DOI QR코드

DOI QR Code

A virtual shaker testing experience: Modeling, computational methodology and preliminary results

  • 투고 : 2016.12.20
  • 심사 : 2017.09.09
  • 발행 : 2018.03.25

초록

This work illustrates the progress of a TAS activity at exploring the challenges and the benefits of the Virtual Shaker Testing (VST) approach. The definition and the validation of new computational methodologies with respect to the state of the art were encouraged throughout this activity. The shaker Finite Element (FE) model in lateral configuration was built for the purpose and it was merged with the SpaceCraft (S/C) FE model, together with the S/C-Shaker adapter. FE matrices were reduced through the Craig-Bampton method. The VST transient analysis was performed in MATLAB(R) numerical computing environment. The closed-loop vibration control is accounted for and the solution is obtained through the fourth-order Runge Kutta method. The use of pre-existing built-in functions was limited by authors with the aim of tracing the impact of all the problems' parameters in the solution. Assumptions and limitations of the proposed methodology are detailed throughout this paper. Some preliminary results pertaining to the current progress of the activity are thus illustrated before the conclusions.

키워드

과제정보

연구 과제 주관 기관 : ESTEC

참고문헌

  1. Apolloni, M. and Cozzani, M. (2007), "Virtual testing simulation tool for the new quad head expander electrodynamic shaker", Proceedings of the 6th Int. Symp. on Environmental Testing for Space Programmes, ESA-ESTEC, Noordwijk, The Netherlands, June.
  2. Craig, R.R. (1981), Structural Dynamics, An Introduction to Computer Methods, John Wiley & Sons.
  3. Di Pietro, V. and Ladisa, P. (2016), "Multiaxial Shaker: Virtual simulation, testing and improvements", Proceedings of the MSC'S Simulation and Analysis Conference, Napoli, Italy, July.
  4. ESA-ESTEC/European Cooperation for Space Standardization (2013), Space Engineering, Spacecraft Mechanical Loads Analysis Handbook, ECSS-E-HB-32-26A, Noordwijk, The Netherlands.
  5. Lollock, J.A. (2002), "The effect of a swept sinusoidal excitation on the response of a single-degree-offreedom oscillator", Proceedings of the 43rd AIAA Structures, Structural Dynamics and Materials Conference, Denver, Colorado, March.
  6. Nali, P. and Bettacchioli, A. (2016), "Beating phenomena in spacecraft sine tests and an attempt to include the sine sweep rate effect in the test-prediction", Adv. Aircr. Spacecr. Sci., 3(2).
  7. Ricci, S., Peeters, B., Debille, J., Britte, L. and Faignet, E. (2008), "Virtual shaker testing: A novel approach for improving vibration test performance", Proceedings of the ISMA 2008 International Conference on Noise and Vibration Engineering, Leuven, Belgium, September.
  8. Ricci, S., Peeters, B., Fetter, R., Boland, D. and Debille, J. (2009), "Virtual shaker testing for predicting and improving vibration test performance", Proceedings of the IMAC 2009, Orlando (FL), U.S.A., February.
  9. Roy, N. and Girard, A. (2012), "Revisiting the effect of sine sweep rate on modal identification", Proceedings of the European Conference on Spacecraft Structures, Materials and Environmental Testing, Noordwijk, The Netherlands, March.
  10. Waimer, S., Manzato, S., Peeters, B., Wagner, M. and Guillaume, P. (2015a), "Experimental system identification of an electrodynamic shaker for virtual shaker testing", Proceedings of the ICEDyn, International Conference on Structural Engineering Dynamics, Lagos, Portugal, June.
  11. Waimer, S., Manzato, S., Peeters, B., Wagner, M. and Guillaume, P. (2015b), "Derivation and implementation of an electrodynamic shaker model for virtual shaker testing based on experimental data", Proceedings of the 29th Aerospace Testing Seminar, Los Angeles (CA), U.S.A., October.