control Performance Evaluation of Ultra Precision Positioning Apparatus," Proc. ISIM 2000, pp. 252-255, 2000.
- Lee, G. L., and Kim, J. Y., Yoon, S. U., Jung, Y. S., "Assessment of soundness by applying of Optimal design hybrid CURVIC gear and IRT technique," Journal of Advanced Engineering and Technology, Vol. 9, No. 4, pp. 309-314, 2016.
- Kim, J. Y., and Roh. C. S., Lee. G. I., Jung. Y. S., "Integrity Evaluation By IRT Technique And FEM Analysis Of Spur Gear," Journal of The Korean Society of Tribologists & Lubrication Engineering, Vol. 32, No. 4, pp. 113-118, 2016. https://doi.org/10.9725/kstle.2016.32.4.113
- Geyl, R., "Design and Farication of Three Mirror Flat Field Anastigmat for High Resolution Earth Observation," SPIE, Vol.2210, pp. 739-745, 1994.
- Park, D. K., "A Study on the Performance Evaluation about nm-level design of Ultra-precision Machine and Error Compensation Produced," A Thesis for a Doctorate, Chosun University, Republic of Korea, 2016.
- Jeong, J. U., Kwon, S. J., Chu, B. S., Park, J. Y., "Unified-type Design and Structural Analysis for Mecanum Wheel Performance Improvement," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 2, pp. 117-123, 2014. https://doi.org/10.14775/ksmpe.2014.13.2.117
- Cho, J. H., Moon, D. J., Lee, J. C., "A Study om the CAE Analysis of Bed of Multi-Tasking Machine for Automotive Power Train Shafts," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 1, pp. 9-14, 2015. https://doi.org/10.14775/ksmpe.2015.14.1.009
- Choi, Y. S., Lee, W. S., Hwang, I. H., Park, H. K., Jo, H. T., Lee, Y. S., Kim, K. J., Song, S. T., Lee, J. C., "A Study on the Structural Analysis of Automotive Crankshaft Multi Grinding Machine," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 1, pp. 20-25, 2012.
- Han, M. S., Jo, J. U., "A Study on Durability of Under Bar at car through Structural and Fatigue Analysis," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 2, pp. 44-50, 2015. https://doi.org/10.14775/ksmpe.2015.14.2.044
- Jeong, S. H., Cha, K. R., Kim, H. U., Na, Y. C., "Development of Virtual Prototype for Labeling Unit on the Automatic Battery Manufacturing Line," KSMTE Conference, 2002. 4., pp. 357-362, 2002.
- Lee, G. I., Kim, J. Y., "Evaluation of Reliability of Large Hybrid Curvic Gear by Using Thermography," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 3, pp. 146-152, 2017.
Cited by
- 가공정밀도에 영향을 미치는 환경요소 분석 vol.20, pp.7, 2021, https://doi.org/10.14775/ksmpe.2021.20.07.015
- Study on Ultra-precision Machining of Si Optics Using Laser-assisted Machining vol.30, pp.5, 2018, https://doi.org/10.7735/ksmte.2021.30.5.339