Journal of the Korean Crystal Growth and Crystal Technology (한국결정성장학회지)

The Korea Association of Crystal Growth (한국결정성장학회)
권호 표지
DOI QR코드

DOI QR Code

Corelation between crystalline phase and corrosion resistance of Mg alloy with different PEO conditions. II. Corrosion resistance

Mg 합금의 PEO 공정 조건에 따른 산화피막 결정상과 내부식성에 대한 연구 II. 내부식성

  • Received : 2018.02.23
  • Accepted : 2018.03.22
  • Published : 2018.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

Mg alloys AZ31 and AZ91 were Plasma-Electrolytic-Oxidized in Na-P and Na-Si system electrolyte at various concentration, applied voltage and time. Thickness and surface roughness of PEO coating were examined. Salt spraying test were carried out to compare their corrosion resistances. Generally, corrosion resistances rate were increased as thickness and crystallinity increasing. Size of pore being larger, long term corrosion resistance decreased. It is turned out that $Mg_2SiO_4$ and other crystalline phase rather than MgO might be increase corrosion resistance dramatically.

AZ31과 AZ91 Mg 합금을 Na-P 및 Na-Si 전해질을 사용하여 전해질의 농도, 인가전압, 처리시간에 따라 여러가지 조건에서 PEO 처리하여 5%의 농도를 갖는 염수분무법으로 내부식성 연구를 하였다. 일반적으로 산화피막 코팅 두께가 증가하면 내부식성이 증가하였다. 코팅두께보다 산화피막 표면의 기공크기가 커지면 장기 내부식성은 나빠지는 경향을 보인다. 산화피막의 전체적인 산화물 결정상이 증가할수록, 또 MgO 결정상 대신 $Mg_2SiO_4$ 상과 같은 다른 결정상이 증가할수록 내부식성이 월등히 증가하는 것을 알 수 있었다.

Keywords

References

  1. B.L. Mordike and T. Ebert, "Magnesium: Propertiesapplications-potential", Materials Science and Engineering A302 (2001) 37.
  2. G.L. Song and A. Atrens, "Corrosion mechanisms of magnesium alloys", Advanced Engineering Materials 1 (1999) 11. https://doi.org/10.1002/(SICI)1527-2648(199909)1:1<11::AID-ADEM11>3.0.CO;2-N
  3. Y.-L. Cheng, T.-W. Qin, H.-M. Wang and Z. Zhang, "Comparison of corrosion behaviors of AZ31, AZ91, AM60 and ZK60 magnesium alloys", Trans. Nonferrous Met. Soc. China 19 (2009) 517. https://doi.org/10.1016/S1003-6326(08)60305-2
  4. H.F. Guo and M.Z. An, "Effect of surfactants on surface morphology of ceramic coatings fabricated on magnesium alloys by micro-arc oxidation", Thin Solid Films 500 (2006) 186. https://doi.org/10.1016/j.tsf.2005.11.045
  5. Y. Ma, X. Nie, D.O. Northwood and H. Hu, "Systematic study of the electrolytic plasma oxidation process on a Mg alloy for corrosion protection", Thin Solid Films 494 (2006) 296. https://doi.org/10.1016/j.tsf.2005.08.156
  6. B.Y. Kim, J.H. Ham, D.Y. Lee, M.-S. Jeon, Y.-N. Kim, K.-Y. Kim, J.-W. Choi, S.Y. Kim and K.Y. Kim, "Effect of process conditions on crystal structure of Al PEO coating. I. Unipolar and coating time", J. Korean Cryst. Growth Cryst. Technol. 24 (2014) 59. https://doi.org/10.6111/JKCGCT.2014.24.2.059
  7. B.Y. Kim, J.H. Ham, D.Y. Lee, M.-S. Jeon, Y.-N. Kim, K.-Y. Kim, J.-W. Choi, S.Y. Kim and K.Y. Kim, "Effect of process conditions on crystal structure of Al PEO coating. II. Bipolar and electrolyte", J. Korean Cryst. Growth Cryst. Technol. 24 (2014) 65. https://doi.org/10.6111/JKCGCT.2014.24.2.065
  8. Y. Gao, A. Yerokhin and A. Matthews, "DC plasma electrolytic oxidation of biodegradable cp-Mg: In-vitro corrosion studies", Surface & Coatings Technol. 234 (2013) 132. https://doi.org/10.1016/j.surfcoat.2012.11.035
  9. G. Lv, H. Chen, X. Wang, H. Pang, G. Zhang, B. Zou, H. Lee and S. Yang, "Effect of additives on structure and corrosion resistance of plasma electrolytic oxidation coatings on AZ91D magnesium alloy in phosphate based electrolyte", Surface & Coatings Technol. 205 (2010) S36. https://doi.org/10.1016/j.surfcoat.2010.03.035
  10. S. Wang, Y. Xia, L. Liu and N. Si, "Preparation and performance of MAO coatings obtained on AZ91D Mg alloy under unipolar and bipolar modes in a novel dual electrolyte", Ceramics International 40 (2014) 93. https://doi.org/10.1016/j.ceramint.2013.05.108
  11. H. Wang, Z.H. Chen and L.L. Li, "Corrosion resistance and microstructure characteristics of plasma electrolytic oxidation coatings formed on AZ31 magnesium alloy", Surface Eng. 26 (2010) 385. https://doi.org/10.1179/026708410X12506873242822
  12. R. Arrabal, E. Matykina, F. Viejo, P. Skeldon and G.E Thompson, "Corrosion resistance of WE43 and AZ91D magnesium alloys with Phosphate PEO coatings", Corrosion Sci. 50 (2008) 1744. https://doi.org/10.1016/j.corsci.2008.03.002
  13. Y. Mori, A. Koshi, J. Liao, H. Asoh and S. Ono, "Characteristics and corrosion resistance of plasma electrolytic oxidation coatings on AZ31B Mg alloy formed in phosphate - Silicate mixture electrolytes", Corrosion Sci. 88 (2014) 254. https://doi.org/10.1016/j.corsci.2014.07.038
  14. Z.P. Yao, D.L. Wang, Q.X. Xia, Y.J. Zhang, Z.H. Jiang and F.P. Wang, "Effect of PEO power modes on structure and corrosion resistance of ceramic coatings on AZ91D Mg alloy", Surface Eng. 28 (2012) 96. https://doi.org/10.1179/1743294411Y.0000000045
  15. A.L. Yerokhin, X. Nie, A. Leyland, A. Matthews and S.J. Dowey, "Plasma electrolysis for surface engineering", Surface and Coating Technol. 122 (1999) 73. https://doi.org/10.1016/S0257-8972(99)00441-7
  16. H.F. Guo and M.Z. An, "Growth of ceramic coatings on AZ91D magnesium alloys by micro-arc oxidation in aluminate-fluoride solutions and evaluation of corrosion resistance", Appl. Surface Sci. 246 (2005) 229. https://doi.org/10.1016/j.apsusc.2004.11.031