DOI QR코드

DOI QR Code

Practical Calculation of Iron Loss for Cylindrical Linear Machine

  • Jeong, Sung-In (Dept. of IT-Automotive Engineering, Gwangju University)
  • Received : 2017.11.28
  • Accepted : 2018.03.30
  • Published : 2018.09.01

Abstract

This paper is a study for accurate iron loss calculation of a cylindrical linear machine for free piston engine. This study presents that it is possible to accurately predict power loss in ferromagnetic laminations under magnetic flux by specially considering the dependence of hysteresis, classical, and excess loss components on the magnetic induction derivative. Significant iron loss in the armature core will not only compromise the machine efficiency, but may also result in excessive heating, which could lead to irreversible deterioration in the machine performance. Thus, correct prediction of power losses under a distorted flux waveform is therefore an important prerequisite to machine design, particularly when dealing with large apparatus where stringent efficiency standards are required. Finally, it will be discussed about the iron loss in various materials of cylindrical linear electric machine by geometric and electrical parameters. It will give elaborate information about the perfect design and design rules of cylindrical linear machine and in parallel tools for the calculation, simulation and design will be available.

Keywords

References

  1. Sung In Jeong, Comparative Study of Linear Oscillating Generators, Dissertation an der Technischen Universitat Braunschweig, 2015
  2. Prof. Dr.-Ing. W.-R. Canders, "Berechnung von Eisenverlusten Physikalisch basierter Ansatz nach Bertottis Theorie," TB 13-03-03
  3. W. Pieper and J. Gerster, "Total power loss density in a soft magnetic 49% Co-49% Fe-2% V-alloy," Journal of Applied Physics 109, 07A312 (2011) https://doi.org/10.1063/1.3537956
  4. Material Specification, ThyssenKrupp, M250-35
  5. Material Specification, ThyssenKrupp, M400-50
  6. Kupfmuller, Einfuhrung in die Theoretische Elektrotechnik, Springer Verlag, Berlin, Heidelberg, New York, 1968
  7. http://www.gkn.com/sintermetals/capabilities/soft-magnetic-pm/Pages/materials.aspx