DOI QR코드

DOI QR Code

Factor of Safety of Local Instability in Soil Nail Slopes

쏘일네일이 보강된 사면의 국부파괴에 대한 안전율 분석

  • Received : 2017.12.08
  • Accepted : 2018.03.22
  • Published : 2018.06.01

Abstract

In this study, a soil nail design method for a stability analysis of local instability with nail reinforced slope was proposed. The failure mechanism of a local instability of slope was studied and a theoretical equation to estimate the stability of slope was developed. Using the developed equation, the stability analysis was performed according to installation conditions of soil nail such as a slope inclination, a thickness of soil layer, a nail inclination, and a nail spacing. Considering those design factors, a sensitivity analysis for each influence factors was conducted. Analysis results showed that the safety factor of reinforced slope with nail was higher than the slope without nail. In addition, the safety factor of slope according to ground condition was increased in the order of dry, saturated, and seepage condition.

본 연구에서는 네일 보강설계에 따른 국부 쐐기파괴의 안정성 검토가 가능한 네일 설계방법을 제안하기 위해, 국부 쐐기파괴에 대한 파괴 메커니즘을 확인하고 이에 대한 안전율 산정식을 개발하였다. 개발된 이론식을 이용하여 네일 보강여부, 지반조건, 네일 보강설치 패턴을 변화시켜 가면서 해석을 수행하였다. 또한 이를 바탕으로 각 영향요소에 대한 민감도 분석을 실시하였다. 해석 및 분석결과, 네일로 보강된 비탈면의 경우 무보강 비탈면 보다 안전율이 설계기준 이상으로 증가하였으며, 지반조건에 따른 비탈면의 안전율은 건기 시, 우기 시, 우기 시의 침투조건 순으로 증가하였다.

Keywords

References

  1. British Standard (2011). Code of practice for strengthened/reinforced soils, BSI Standards Publication, Part 2 : Soil nail design, UK.
  2. Bucher, R., Wendeler, C. and Baraniak, P. (2016). "New results of large-scale testing of high-tensile steel meshes and soil nails for slope stabilisation and validation of modelling software." Proceedings of the First Asia Pacific Slope Stability in Mining Conference, Perth, Australia, pp. 709-720.
  3. Dutta, L. and Singha, G. (2016). "Rock slope stabilization : a case study of a weathered sandstone slope along the railway in Bavaria, Germany." Recent advances in rock engineering, RARE, India, pp. 64-68.
  4. Fan, C. C. and Luo, J. H. (2008). "Numerical study on the optimum layout of soil-nailed slopes." Journal of Computers and Geotechnics, Vol. 35, No. 4, pp. 585-599. https://doi.org/10.1016/j.compgeo.2007.09.002
  5. Federal Highway Administration (2015). Soil nail wall-reference manual, FHWA GEC 7, Publication No. FHWA-NHI-14-007, U.S. Department of Transportation Federal Highway Administration.
  6. Geotechnical Engineering Office (2008). Guide to soil nail design and construction, Geoguide 7, Hong Kong.
  7. Highways Agency 68/94 (1994). Design methods for the reinforcement of highway slopes by reinforced soil and soil nailing techniques, Volume 4, Section 1, UK.
  8. Korea Expressway Corporation (2012, 2017). Slope Technical Advisory Report (in Korean).
  9. Ministry of Land, Transport and Maritime Affairs (MLTMA) (2009). Construction slope design standard.
  10. Ministry of Land, Transport and Maritime Affairs (MLTMA) (2011). Construction slope design standard.
  11. Ministry of Land, Transport and Maritime Affairs (MLTMA) (2012). Road design Manual.
  12. Wei, W. B. and Cheng, Y. M. (2010). "Soil nailed slope by strength reduction and limit equilibrium methods." Journal of Computers and Geotechnics, Vol. 37, No. 5, pp. 602-618. https://doi.org/10.1016/j.compgeo.2010.03.008
  13. Wendeler, C. and Luis, R. (2017). "High-tensile steel meshes used in slope stabilization system, tested in first large scale field test application." Proceedings of the 19th International Conference on Soil Mechanics and Geotechnical Engineering, Seoul 2017.
  14. You, K. H., Jung, Y. H. and Ha, J. Y. (2015). "Applicability study of geotextile mesh soil nail on slope reinforcement using numerical analysis." Journal of Korean Tunnelling and Underground Space, Vol. 25, No. 3, pp. 264-274 (in Korean). https://doi.org/10.7474/TUS.2015.25.3.264
  15. Zhou, W. H. and Yin, J. H. (2008). "A simple mathematical model for soil nail and soil interaction analysis." Journal of Computers and Geotechnics, Vol. 35, No. 3, pp. 479-488. https://doi.org/10.1016/j.compgeo.2007.07.001