DOI QR코드

DOI QR Code

Quasi-3D static analysis of two-directional functionally graded circular plates

  • Wu, Chih-Ping (Department of Civil Engineering, National Cheng Kung University) ;
  • Yu, Lu-Ting (Department of Civil Engineering, National Cheng Kung University)
  • 투고 : 2018.01.25
  • 심사 : 2018.04.06
  • 발행 : 2018.06.25

초록

A weak-form formulation of finite annular prism methods (FAPM) based on Reissner's mixed variational theorem (RMVT), is developed for the quasi three-dimensional (3D) static analysis of two-directional functionally graded (FG) circular plates with various boundary conditions and under mechanical loads. The material properties of the circular plate are assumed to obey either a two-directional power-law distribution of the volume fractions of the constituents through the radial-thickness surface or an exponential function distribution varying doubly exponentially through it. These FAPM solutions of the loaded FG circular plates with both simply-supported and clamped edges are in excellent agreement with the solutions obtained using the 3D analytical approach and two-dimensional advanced plate theories available in the literature.

키워드

과제정보

연구 과제 주관 기관 : Ministry of Science and Technology of the Republic of China

참고문헌

  1. Abdelaziz, H.H., Meziane, M.A.A., Bousahla, A.A., Tounsi, A., Mahmoud, S.R. and Alwabli, A.S. (2017), "An efficient hyperbolic shear deformation theory for bending, buckling and free vibration of FGM sandwich plates with various boundary conditions", Steel Compos. Struct., Int. J., 25(6), 693-704.
  2. Benchohra, M., Driz, H., Bakora, A., Tounsi, A., Bedia, E.A.A. and Mahmoud, S.R. (2018), "A new quasi-3D sinusoidal shear deformation theory for functionally graded plates", Struct. Eng. Mech., Int. J., 65(1), 19-31.
  3. Bouchafa, A., Bouiadjra, M.B., Houari, M.S.A. and Tounsi, A. (2015), "Thermal stresses and deflections of functionally graded sandwich plates using a new refined hyperbolic shear deformation theory", Steel Compos. Struct., Int. J., 18(6), 1493-1515. https://doi.org/10.12989/scs.2015.18.6.1493
  4. Bouderba, B., Houari, M.S.A., Tounsi, A. and Mahmoud, S.R. (2016), "Thermal stability of functionally graded sandwich plates using a simple shear deformation theory", Struct. Eng. Mech., Int. J., 58(3), 397-422. https://doi.org/10.12989/sem.2016.58.3.397
  5. Carrera, E. and Brischetto, S. (2009), "A survey with numerical assessment of classical and refined theories for the analysis of sandwich plates", Appl. Mech. Rev., 62(1), 010803. (17 pages) https://doi.org/10.1115/1.3013824
  6. Elmossouess, B., Kebdani, S., Bouiadjra, M.B. and Tounsi, A. (2017), "A novel and simple HSDT for thermal buckling response of functionally graded sandwich plates", Struct. Eng. Mech., Int. J., 62(4), 401-415. https://doi.org/10.12989/sem.2017.62.4.401
  7. Hachemi, H., Kaci, A., Houari, M.S.A., Bourada, M., Tounsi, A. and Mahmoud, S.R. (2017), "A new simple three-unknown shear deformation theory for bending analysis of FG plates resting on elastic foundations", Steel Compos. Struct., Int. J., 25(6), 717-726.
  8. Houari, M.S.A., Tounsi, A., Bessaim, A. and Mahmoud, S.R. (2016), "A new simple three-unknown sinusoidal shear deformation theory for functionally graded plates", Steel Compos. Struct., Int. J., 22(2), 257-276. https://doi.org/10.12989/scs.2016.22.2.257
  9. Jabbari, M., Shahryari, E., Haghighat, H. and Eslami, M.R. (2014), "An analytical solution for steady state three dimensional thermoelasticity of functionally graded circular plates due to axisymmetric loads", Eur. J. Mech. A-Solids, 47, 124-142. https://doi.org/10.1016/j.euromechsol.2014.02.017
  10. Koizumi, M. (1997), "FGM activities in Japan", Compos. Part B-Eng., 28(1-2), 1-4. https://doi.org/10.1016/S1359-8368(96)00016-9
  11. Li, X.Y., Li, P.D. and Kang, G.Z. (2012), "Axisymmetric thermoelasticity field in a functionally graded circular plate of transversely isotropic material", Math. Mech. Solids, 18(5), 464-475. https://doi.org/10.1177/1081286512442437
  12. Liew, K.M., Lei, Z.X. and Zhang, L.W. (2015), "Mechanical analysis of functionally graded carbon nanotube reinforced composites: A review", Compos. Struct., 120, 90-97. https://doi.org/10.1016/j.compstruct.2014.09.041
  13. Miyamoto, Y., Kaysser, W.A., Rabin, B.H., Kawasaki, A. and Ford, R.G. (1999), Functionally Graded Materials: Design, Processing and Applications, Kluwer Academic, Boston, USA.
  14. Nie, G. and Zhong, Z. (2007), "Axisymmetric bending of two-directional functionally graded circular and annular plates", Acta Mech. Solida Sinica, 20(4), 289-295. https://doi.org/10.1007/s10338-007-0734-9
  15. Pendhari, S.S., Kant, T., Desai, Y. and Subbaiah, C.V. (2012), "Static solutions for functionally graded simply supported plates", Int. J. Mech. Mater. Des., 8(1), 51-69. https://doi.org/10.1007/s10999-011-9175-1
  16. Reddy, J.N., Wang, C.M. and Kitipornchai, S. (1999), "Axisymmetric bending of functionally graded circular and annular plates", Eur. J. Mech. A-Solids, 18(2), 185-199. https://doi.org/10.1016/S0997-7538(99)80011-4
  17. Sahraee, S. and Saidi, A.R. (2009), "Axisymmetric bending analysis of thick functionally graded circular plates using fourth-order shear deformation theory", Eur. J. Mech. A-Solids, 28(5), 974-984. https://doi.org/10.1016/j.euromechsol.2009.03.009
  18. Saidi, A.R., Rasouli, A. and Sahraee, S. (2009), "Axisymmetric bending and buckling analysis of thick functionally graded circular plates using unconstrained third-order shear deformation plate theory", Compos. Struct., 89(1), 110-119. https://doi.org/10.1016/j.compstruct.2008.07.003
  19. Sobhy, M. (2013), "Buckling and free vibration of exponentially graded sandwich plates resting on elastic foundations under various boundary conditions", Compos. Struct., 99, 76-87. https://doi.org/10.1016/j.compstruct.2012.11.018
  20. Sobhy, M. (2015), "Thermoelastic response of FGM plates with temperature-dependent properties resting on variable elastic foundations", Int. J. Appl. Mech., 7(6), 1550082. https://doi.org/10.1142/S1758825115500829
  21. Sobhy, M. (2016), "An accurate shear deformation theory for vibration and buckling of FGM sandwich plates in hygrothermal environment", Int. J. Mech. Sci., 110, 62-77. https://doi.org/10.1016/j.ijmecsci.2016.03.003
  22. Tahouneh, V. (2014), "Free vibration analysis of bidirectional functionally graded annular plates resting on elastic foundations using differential quadrature method", Struct. Eng. Mech., Int. J., 52(11), 663-686. https://doi.org/10.12989/sem.2014.52.4.663
  23. Tornabene, F. (2009), "Free vibration analysis of functionally graded conical, cylindrical shell and annular plate structures with a four-parameter power-law distribution", Comput. Methods Appl. Mech. Engrg., 198, 2911-2935. https://doi.org/10.1016/j.cma.2009.04.011
  24. Tornabene, F. and Viola, E. (2009a), "Free vibrations of fourparameter functionally graded parabolic panels and shells of revolution", Eur. J. Mech. A/Solids, 28, 991-1013. https://doi.org/10.1016/j.euromechsol.2009.04.005
  25. Tornabene, F. and Viola, E. (2009b), "Free vibration analysis of functionally graded panels and shells of revolution", Meccanica, 44, 255-281. https://doi.org/10.1007/s11012-008-9167-x
  26. Tornabene, F., Fantuzzi, N. and Bacciocchi, M. (2017a), "Strong and weak formulations based on differential and integral quadrature methods for the free vibration analysis of composite plates and shells: Convergence and accuracy", Eng. Ana. Bound. Elem. DOI: doi.org/10.1016/j.engana-bound.2017
  27. Tornabene, F., Fantuzzi, N. and Bacciocchi, M. (2017b), "A new doubly-curved shell element for the free vibrations of arbitrarily shaped laminated structures based on weak formulation isogeometric analysis", Compos. Struct., 171, 429-461. https://doi.org/10.1016/j.compstruct.2017.03.055
  28. Wang, Y., Xu, R.Q. and Ding, H.J. (2009), "Free axisymmetric vibration of FGM circular plates", Appl. Math. Mech., 30(9), 1077-1082. https://doi.org/10.1007/s10483-009-0901-x
  29. Wang, Y., Xu, R.Q. and Ding, H.J. (2010), "Three-dimensional solution of axisymmetric bending of functionally graded circular plates", Compos. Struct., 92(7), 1683-1693. https://doi.org/10.1016/j.compstruct.2009.12.002
  30. Wu, C.P. and Li, H.Y. (2013a), "An RMVT-based finite rectangular prism method for the 3D analysis of sandwich FGM plates with various boundary conditions", CMC-Comput. Mater. Continua, 34(1), 27-62.
  31. Wu, C.P. and Li, H.Y. (2013b), "RMVT-based finite cylindrical prism methods for multilayered functionally graded circular hollow cylinders with various boundary conditions", Compos. Struct., 100, 592-608. https://doi.org/10.1016/j.compstruct.2013.01.019
  32. Wu, C.P. and Liu, Y.C. (2016a), "A review of semi-analytical numerical methods for laminated composite and multilayered functionally graded elastic/piezoelectric plates and shells", Compos. Struct., 147, 1-15. https://doi.org/10.1016/j.compstruct.2016.03.031
  33. Wu, C.P. and Liu, Y.C. (2016b), "A state space meshless method for the 3D analysis of FGM axisymmetric circular plates", Steel Compos. Struct., 22(1), 161-182. https://doi.org/10.12989/scs.2016.22.1.161
  34. Xu, R.Q., Wang, Y. and Chen, W.Q. (2005), "Axisymmetric buckling of transversely isotropic circular and annular plates", Arch. Appl. Mech., 74(10), 692-703. https://doi.org/10.1007/s00419-005-0379-4

피인용 문헌

  1. A simple quasi-3D HSDT for the dynamics analysis of FG thick plate on elastic foundation vol.31, pp.5, 2018, https://doi.org/10.12989/scs.2019.31.5.503
  2. Vibration of angle-ply laminated composite circular and annular plates vol.34, pp.1, 2020, https://doi.org/10.12989/scs.2020.34.1.141