DOI QR코드

DOI QR Code

Development of Torque Sensor for Measurement of Knee Joint Torque of Walking Assist Robot in Stroke Patients

뇌졸중환자 보행보조로봇의 무릎관절 토크측정을 위한 토크센서 개발

  • Park, Jeong-Hyeon (Department of Intelligent Mechatronics Engineering, Gyeongsang National Unversity) ;
  • Kim, Gab-Soon (Department of Control & Instrumentation Engineering, ERI, Gyeongsang National Unversity)
  • 박정현 (경상대학교 지능형메카트로닉스공학과) ;
  • 김갑순 (경상대학교 제어계측공학과)
  • Received : 2018.01.09
  • Accepted : 2018.03.17
  • Published : 2018.03.31

Abstract

In this paper, a torque sensor is designed and fabricated to measure the knee joint torque of a walking assist robot for stroke patients. The torque sensor sensing part was modeled on the link of the part connected to the knee joint motor. The torque capacity of the knee joint was calculated by simulation and the size of the torque sensor sensing part was designed using the finite element method. The torque sensor was fabricated by attaching a strain gauge to the sensing part. Characteristic experiments were conducted to characterize the torque sensor, and the torque sensor was calibrated to utilize it for the control of the walking assist robot. As a result of the characteristics test, the reproducibility error and the nonlinearity error of the torque sensor were 0.03% and 0.04%, respectively. Therefore, it is considered that the developed torque sensor can be used to measure the torque applied to the knee joint when walking on a walking assist robot.

Keywords

References

  1. M. Wu, T.G. Hornby, J.M. Landry, H. Roth and B.D. Schmit, "A Cable-driven Locomotor Training System for Restoration of Gait in Human SCI," Gait & Posture, (33), pp. 256-260, 2011.
  2. M.M. Martins, C.P. Santos, F.N. Anselmo and R. Ceres, "Assistive Mobility Devices Focusing on Smart Walkers: Classification and review," Robotics and Autonomous Systems, (60), pp. 548-562, 2012.
  3. T. Wanga, J.P. Merlet, G. Sacco, P. Robert, J.M. Turpin, B. Teboul, A. Marteub and O. Guerin, "Walking analysis of young and elderly people by using an intelligent walker ANG," Robotics and Autonomous Systems, Vol. 75, pp. 96-106, 2016. https://doi.org/10.1016/j.robot.2014.09.019
  4. H. Terada, Y. Zhu, M. Suzuki, C. Cheng and R. Takahashi, "Developments of a Knee Motion Assist Mechanism for Wearable Robot with a Non-circular Gear and Grooved Cams," Mechanisms, Transmissions and Applications, Vol. 3, pp. 69-76, 2011.
  5. S. Kubota, Y. Nakata, K. Eguchi, H. Kawamoto, K. Kamibayashi, M. Sakane, Y. Sankai and N. Ochiai, "Feasibility of Rehabilitation Training With a Newly Developed Wearable Robot for Patients With Limited Mobility," Archives of Physical Medicine and Rehabilitation, Vol. 94, pp. 1080-1087, 2013. https://doi.org/10.1016/j.apmr.2012.12.020
  6. M. Aach, O. Cruciger, R.C. Meindl, M. Tegenthoff, P. Schwenkreis, Y. Sankai and T.A. Schildhauer, "Voluntary driven exoskeleton as a new tool for rehabilitation in chronic spinal cord injury: a pilot study," The Spine Journal, vol. 14, pp. 2847-2853, 2014. https://doi.org/10.1016/j.spinee.2014.03.042
  7. H. Watanabe, N. Tanaka, T. Inuta, H. Saitou and H. Yanagi, "Locomotion Improvement Using a Hybrid Assistive Limb in Recovery Phase Stroke Patients: A Randomized Controlled Pilot Study," Archives of Physical Medicine and Rehabilitation, Vol. 95, pp. 2006-12, 2014. https://doi.org/10.1016/j.apmr.2014.07.002
  8. N. Karavas, A. Ajoudani, N. Tsagarakis, J. Saglia, A. Bicchi and D. Caldwell, "Tele-impedance based assistive control for a compliant knee exoskeleton," Robotics and Autonomous Systems, Vol. 73, pp. 78-90, 2015. https://doi.org/10.1016/j.robot.2014.09.027
  9. J.F. Zhang, Y.M. Dong, C.J. Yang, Y. Geng, Y. Chen and T. Yang, "5-Link model based gait trajrctory adaption control strategies of the gait rehabilitation exoskeleton for poststroke patients," Mechatronics, Vol. 20(3), pp. 368-376, 2010. https://doi.org/10.1016/j.mechatronics.2010.02.003
  10. V. Rajasekaran, J. Aranda, A. Casals and J.L. Pons, "An adaptive control strategy for postural stability using a wearable robot," Robotics and Autonomous Systems, Vol. 73, pp. 16-23, 2015. https://doi.org/10.1016/j.robot.2014.11.014
  11. A. Pennycott, K.J. Hunt, L.P. Jack, C. Perret and T.h. Kakebeeke, "Estimation and volitional feedback control of active work rate during robot-assisted gait," Control Engineering Pracrice, (17), pp. 322-328, 2009.
  12. S. A. Liu and H. L. Tzo, "A novel six-component force sensor of good measurement isotropy and sensitivities," Sensors and Actuators A, Vol. 100, pp. 223-230, 2002. https://doi.org/10.1016/S0924-4247(02)00135-8
  13. H.S. Kim and G.S. Kim, "Design of Two-axis Force/Torque Sensor for Hip Joint Rehabilitation Robot," Journal of Institute of Control, Robotics and Systems (in Korean), Vol. 22(7), pp. 524-529, 2016. https://doi.org/10.5302/J.ICROS.2016.16.0067
  14. A. Song, J. Wu, G. Qin, and W. Huang, "A novel selfdecoupled four degree-of-freedom wrist force/torque sensor," Measurement, Vol. 40, pp. 883-891, 2007. https://doi.org/10.1016/j.measurement.2006.11.018
  15. J.H. Jung and G.S. Kim, "Design of Force Sensors of Rehabilitation Robot for Knee Rehabilitation," Journal of Institute of Control, Robotics and Systems (in Korean), Vol. 23(1), pp. 46-52, 2017. https://doi.org/10.5302/J.ICROS.2017.16.0176
  16. ATI Industrial Automation, "Multi-axis forcre/torque sensor," ATI Industrial Automation, pp. 4-45, 2014.
  17. H.S. Kim and G.S. Kim, "Development of Calf Link Force Sensors of Walking Assist Robot for Leg Patients," Journal of Sensor Science and Technology, Vol. 26(2), pp. 114-121, 2017. https://doi.org/10.5369/JSST.2017.26.2.114
  18. J.H. Joung and G.S. Kim, "Design of a Force Sensor for Thigh Force Measurement of a Wearable Walking Robot," Korean Society Precision Engineering, Vol. 34(10), pp. 705-711, 2017.
  19. G. S. Kim and J. W. Yoon, "Development of calibration system for multi-axis force/moment sensor and its uncertainty evaluation," Korean Society Precision Engineering, Vol. 24(10), pp. 91-98, 2007.