Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Local ratcheting behavior in notched 1045 steel plates

  • Kolasangiani, K. (Department of Mechanical Engineering, Ferdowsi University of Mashhad) ;
  • Farhangdoost, K. (Department of Mechanical Engineering, Ferdowsi University of Mashhad) ;
  • Shariati, M. (Department of Mechanical Engineering, Ferdowsi University of Mashhad) ;
  • Varvani-Farahani, A. (Department of Mechanical and Industrial Engineering, Ryerson University)
  • Received : 2017.08.01
  • Accepted : 2018.04.10
  • Published : 2018.07.10
⟨ Previous Next ⟩

Abstract

In this paper, local ratcheting behavior of 1045 steel plates with circular cutout was investigated. Experimental tests were carried out by a Zwick/Roell HB 100 servo hydraulic machine. In order to measure the local strain at notch root, a data acquisition system with strain gauge was used. Various notch diameters and distances of strain gauges mounted from the notch root were found influential in the magnitude of local ratcheting strain. It was found that the local maximum principal stress plays a crucial role in increasing the local plastic deformation. Numerical simulation was done by ABAQUS software using nonlinear isotropic/kinematic hardening model. Material parameters of hardening model were attained from several stabilized cycles of flat specimens subjected to symmetric strain cycles. The nonlinear kinematic hardening model along with the Neuber's rule was employed to assess local ratcheting at the notch root of steel plates. The results of the numerical simulations agreed closely with those measured values in this study. Both ratcheting progress and mean stress relaxation occurred simultaneously at the notch root.

Keywords

References

  1. Ahmadzadeh, G.R. and Varvani-Farahani, A. (2012), "Concurrent ratcheting-fatigue damage analysis of uniaxially loaded A-516 Gr.70 and 42CrMo Steels", Fatigue Fract. Eng. Mater. Struct., 35, 962-970. https://doi.org/10.1111/j.1460-2695.2012.01683.x
  2. Ahmadzadeh, G.R. and Varvani-Farahani, A. (2016), "A kinematic hardening rule to investigate the impact of loading path and direction on ratcheting response of steel alloys", Mech. Mater., 101, 40-49. https://doi.org/10.1016/j.mechmat.2016.07.010
  3. Armstrong, P.J. and Frederick, C.O. (1966), "A mathematical representation of the multiaxial Bauschinger effect", Report RD/B/N731, CEGB, Central Electricity Generating Board, Berkeley, CA, USA.
  4. Azadeh, M. and Taheri, F. (2015), "Computational simulation of ratcheting in dented pipes due to monotonic and cyclic axial loading", J. Strain. Anal. Eng., 50(3), 163-174. https://doi.org/10.1177/0309324714563588
  5. Chaboche, J.L. (1989), "Constitutive equations for cyclic plasticity and cyclic viscoplasticity", Int. J. Plast., 5(3), 247-302. https://doi.org/10.1016/0749-6419(89)90015-6
  6. Chen, X. and Chen, X. (2016), "Effect of local wall thinning on ratcheting behavior of pressurized $90^{\circ}$ elbow pipe under reversed bending using finite element analysis", Steel Compos. Struct., Int. J., 20(4), 931-950. https://doi.org/10.12989/scs.2016.20.4.931
  7. Chen, X., Chen, X., Chen, G. and Li, D. (2015), "Ratcheting behavior of pressurized Z2CND18.12N stainless steel pipe under different control modes", Steel Compos. Struct., Int. J., 18(1), 29-50. https://doi.org/10.12989/scs.2015.18.1.029
  8. Chen, X., Gao, B. and Chen, X. (2016), "Evaluation of AF type cyclic plasticity models in ratcheting simulation of pressurized elbow pipes under reversed bending", Steel Compos. Struct., Int. J., 21(4), 703-753. https://doi.org/10.12989/scs.2016.21.4.703
  9. Dutta, K. and Ray, K. (2012), "Ratcheting phenomenon and postratcheting tensile behaviour of an aluminum alloy", Mater. Sci. Eng., 540, 30-37. https://doi.org/10.1016/j.msea.2012.01.024
  10. Fatemi, A., Zeng, Z. and Plaseied, A. (2004), "Fatigue behavior and life predictions of notched specimens made of QT and forged microalloyed steels", Int. J. Fatigue, 26(6), 663-672. https://doi.org/10.1016/j.ijfatigue.2003.10.005
  11. Hamidinejad, S.M. and Varvani-Farahani, A. (2015), "Ratcheting assessment of steel samples under various non-proportional loading paths by means of kinematic hardening rules", Mater. Des., 85, 367-376. https://doi.org/10.1016/j.matdes.2015.06.153
  12. Huang, Z., Wang, Q., Wagner, D. and Bathias, C. (2014), "Constitutive model coupled with damage for carbon manganese steel in low cycle fatigue", Steel Compos. Struct., Int. J., 17(2), 185-198. https://doi.org/10.12989/scs.2014.17.2.185
  13. Ince, C. and Glinka, G. (2013), "A numerical method for elastoplastic notch-root stress-strain analysis", J. Strain. Anal. Eng., 48(4), 229-244. https://doi.org/10.1177/0309324713477638
  14. Kang, G. (2008), "Ratchetting: recent progresses in phenomenon observation, constitutive modeling and application", Int. J. Fatigue, 30(8), 1448-1472. https://doi.org/10.1016/j.ijfatigue.2007.10.002
  15. Kolasangiani, K. and Shariati, M. (2017), "Experimental study of SS304L cylindrical shell with/without cutout under cyclic combined and uniaxial loading", Int. J. Steel Struct., 17(2), 553-563. https://doi.org/10.1007/s13296-017-6015-7
  16. Lemaitre, J. and Chaboche, J.L. (1994), Mechanics of Solid Materials, Cambridge University Press, London, England.
  17. Lim, C., Choi, W. and Sumner, E.A. (2013), "Parametric study using finite element simulation for low cycle fatigue behavior of end plate moment connection", Steel Compos. Struct., Int. J., 14(1), 57-71. https://doi.org/10.12989/scs.2013.14.1.057
  18. Medekshas, H. and Balina, V. (2006), "Assessment of low cycle fatigue strength of notched components", Mater. Des., 27(2), 132-140. https://doi.org/10.1016/j.matdes.2004.09.015
  19. Neuber, H. (1968), "A physically nonlinear notch and crack model", J. Mech. Phys. Solids, 16, 289-294. https://doi.org/10.1016/0022-5096(68)90037-9
  20. Nozaki, M., Zhang, S., Sakane, M. and Kobayashi, K. (2011), "Notch effect on creep-fatigue life for Sn-3.5 Ag solder", Eng. Fract. Mech., 78(8), 1794-1807. https://doi.org/10.1016/j.engfracmech.2011.02.001
  21. Rahman, S.M. and Hassan, T. (2005), "Advanced Cyclic Plasticity Models in Simulating Ratcheting Responses of Straight and Elbow Piping Components, and Notched Plates", Proceedings of PVP-2005, Denver, USA, July.
  22. Sakane, M. and Ohnami, M. (1983), "A study on the notch effect on the low cycle fatigue of metals in creep-fatigue interacting conditions at elevated temperature", J. Eng. Mater. Technol., 105(2), 75-80. https://doi.org/10.1115/1.3225629
  23. Sakane, M. and Ohnami, M. (1986), "Notch Effect in Low-Cycle Fatigue at Elevated Temperatures-Life Prediction From Crack Initiation and Propagation Considerations", J. Eng. Mater. Technol., 108(4), 279-284. https://doi.org/10.1115/1.3225883
  24. Savaidis, A., Savaidis, G. and Zhang, C. (2001), "Elastic-plastic FE analysis of a notched shaft under multiaxial nonproportional synchronous cyclic loading", Theor. Appl. Fract. Mech., 36(2), 87-97. https://doi.org/10.1016/S0167-8442(01)00059-3
  25. Shariati, M., Hatami, H., Torabi, H. and Epakchi, H. (2012), "Experimental and numerical investigations on the ratcheting characteristics of cylindrical shell under cyclic axial loading", Struct. Eng. Mech., Int. J., 44(6), 753-762. https://doi.org/10.12989/sem.2012.44.6.753
  26. Shariati, M., Kolasangiani, K., Norouzi, G. and Shahnavaz, A. (2014), "Experimental study of SS316L cantilevered cylindrical shells under cyclic bending load", Thin-Wall. Struct., 82, 124-131. https://doi.org/10.1016/j.tws.2014.03.010
  27. Shariati, M., Kolasangiani, K. and Golmakani, H. (2016), "Cyclic behavr of SS316L cylindrical shells under pure torsional load: An experimental investigation", Thin-Wall. Struct., 109, 242-250. https://doi.org/10.1016/j.tws.2016.10.003
  28. Shi, D., Hu, X., Wang, J., Yu, H., Yang, X. and Huang, J. (2013), "Effect of notch on fatigue behaviour of a directionally solidified superalloy at high temperature", Fatigue Fract. Eng. Mater. Struct., 36(12), 1288-1297. https://doi.org/10.1111/ffe.12065
  29. Varvani-Farahani, A., Kodric, T. and Ghahramani, A. (2005), "A method of fatigue life prediction in notched and un-notched components", J. Mater. Process Tech., 169(1), 94-102. https://doi.org/10.1016/j.jmatprotec.2005.01.015
  30. Wang, C. and Rose, L. (1998), "Transient and steady-state deformation at notch root under cyclic loading", Mech. Mater., 30(3), 229-241. https://doi.org/10.1016/S0167-6636(98)00048-9
  31. Zeng, Z. and Fatemi, A. (2001), "Elasto-plastic stress and strain behaviour at notch roots under monotonic and cyclic loadings", J. Strain. Anal. Eng., 36(3), 287-300. https://doi.org/10.1243/0309324011514476

Cited by

  1. Yield strength estimation of X65 and X70 steel pipe with relatively low t/D ratio vol.38, pp.2, 2018, https://doi.org/10.12989/scs.2021.38.2.151