References
- AATC, Available at http://www.aatc.it/en/technology(Accessed July 1. 2017).
- ABRA, Available at http://abra.pl/en/autoblastercnc-automatic-table-for-sandblasting/ (Accessed July 1. 2017).
- AGMMAKINA, Available at http://www.agmmakina.net/3/7/urunlerimiz/elmas-lamali-katrak-makinesi-model-kt-80(Accessed July 1. 2017).
- Bai, S.W., J.S. Zhang, and Z. Wang, "A methodology for evaluating cleaner production in the stone processing industry : case study of a Shandong stone processing firm", Journal of Cleaner Production, No.102, 2015, 461-476. https://doi.org/10.1016/j.jclepro.2015.04.139
- Byeon, S.K., H.K. Ryu, C.H. Lee, W.S. Yoo, and J.S. Chae, "A Design and Implementation of Vehicle State Information and Location Monitoring System Using GPS and SMS", Korea Multimedia Society, Vol.9, No.7, 2006, 914-926. (변상규, 류한경, 이충훈, 유우식, 채진석, "GPS와 SMS 를 이용한 차량 상태정보 및 위치관제 시스템의 설계 및 구현", 멀티미디어학회논문지, 제9권, 제7호, 2006, 914-926.)
- Carlo Montani, "World Marble and Stones Report 2016", 2016, Available at http://marbleintheworld.com/ws/stoneindustryreport.asp.
- Celani, G., L. Cancherini, A. Jardini, M. Oliveira, da. Lopes, J. Silva, and V. Piccoli, "3D digitation of museum sculptures for modelmaking purposes : difficulties and possible solutions", Anais do VRAP, 2009.
- Cha, S.G., J.H. Lee, and J.S. Choi, "Machine-IT convergence and u-Manufacturing Technology", The Magazine of the IEEK, Vol.38, No.3, 2011, 32-38. (차석근, 이정훈, 최진석, "기계-IT 융합과 u-Manufacturing 기술", 전자공학회지, 제38권, 제3호, 2011, 32-38.)
- Choi, J.O., Masonry Introduction, SEOWOO, 2013. (최준오, "석공사 입문", 서우, 2013.)
- Do, S.O., "A Plan for IT Adaptation & Security Management on the Road Work, River Construction Industry", KonKuk University, Master degree, 2009. (도성욱, "도로, 하천 건설공사IT응용 및 보안관리방안", 건국대학교 석사학위논문, 2009.)
- Farber, M.E. and R.A. Hisert, "3D laser scanning expands horizons for Vermont Danby marble quarry", 2016, Available at http://www.stoneworld.com/articles/88815-d-laser-scanning-expands-horizons-for-vermont-danby-marble-quarry.
- Hong, S.S., C.O. Lee, J.Y. Lee, and H.S. Yoon, "Analysis of the export and import trend of domestic stone since 1990", The Petrological Society of Korea, Vol.2010, No.5, 2010, 130-132. (홍세선, 이춘오, 이진영, 윤현수, "1990년대 이후 국내 석재의 수출과 수입 변화추이 분석", 한국암석학회, 제2010권, 제5호, 2010, 130-132.)
- Hyun, J.K., "A study on the statistics of domestic building stone industry", The Petrological Society of Korea, Vol.5, No.1, 1996, 121-127. (현전기, "국내 석재 산업의 실태에 관한 조사 연구", 한국암석학회, 제5권, 제1호, 1996, 121-127.)
- Jeon, H.S. and K.S. Park, "Construction and IT Convergence", The Magazine of the IEEK, Vol.35, No.5, 2008, 40-52. (전황수, 박기식, "건설과 IT융합", 전자공학회지, 제35권, 제5호, 2008, 40-52.)
- Jeong, M.U., "A Study on the vigorous alternatives of Stone-material industry in Korea", DanKook University, Master degree, 1998. (정만웅, "우리나라 石材産業의 活性化 方案에 관한 硏究", 단국대학교 석사학위논문, 1998.)
- Jeong, S.H., "Large wire stone cutting machine development", Korean Society of Mechanical Technology, Vol.2016, No.10, 2016, 1-4. (정석훈, "대형 와이어 스톤 커팅머신 개발", 한국기계기술학회, 제2016권, 제10호, 2016, 1-4.)
- Jwa, Y.J., J.B. Choi, K.K. Kim, J.S. Kim, and G.C. Hwang, "Quality Standard of the Geochang Granite Stone", The Petrological Society of Korea, Vol.16, No.1, 2007, 38-45. (좌용주, 최진범, 김건기, 김종선, 황길찬, "거창지역에서 산출되는 화강암 석재의 품질기준", 암석학회지, 제16권, 제1호, 2007, 38-45.)
- Kamery, J., "Using a sawjet and waterjet to ramp up production", 2016, Available at http://www.stoneworld.com/articles/88519-usingasawjet-and-waterjet-to-ramp-up-production.
- Kang, H.R., "Social Science Interpretation of IT Convergence : Prospects for the future of IT", The e-Bridge, No.4, 2009, 120-145. (강홍렬, "IT 융합의 사회 과학적 해석 : IT의 미래에 대한 전망", 한국정보처리학회, 제4호, 2009, 120-145.)
- Kim, J.M., J.Y. Son, Y.H. Choi, and J.H. Oh, "New Product Development Strategy for Advanced Mineral Aggregate Composite Industry", Journal of Advanced Mineral Aggregate Composites, Vol.3, 1998, 293-317. (김재명, 손재영, 최용훈, 오정화, "석재복합제품 관련산업의 신제품 개발전략", 석재연논문집, 제3권, 1998, 293-317.)
- Kang, J.H. and M.H. Jang, "Development of the stone surface process equipment by Water Jet System", Journal of the Society of Korea Industrial and Systems Engineering, Vol. 26, No.3, 2003, 31-38. (강지호, 장명환, "워터젯 시스템을 이용한 석재표면 처리장치 개발", 산업경영시스템학회지, 제26권, 제3호, 2003, 31-38.)
- Kim, B.W., "Analytic Hierarchy Process Method", KIMS INF, 2015. (김병욱, "의사결정계층(AHP) 분석 방법", 킴스정보전략연구소, 2015.)
- Kim, C.S. and M.U. Lee, "Plan for revitalizing the traditional stone industry in Iksan : Focusing on the Stone Cultural Center", Proceedings of the Korean Institute of Landscape Architecture Conference, 2013, 75-77. (김창숙, 이명우, "익산 전통석재산업 활성화를 위한 구상안-돌문화센터를 중심으로", 한국조경학회 학술대회논문집, 2013, 75-77.)
- Kim, D.K., D.H. Baek, and H.C. Jin, "A Study on Technology Characteristics of IT Convergence Service and Application Technology for Industrial Convergence", A Study on Technology Characteristics of IT Convergence Service and Application Technology for Industrial Convergence Service, Vol.9, No.2, 2010, 1-20. (김동관, 백동현, 진희채, "IT 융합서비스 및 활용기술의 기술속성에 관한 연구", 한국IT서비스학회지, 제9권, 제2호, 2010, 1-20.)
- Kim, H.J., D.H. Cho, and T.H. An, "A Priority Analysis on Influential Factors for Software Bid Evaluation in Public Sectors based on Analytic Hierarchy Process", Journal of Information Technology Services, Vol.16, No.1, 2017, 41-53. (김흥진, 조동혁, 안태호, "AHP 기법을 활용한 소프트웨어 제안평가요인의 상대적 중요도에 관한 연구 : 발주자와 수주자 비교를 중심으로", 한국IT서비스학회지, 제16권, 제1호, 2017, 41-53.)
- Kim, H.K., S.H. Han, and M.K. Kim, "Present Status & Future Development of the Construction Information Technology : Focus on the Acquired Technology Construction Materia", Korean Society of Civil Engineers, Vol.54, No.7, 2006, 49-53. (김형관, 한승헌, 김문겸, "건설 IT의 현황과 발전방향 : 건설자료획득기술 중심으로", 대한토목학회지, 제54권, 제7호, 2006, 49-53.)
- Kim, S.H. and O.J. Sim, "Issues and Challenges of Smart Factory for Future Manufacturing Innovation", Korea Institute for Industrial Economics & Trade, No.620, 2015. (김상훈, 심우중, "미래 제조혁신을 위한 스마트공장의 이슈와 과제", 산업연구원, 제620호, 2015.)
- KORCHAM, "Industrial Classification Reference Model for Diffusion of Smart Factories", 2014. (대한상공회의소, "스마트공장 보급 확산을 위한 업종별 참조모델", 2014.)
- Korean Standards Association, "Implications and Analysis of Standard Policy of Major Countries Preparing for the Fourth Industrial Revolution", 2017. (한국표준협회, 4차 산업혁명을 준비하는 주요국의 표준정책 분석 및 시사점, 2017.)
- Laser Products Industries, "LT-2D3D Laser Templator", 2016, Available at https://www.stoneworld.com/articles/89052-technologyupdate-lt-2d3d-laser-templator-from-laserproducts-industries(Accessed July 1. 2017).
- Lee, K.A., D.W. Park, and C.S. Koh, "Digital Forensics for Scientific Investigation", GS Intervision Seoul Korea, 2011.
- Lee, G.H., C.M. An, and G.M. Park, "Analysis of convergence of traditional industry and IT industry", Electronics and Telecommunications Research Institute, Vol.23, No.2, 2008, 13-22. (이광희, 안춘모, 박광만, "전통산업과 IT 산업의 융합화 분석", 한국전자통신연구원, 제23권, 제2호, 2008, 13-22.)
- Lee, J.W., K.S. Jeong, and Y.I. Kim, "A Study on the Effect of RF Sensor Control System upon Electric Power Consumption Reduction of University Building", The Society of Air-Conditioning and Refrigeration Engineering of Korea, 2015, 339-342. (이종원, 정광섭, 김영일, "대학교 건물에서 RF 센서 내장 제어시스템이 전력소비량 절감에 미치는 영향 연구", 대한설비공학회 학술대회논문집, 2015, 339-342.)
- Lee, K.S. and S.H. Kim, "Design and Implementation of MES System in Manufacturing Process", Chonnam National University, Master degree, 2005. (이경수, 김수형, "제조공정의 MES 시스템 설계 및 구축", 전남대학교 석사학위논문, 2005.)
- Lee, K.S., L.J. Lee, J. Lee, J.Y. Lee, Y.P. Kim, and I.K. Yoo, "Impacts and Plan of 3D printing on the industry", Korea Institute for Industrial Economics & Trade, 2016. (이경숙, 이임자, 이 준, 이재윤, 김양팽, 유인규, "3D 프링팅이 주는 산업에 미치는 영향과 대응 방안", 산업연구원, 2016.)
- Lee, S.K. and S.B. Cho, "A Study on the Success Factors of On-line Collaboration for Manufacturing Innovation Using AHP Analysis", Journal of Information Technology Services, Vol.10, No.3, 2011, 1-19. (이상곤, 조성봉, "AHP 기법을 이용한 제조혁신을 위한 온라인 협업의 성공요인에 관한 연구", 한국IT서비스학회지, 제10권, 제3호, 2011, 1-19.) https://doi.org/10.3923/itj.2011.1.10
- Lee, S.K. and B.Y. Kim, "A basic study for prevention of accident and pollution in stone industry", The Korean Society of Mineral Energy Resources Engineers, Vol.29, No.2, 1992, 57-64. (이상권, 김복윤, "석재산업의 재해 및 공해방지를 위한 기초조사연구", 한국지구시스템공학회지(구 한국자원공학회지), 제29권, 제2호, 1992, 57-64.)
- Lee, W.S., G.H. Heo, K.T. Park, and J.Y. Jeon, "Extraction of modal factors of structures using smart sensor system", Journal of The Korea Institute for Structural Maintenance and Inspection, Vol.12, No.4, 2008, 149-160. (이우상, 허광희, 박기태, 전준용, "스마트 센서 시스템을 이용한 구조물의 모달 인자 추출", 한국구조물진단유지관리공학회논문집, 제12권, 제4호, 2008, 149-160.)
- Lim, J.A., "Analysis of success factors in construction IT convergence : applying AHP", Sungkyunkwan University, Master Degree, 2011. (임정아, "AHP를 이용한 건설-IT 융합 사업의 성공 요인과 평가체계에 관한 연구", 성균관대학교 석사학위논문, 2011.)
- MINE TECHNOLOGY, "Mineral resource industry ICT convergence and technology roadmap", Korea Resources Corporation, Vol.5, No.8, 2015, 150-169. (마인테크날로지, "광물자원 산업 ICT 융합과 기술 로드맵", 한국광물자원공사, 제5권, 제8호, 2015, 150-169.)
- Ministry of Science, ICT and Future Planning, "Intelligence information society responding to the 4th industrial revolution Mid-to longterm comprehensive measures", 2017. (미래창조과학부, "제4차 산업혁명에 대응한 지능정보사회 중장기 종합대책", 2017.)
- MST, "Mine Site Technologies leverages IoT for Mining", 2016, Available at http://www.mining.com/web/mine-site-technologies-leverages-iot-for-mining(Accessed July 3. 2017.)
- Mujber, T.S., T. Szecsi, and M.S. Hashmi, "Virtual reality applications in manufacturing process simulation", Journal of materials processing technology, Vol.155, 2004, 1834-1838.
- Park, G.R., "An Application of AHP Methods to Decide Assessment Criteria Priorities for Mega Sports Events", The Journal of tourism studies, Vol.9, No.2, 2007, 71-92. (박경열, "AHP에 의한 메가 스포츠 이벤트의 평가 기준 우선순위에 관한 연구", 관광연구논총, 제19권, 제2호, 2007, 71-92.)
- Pritschow, G., M. Dalacker, J. Kurz, and M. Gaenssle, "Technological aspects in the development of a mobile bricklaying robot", Automation in Construction, Vol.5, No.1, 2014, 3-13. https://doi.org/10.1016/0926-5805(95)00015-1
- Saaty, T.L., "Fundamentals of decision making and priority theory with the analytic hierarchy process", Rws Publications, Vol.6, 2000.
- Salem Distributing Company, Available at https://www.salemdist.com/stone/showroom/robotics.
- Software Policy and Research Institute, "A Research on software-driven innovation activity in Manufacturing", 2016. (소프트웨어정책연구소, "제조업의 소프트웨어 중심혁신 활동에 관한 연구", 2016.)
- Song, H.A., "A Study on the Activation Plan of Stone Industry in Jeonbuk Province", Jeonju University Social Science Research Institute, Vol.16, 2000, 137-168. (송해안, "전북지역 석재산업의 활성화방안에 관한 연구", 사회과학논총, 제16권, 2000, 137-168.)
- Song, K.K., H.S. Shin, and H.D. Park, "Development of a program for the management of boreholes logging data associated with GIS", Korean Geotechnical Society, Vol.1999, 1999, 337-344. (송원경, 신희순, 박형동, "GIS용 시추자료 관리 프로그램 개발", 한국지반공학회 추계학술대회, 제1999권, 1999, 337-344.)
- Stone World, "Bostik launches mobile app", 2017, Available at http://www.stoneworld.com/articles/89239-bostik-launches-mobile-app(Accessed January 5. 2017.)
- The Korea Stone Press, 1979, Available at http://www.stonepress.co.kr/.
- Yang, G.H., S.U. Ryu, and Y.S. Ryu, "Implementation of Smart Control for Industrial Robot using Teleoperation Technology", Institute of Control Robotics and System, Vol.2014, No.5, 2014, 136-137. (양기훈, 류석우, 류영선, "제조 공정을 위한 산업용로봇의 원격 제어 시스템", 제어로봇시스템학회 국내학술대회논문집, 제2014권, 제5호, 2014, 136-137.)
- Yun, H.J., S.Y. Lee, and C.C. Lee, "Deriving Priorities of Competences Required for Digital Forensic Experts using AHP", The Journal of Society for e-Business Studies, Vol. 22, No.1, 2017, 107-122. (윤혜정, 이승용, 이중정, "AHP 방법을 활용한 디지털포렌식 전문가 역량의 우선순위 도출", 한국전자거래학회, 제22권, 제1호, 2017, 107-122.) https://doi.org/10.7838/jsebs.2017.22.1.107
- Yun, H.S., "Petrological characteristics on stone resources of granites in the Pocheon-Euijeongbu area", The Petrological Society of Korea, Vol.6, No.1, 1997, 34-44. (윤현수, "포천-의정부지역 화강암류 석재자원의 암석학적 특성연구", 암석학회지, 제6권, 제1호, 1997, 34-44.)