Elastomers and Composites

The Rubber Society of Korea (한국고무학회)
권호 표지
DOI QR코드

DOI QR Code

No-binding Molding Technology Development for Waste Rubber Recycling

  • Zhang, Xiao Jie (Elastomer Lab., Department of Materials Engineering and Convergence Technology, Gyeongsang University) ;
  • Hong, Sung Woo (Elastomer Lab., Department of Materials Engineering and Convergence Technology, Gyeongsang University) ;
  • Kim, Jin Kuk (Elastomer Lab., Department of Materials Engineering and Convergence Technology, Gyeongsang University)
  • Received : 2018.01.18
  • Accepted : 2018.01.25
  • Published : 2018.03.31
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, a new process was developed to develop the waste rubber material recycling system. Firstly, the blending of the reclaimed rubber/virgin rubber as a compounding technology was investigated in this study. Secondly, the removal of odor by using zeolite. Thirdly, the continuous crosslinking process technology was studied the technology can solve the environmentally harmful substances and economic problems. Based on this technology, we have started to develop application technologies such as floor mats and rubber sheets for forklifts, and will further study the environmentally conscious products in various ways. Our research will contribute to the recycling industry.

Keywords

References

  1. G. J. Lee, "Development of natural rubber production technology", Tire & Rubber, 105, 36 (1983).
  2. W. J. Shin, "Environment and rubber industry", Tire & Rubber, 67, 12 (1976).
  3. J. K. Kim, H. K. Lee, and S. H. Hwang, "Studies on recycling of waste polyurethane(II)", Elastomer, 35, 227 (2000).
  4. S. H. Lee, S. H. Hwang, J. H. Jung, and J. K. Kim, "Development of New Technology of the Waste Rubber Recycling", Korea Institute of Resources Recycling Proceedings of 2003 Annual General Meeting and Symposium Oct. 15, Gong-ju, 225 (2003).
  5. Y. S. Lee, K. W. Kim, H. S. Jeon, and S. I. Lee, "Major international environmental regulation trends in the automobile industry", Rubber Technology, 13, 107 (2012).
  6. J. S. Kim, "자동차용(自動車用) 고무부품(部品)", Elast. Compos., 15, 38 (1980).
  7. J. K. Kim, J. C. Suh, and J. S. Oh, "Floor Noise Isolation System of the Residential Buildings Using Waste Rubbers", Applied Chemistry for Engineering, 28, 427 (2017).
  8. J. K. Kim, "Review of waste rubber recyclability", Elast. Compos., 30, 335 (1995).
  9. D. H. Jang and Y. J. Kim, "Recycling of reclaimed EPDM rubber for method study", Spring Conference, 춘계, 1 (2009).
  10. J. Y. Lee, "Status of waste rubber recycling technology", Prospectives of Industrial Chemistry, 10, 43 (2007).
  11. J. K. Kim, S. H. Hwang, and S. H. Lee, "A study on recycling treatment method by using waste rubber", Proceedings of the Korean Institute of Resources Recycling Conference, 2001 Special Lecture and Spring Lecture Presentation (1), 춘계, 345 (2001).