Journal of the Korean Society of Radiology (한국방사선학회논문지)

The Korean Society of Radiology (한국방사선학회)
권호 표지
DOI QR코드

DOI QR Code

A Case Study of Three Dimensional Human Mimic Phantom Production for Imaging Anatomy Education

영상해부학 교육을 위한 3차원 인체 모사 조형물 제작 사례 연구

  • Seoung, Youl-Hun (Department of Radiological Science, College of Health Medical Science, Cheongju University)
  • 성열훈 (청주대학교 보건의료과학대학 방사선학과)
  • Received : 2018.01.17
  • Accepted : 2018.02.28
  • Published : 2018.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, human mimic phantoms outputted by three-dimensional (3D) printing technology are reported. Polylactic acid and a personal 3D printer - fused deposition modeling (FDM) - are used as the main material and the printing device. The output of human mimic phantoms performed in the following order: modeling, slicing and G-code conversion, output variable setting, 3D output, and post-processing. The students' learning satisfaction (anatomical awareness, study interest) was measured on 5-point Likert scale. After that, Twenty of those phantoms were outputted. The total output took 11,691 minutes (194 hours 85 minutes) and the average output took 584.55 minutes (9 hours 7 minutes). The filament used for the experiment was 2,390.2 g, and the average use of the filament was 119.51 g. The learning satisfaction of anatomical awareness was 4.6 points on the average and the interest of the class was on average 4.5 points. It is expecting that 3D printing technology can enhance the learning effect of imaging anatomy education.

본 연구에서는 인체 모사 조형물을 3차원 프린팅으로 출력한 사례를 보고하고자 하였다. 재료는 용융적층방식의 개인용 3차원 프린터 장비와 폴리락트산을 소재로 사용하였다. 3차원 인체 모사 조형물 출력은 모델링하는 단계, 평면화 작업과 G-code 변환 단계,출력변수 설정 단계, 3D 출력단계, 마지막으로 후처리 단계 순으로 진행하였으며, 학생들의 학습만족도(해부학인지도, 수업흥미도)를 리커트 5 점 척도로 조사하였다. 그 결과, 총 20가지의 3차원 인체 모사 조형물을 성공적으로 출력하였다. 총 출력소요시간은 11,691분(194시간 85분)이었으며 평균 출력소요시간은 584.55분(9시간 7분)이었다. 이에 소요된 필라멘트량은 총 2,390.2 g 이었으며 평균 119.51 g 이 소요되었다. 학습만족도의 해부학인지도는 평균 4.6 점, 수업흥미도는 평균 4.5 점으로 높은 것으로 나타났다. 앞으로 3차원 프린팅 기술은 영상해부학 교육의 학습효과를 높여줄 수 있으리라 기대한다.

Keywords

References

  1. C. H. Song, Historical Figures in Anatomy, Jeong Seok Publishing, 2015.
  2. W. B. Lee, S. H. Baik, "Status of Cadaver Collection of Medical Colleges for Their Anatomy Education in Korea," Korean Journal of Physical Anthropology, Vol. 11, No. 2, pp. 237-246, 1998. https://doi.org/10.11637/kjpa.1998.11.2.237
  3. B. H. Kang, J. S. Kim, H. W. Kim, "Study for Operation Teaching Machine Using 3D Virtual Reality System," Journal of Digital Contents Society, Vol. 17, No. 4, pp. 287-293, 2016. https://doi.org/10.9728/dcs.2016.17.4.287
  4. W. J. Choi, D. H. Kim, "Making Human Phantom for X-ray Practice with 3D Printing," Journal of the Korea Society of Radiology, Vol. 11, No. 5, pp. 370-377, 2017.
  5. Y. H. Seoung, "Evaluation of Image Uniformity and Radiolucency for Computed Tomography Phantom Made of 3-Dimensional Printing of Fused Deposition Modeling Technology by Using Acrylonitrile Butadiene Styrene Resin," Journal of Radiological Science and Technology, Vol. 39, No. 3, pp. 337-344, 2016. https://doi.org/10.17946/JRST.2016.39.3.06
  6. Y. H. Seoung, "Comparison of Hounsfield Units by Changing in Size of Physical Area and Setting Size of Region of Interest by Using the CT Phantom Made with a 3D Printer," Journal of Radiological Science and Technology, Vol. 38, No. 4, pp. 421-427, 2015. https://doi.org/10.17946/JRST.2015.38.4.12
  7. H. S. Choi, M. R. Yu, "A Study on Educational Utilization of 3D Printing: Creative Design Model-based Class," Journal of Korean Association of Information Education, Vol. 19, No. 2, pp. 167-174, 2015. https://doi.org/10.14352/jkaie.2015.19.2.167
  8. H. J. So, J. H. Lee, B. K. Kye, "An Exploratory Study about the Activity Framework for 3D Printing in Education and Implementation," Journal of Korean Association of Information Education, Vol. 21, No. 4, pp. 451-462, 2017. https://doi.org/10.14352/jkaie.2017.21.4.451
  9. I. H. Lee, J. M. Shin, H. Y. Cho, "Design and Operation of 3D Printing Education Curriculum in Mechanical Engineering," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 3, pp. 21-26, 2015. https://doi.org/10.14775/ksmpe.2015.14.3.021
  10. https://www.thingiverse.com/
  11. https://www.myminifactory.com/
  12. https://www.stlfinder.com/
  13. J. P. Kruth, M. C. Leu, T. Nakagawa, "Progress in Additive Manufacturing and Rapid Prototyping," CIRP Annals, Vol. 47, No. 2, pp. 525-540, 1988.
  14. Y. H. Seoung, "A Study of 3D Printing of Self-Customization Cast by Using Fused Deposition Modeling Technique of ABS Resin," Journal of the Korea Aca demia-Industrial cooperation Society, Vol. 16, No. 9, pp. 6019-6026, 2015. https://doi.org/10.5762/KAIS.2015.16.9.6019
  15. Y. H. Seoung, "3-Dimension Printing for Mesh Types of Short Arm Cast by Using Computed Tomography," Journal of Contents Association, Vol. 15, No. 1, pp. 308-315, 2015. https://doi.org/10.5392/JKCA.2015.15.01.308
  16. W. K. Oh, "Evaluation of Usefulness and Availability for Orthopedic Surgery using Clavicle Fracture Model Manufactured by Desktop 3D Printer," Journal of Radiological Science and Technology, Vol. 37, N o. 3, pp. 203-209, 2014.

Cited by

  1. 3D 프린팅 구조물을 이용한 자기주도 학습방법이 방사선학과 학생들에 미치는 교육 효과 vol.14, pp.1, 2018, https://doi.org/10.7742/jksr.2019.14.1.45