DOI QR코드

DOI QR Code

E-Mobility용 전력변환기의 IoT 모니터링 기술에 대한 연구

A Study on IoT Monitering Technology of Power Converter for E-Mobility

  • 이인석 (한양대학교 전기공학과) ;
  • 이주 (한양대학교 전기공학과) ;
  • 강자윤 (한양대학교 메카트로닉스공학과)
  • Lee, In-Seok (Department of Electrical Engineering Hanyang University) ;
  • Lee, Ju (Department of Electrical Engineering Hanyang University) ;
  • Kang, Ja-Yoon (Department of Mechatronics Engineering, Hanyang University)
  • 투고 : 2018.02.01
  • 심사 : 2018.03.20
  • 발행 : 2018.03.28

초록

논문은 E-Mobility용 전력변환기의 고장 진단을 위해 차량 상태의 모니터링 기술을 IoT 기술을 접목하여 스마트폰으로 연동하여 운용하는 것에 대한 것이다. 중국에서는 EV 규제를 실시하여 기술의 발전과 전기자동차에 대한 시장 변화를 유도하고 있다. 이러한 추세에 맞게 E-Mobility도 적합한 모니터링 기술을 연구해야 한다. 기존 자동차에서 적용하는 OBD-II를 이용한 방법은 유무선 통신 방법이다. E-Mobility에 적용하기 위해서는 추가의 인터페이스 및 통신연동이 필요하다. 본 논문에서는 기존 기술과 IoT를 접목시켜 E-Mobility용 전력변환기의 상태정보를 모니터링 하는 기술을 제안하였다. 이 기술을 통해서 기존 네트워크 프로토콜 및 하드웨어 인터페이스를 간소화 하였고, 사용자가 쉽게 모니터링 할 수 있도록 E-Mobility용 전력변환기와 스마트폰의 연동이 가능함을 확인하였다. 그리고 기능 측면에서 고부가가치 제품 설계가 되도록 연구를 수행하였다.

In this paper, we propose a monitoring method of smartphone to integrate IoT technology to monitor the state of the vehicle for fault diagnosis of E-Mobility power converter. In China, EV regulations are being implemented to promote technological development and market changes in electric vehicles. To meet this trend, E-Mobility should study suitable monitoring technology. The OBD-II method used in existing automobiles is a wired / wireless communication method. In order to apply it to E-Mobility, additional interface and communication link are required. In this paper, we propose a technology to monitor the status information of power converter for E-Mobility by combining existing technology with IoT. This technology simplifies the existing network protocol and hardware interface, and confirms that the E-Mobility power converter and smartphone can be interworked for easy user monitoring. And we have done research to make high value product design from the aspect of function.

키워드

참고문헌

  1. H. S. Ryoo, Y. W. Won & K. C. Park, (2011). Research on Communication and The Operating of Server System for Vehicle Diagnosis and Monitoring, The Institute of Electronics Engineers of Korea - Telecommunications, 48(6), 41-50,
  2. H. S. C.hoi, S. Y. Lee, C. D, Lee & S. H. Park (2011). A Gathering System for Vehicle Information, Proceedings of Symposium of the Korean Institute of communications and Information Sciences, 599-600.
  3. K. Y Kang, K. B. Lee & Y. C. Kim, (2013). Wind Turbine Condition Monitoring System based on Android OS using ZigBee and Bluetooth, 2013 IEEK SUMMER CONFERENCE, 1400-1403.
  4. H. C. Myoung, D. H. Park & J. H. Kim, (2002). Development of Inverter Monitoring system, KIEE 2002, 1049-1051.
  5. Y. S. Song, W. K. Han, J. S. Jung, H. S. Lim & S. K. Cho, (2015). A Study on Installation of Monitoring System of Wireless Power Transmission System, Journal of the Korean Institute of Illuminating and Electrical Installation Engineers, 29(4), 47-53. DOI:10.5207/JIEIE.2015.29.4.047
  6. J. Y. Hwang, S. I. Chung & Y. H. Chung, (2011). Development of Vehicle Motion Monitoring Module based on Smartphone, Journal of the Korea Institute of Information and Communication Engineering, 15(9), 1903-1909. https://doi.org/10.6109/jkiice.2011.15.9.1903
  7. D. J. Kim, J. G. Shon, & H. J. Jeon, (2012). A development of Diagnosis Monitoring System for UPS DC Link Capacitors using Zigbee Wireless Communication, THE TRANSACTION OF THE KOREAN INSTITUTE OF ELECTRICAL ENGINEERS 61(1), 41-46. https://doi.org/10.5370/KIEE.2012.61.1.041
  8. I. K. Lee, S. S. Kim, J. C. Jang, K. J. Kim, K. A. Kim, T. S. Lee & E. J. Cha, (2008). Zigbee Based Wireless Respiration Monitor System, The transactions of The Korean Institute of Electrical Engineers, 57(1), 142-147.
  9. H. W. Je & O. Yang, (2012). Remote Monitoring System of Photovoltaic Inverter using Zigbee Communication, Journal of Korean Institute of Information Technology, 10(21), 94-101.
  10. P. S. Ji, J. P. Lee, D. J. Lee, S. J. Byeon & J. Y. Lim, (2011). Monitering System for Solar Cell of Photovoltaic Power Generation Using Zigbee Technique, KIEE 2011, 64-67.
  11. B. W. Park & S. J. Park, (2017). The development of a integrated solar power plant monitoring system using the Zigbee communication, Journal of the Korean Institute of Illuminating and Electrical Installation Engineers, 31(7), 56-62. DOI : 10.5207/JIEIE.2017.31.7.056
  12. D. S. Moon & S. H. Kim, (2012). Development of Wireless Remote Monitoring System for Small Wind Turbine System, Journal of Korean Institute of Intelligent Systems, 22(4), 460-467. DOI : 10.5391/JKIIS.2012.22.4.460
  13. C. H. Yu (2015) Development of the Vehicle Diagnosis Program using the OBD-II and CAN Data Analysis, Doctoral dissertation, Suwon University, Suwon
  14. J. B. Lee & S. S. Lee, (2017). Design and Verification of Automotive CAN Controller, Journal of IKEEE, 21(2), 162-165. DOI : 10.7471/IKEEE.2017.21.2.162
  15. J. A. Yun, S. W. Nam, K. W. Kim & S. Lee, (1997). Evaluation of Network Protocols for Automotive Data Communication, Journal of Institute of Control, Robotics and Systems, 3(6), 632-638.