Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Stability of tow-steered curved panels with geometrical defects using higher order FSM

  • Fazilati, Jamshid (Aeronautical Science and Technology Department, Aerospace Research Institute)
  • Received : 2018.02.24
  • Accepted : 2018.04.11
  • Published : 2018.07.10
⟨ Previous Next ⟩

Abstract

For the first time, the parametric instability characteristics of tow-steered variable stiffness composite laminated (VSCL) cylindrical panels is investigated using B-spline finite strip method (FSM). The panel is considered containing geometrical defects including cutout and delamination. The material properties are assumed to vary along the panel axial length of any lamina according to a linear fiber-orientation variation. A uniformly distributed inplane longitudinal loading varies harmoni-cally with time is considered. The instability load frequency regions corresponding to the assumed in-plane parametric load-ing is derived using the Bolotin's first order approximation through an energy approach. In order to demonstrate the capabili-ties of the developed formulation in predicting stability behavior of the thin-walled VSCL structures, some representative results are obtained and compared with those in the literature wherever available. It is shown that the B-spline FSM is a proper tool for extracting the stability boundaries of perforated delaminated VSCL panels.

Keywords

References

  1. Akhavan, H. and Ribeiro, P. (2011), "Natural modes of vibration of variable stiffness composite laminates with curvilinear fibers", Compos. Struct., 93(11), 3040-3047. https://doi.org/10.1016/j.compstruct.2011.04.027
  2. Hirwani, C.K., Patil, R.K., Panda, S.K., Mahapatra, S.S., Mandal, S.K., Srivastava, L. and Buragohain, M.K. (2016), "Experimental and numerical analysis of free vibration of delaminated curved panel", Aerosp. Sci. Technol., 54, 353-370. https://doi.org/10.1016/j.ast.2016.05.009
  3. Hyer, M. and Lee, H. (1991), "The use of curvilinear fiber format to improve buckling resistance of composite plates with central circular holes", Compos. Struct., 18(3), 239-261. https://doi.org/10.1016/0263-8223(91)90035-W
  4. Hu, N., Fukunaga, H., Kameyama, M., Aramaki, K. and Chang, F.K. (2002), "Vibration analysis of delaminated composite beams and plates using a higher-order finite element", Int. J. Mech. Sci., 44(7), 1479-1503. https://doi.org/10.1016/S0020-7403(02)00026-7
  5. Ju, F., Lee, H.P. and Lee, K.H. (1995), "Free vibration of composite plates with delaminations around cutouts", Compos. Struct., 31(2), 177-183. https://doi.org/10.1016/0263-8223(95)00016-X
  6. Kumar, A. and Shrivastava, R.P. (2005), "Free vibration of square laminates with delamination around a central cutout using HSDT", Compos. Struct., 70(3), 317-333. https://doi.org/10.1016/j.compstruct.2004.08.040
  7. Fazilati, J. (2017), "Stability analysis of variable stiffness composite laminated plates with delamination using spline-FSM", Latin Am. J. Solids Struct., 14(3), 528-543. https://doi.org/10.1590/1679-78253562
  8. Fazilati, J. and Ovesy, H.R. (2013), "Parametric instability of laminated longitudinally stiffened curved panels with cutout using higher order FSM", Compos. Struct., 95, 691-696. https://doi.org/10.1016/j.compstruct.2012.08.034
  9. Mohanty, J., Sahu, S.K. and Parhi, P.K. (2015), "Parametric instability of delaminated composite plates subjected to periodic in-plane loading", J. Vib. Con., 21(3), 419-434. https://doi.org/10.1177/1077546313485613
  10. Noh, M.-H. and Lee, S.-Y. (2014), "Dynamic instability of delaminated composite skew plates subjected to combined static and dynamic loads based on HSDT", Compos. Part B, 58, 113-121. https://doi.org/10.1016/j.compositesb.2013.10.073
  11. Ovesy, H.R. and Fazilati, J. (2012), "Buckling and free vibration finite strip analysis of composite plates with cutout based on two different modeling approaches", Compos. Struct., 94(3), 1250-1258. https://doi.org/10.1016/j.compstruct.2011.11.009
  12. Ovesy, H.R., Fazilati, J. and Mahmoudabadi, M.R. (2014), "Finite strip buckling and free vibration analysis of laminated composite plates containing delamination using a first order layerwise theory", In: (B.H.V. Top-ping, P. Ivanyi Editors), Proceedings of the Twelfth International Conference on Computational Structures Technology, Civil-Comp Press, Stirlingshire, UK, Paper 24. DOI: 10.4203/ccp.106.24
  13. Park, T., Lee, S.-Y. and Voyiadjis, G.Z. (2009), "Finite element vibration analysis of composite skew laminates containing delaminations around quadrilateral cutouts", Compos. Part B, 40(3), 225-236. https://doi.org/10.1016/j.compositesb.2008.11.004
  14. Parhi, P.K., Bhattacharyya, S.K. and Sinha, P.K. (2001), "Hygrothermal effects on the dynamic behavior of mul-tiple delaminated composite plates and shells", J. Sound Vib., 248(2), 195-214. https://doi.org/10.1006/jsvi.2000.3506
  15. Ribeiro, P., Akhavan, H., Teter, A. and Warminski, J. (2014), "A review on the mechanical behaviour of curvi-linear fibre composite laminated panels", J. Compos. Mater., 48(22), 2761-2777. https://doi.org/10.1177/0021998313502066
  16. Sahu, S.K. and Datta, P.K. (2002), "Dynamic stability of curved panels with cutouts", J. Sound Vib., 251(4), 683-696. https://doi.org/10.1006/jsvi.2001.3961
  17. Sivasubramonian B., Rao G.V. and Krishnan A. (1999), "Free vibration of longitudinally stiffened curved panels with cutout", J. Sound Vib., 226(1), 41-55. https://doi.org/10.1006/jsvi.1999.2281
  18. Sofiyev, A.H. and Kuruoglu, N. (2015), "Parametric instability of shear deformable sandwich cylindrical shells containing an FGM core under static and time dependent periodic axial loads", Int. J. Mech. Sci., 101-102, 114-123. https://doi.org/10.1016/j.ijmecsci.2015.07.025
  19. Sofiyev, A.H., Zerin, Z., Allahverdiev, B.P., Hui, D., Turan, F. and Erdem, H. (2017), "The dynamic instability of FG orthotropic conical shells within the SDT", Steel Compos. Struct., Int. J., 25(5), 581-591.
  20. Sofiyev, A.H., Keskin, E.M., Erdem, H. and Zerin, Z. (2003), "The buckling of an orthotropic cylindrical thin shell with continuously varying thickness under a dynamic loading", Indian J. Eng. Mater. Sci., 10, 365-370.
  21. Tornabene, F., Fantuzzi, N. and Bacciocchi, M. (2016), "Higherorder structural theories for the static analysis of doubly-curved laminated composite panels reinforced by curvilinear fibers", Thin-Wall. Struct., 102, 222-245. https://doi.org/10.1016/j.tws.2016.01.029
  22. Yang, J. and Fu, Y. (2007), "Analysis of dynamic stability for composite laminated cylindrical shells with delaminations", Compos. Struct., 78(3), 309-315. https://doi.org/10.1016/j.compstruct.2005.10.004