DOI QR코드

DOI QR Code

Characterizing the damage mechanisms in mode II delamination in glass/epoxy composite using acoustic emission

  • Dastjerdi, Parinaz Belalpour (Non-Destructive Testing Lab, Department of Mechanical Engineering, Amirkabir University of Technology) ;
  • Ahmadi, Mehdi (Non-Destructive Testing Lab, Department of Mechanical Engineering, Amirkabir University of Technology)
  • 투고 : 2017.06.06
  • 심사 : 2018.06.09
  • 발행 : 2018.09.10

초록

Mode II delamination propagation is an important damage mode in laminated composites and this paper aims to investigate the behavior of this damage in laminated composite materials using acoustic emission (AE) technique. Three different lay-ups of glass/epoxy composites were subjected to mode II delamination propagation and generated AE signals were recorded. In order to investigate the propagation of delamination behavior of these specimens, AE signals were analyzed using Wavelet Packet Transforms (WPT) and Fast Fourier Transform (FFT). In addition, conventional AE analyses were used to enhance understanding of the propagation of delamination damage. The results indicate that different fracture mechanisms were the main cause of the AE signals. The dominant mechanisms in all the specimens were matrix cracking, fiber/matrix debonding and fiber breakage, with varying percentage of the damage mechanisms for each lay-up. Scanning Electron Microscopy (SEM) observations were in accordance to the AE results.

키워드

참고문헌

  1. American Society for Testing and Materials (ASTM) (2001), Test Method D6671-01; Standard Test Method for Mixed Mode IMode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites, West Conshohocken, Pennsylvania, U.S.A.
  2. Coifman, R.R. and Meyer, Y. (1993), Signal Processing and Compression with Wavelet Packets, Progress in Wavelet Analysis and Applications, Editions Frontiers.
  3. Crews, J.H. and Reeder, J.R. (1988), A Mixed-Mode Bending Apparatus for Delamination Testing, NASA-TM-100662.
  4. Daubechies, I. (1992), Ten Lectures on Wavelets, Philadelphia, U.S.A., SIAM.
  5. De Groot, P.J., Wijnen, P.A. and Janssen, R.B. (1995), "Real time frequency determination of acoustic emission for different fracture mechanisms in carbon/epoxy composites", Compos. Sci. Technol., 55(4), 405-412. https://doi.org/10.1016/0266-3538(95)00121-2
  6. Fotouhi, M., Belalpour Dastjerdi, P.B. and Ahmadi, M. (2014), "Acoustic emission based method to characterize glass/epoxy composite damages during 3-point bending test", International J. Mater. Sci., 4(1).
  7. Fotouhi, M., Heidary, H., Ahmadi, M. and Pashmforoush, F. (2012), "Characterization of composite materials damage under quasi-static three-point bending test using wavelet and fuzzy Cmeans clustering", J. Compos. Mater., 46(15), 1795-1808. https://doi.org/10.1177/0021998311425968
  8. Gholizadeh, S., Leman, Z. and Baharudin, B.T.H.T. (2015), "A review of the application of acoustic emission technique in engineering" Struct. Eng. Mech., 54(6), 1075-1095. https://doi.org/10.12989/sem.2015.54.6.1075
  9. Grossmann, A. and Morlet, J. (1984), "Decomposition of hardy functions into square integrable wavelets of compact shape", SIAM J. Math. Analy., 15(4), 723-736. https://doi.org/10.1137/0515056
  10. Hajizadeh, A.R., Salajegheh, J. and Salajegheh, E. (2016), "Performance evaluation of wavelet and curvelet transforms based-damage detection of defect types in plate structures", Struct. Eng. Mech., 60(4), 667-691. https://doi.org/10.12989/sem.2016.60.4.667
  11. Haselbach, W. and Lauke, B. (2003), "Acoustic emission of debonding between fibre and matrix to evaluate local adhesion", Compos Sci. Technol., 63(15), 2155-2162. https://doi.org/10.1016/S0266-3538(03)00193-3
  12. Heidari-Rarani, M. and Ghasemi, A.R. (2017), "Appropriate shape of cohesive zone model for delamination propagation in ENF specimens with R-curve effects", Theoret. Appl. Fract. Mech., 90, 174-181. https://doi.org/10.1016/j.tafmec.2017.04.009
  13. Kaiser, G. (1994), A Friendly Guide to Wavelets, Birkhauser, Basel, Swiss.
  14. Katerelos, D.G., Paipetis, A., Loutas, T., Sotiriadis, G., Kostopoulos, V. and Ogin, S.L. (2009), "In situ damage monitoring of cross-ply laminates using acoustic emission", Plast. Rubb. Compos., 38(6), 229-234. https://doi.org/10.1179/174328909X435348
  15. Kostopoulos, V., Loutas, T.H., Kontsos, A., Sotiriadis, G. and Pappas, Y.Z. (2003), "On the identification of the failure mechanisms in oxide oxide composites using acoustic emission", NDT&E Int., 36(8), 571-580. https://doi.org/10.1016/S0963-8695(03)00068-9
  16. Mallat, S. (1998), A Wavelet Tour of Signal Processing, Academic Press, New York, U.S.A.
  17. Marec, A., Thomas, J.H. and El Guerjouma, R. (2008), "Damage characterization of polymer-based composite materials: Multivariable analysis and wavelet transform for clustering acoustic emission data", Mech. Syst. Sign. Proc., 22(6), 1441-1464. https://doi.org/10.1016/j.ymssp.2007.11.029
  18. Nazmdar Shahri, M., Yousefi, J., Fotouhim M. and Ahmadi Najfabadi, M. (2015), "Damage evaluation of composite materials using acoustic emission features and Hilbert transform", J. Compos. Mater., 50(14), 1897-1907. https://doi.org/10.1177/0021998315597555
  19. Newland, D.E. (1993), Random Vibrations, Spectral and Wavelet Analysis, Longman Scientific & Technical, Essex, U.K.
  20. Ni, Q.Q. and Iwamoto, M. (2002), "Wavelet Transform of Acoustic Emission signals in failure of model composites", Eng. Fract. Mech., 69(6), 717-728. https://doi.org/10.1016/S0013-7944(01)00105-9
  21. Nikbakht, M. and Choupani, N. (2008), "Fracture toughness characterization of carbon-epoxy composite using arcan specimen", Int. J. Aerosp. Mech. Eng., 2(4), 247-253.
  22. Pappas, G. and Botsis, J. (2016), "Intralaminar fracture of unidirectional carbon/epoxy composite: Experimental results and numerical analysis", Int. J. Sol. Struct., 85, 114-124.
  23. Pappas, Y.Z., Markopoulos, Y.P. and Kostopoulos, V. (1998), "Failure mechanisms analysis of 2D carbon/carbon using acoustic emission monitoring", NDT&E Int., 31(3), 157-163. https://doi.org/10.1016/S0963-8695(98)00002-4
  24. Pashmforoush, F., Fotouhi, M. and Ahmadi, M. (2012), "Acoustic emission-based damage classification of glass/polyester composites using harmony search k-means algorithm", J. Reinf. Plast. Compos., 31(10), 671-680. https://doi.org/10.1177/0731684412442257
  25. Qi, G. (2000), "Wavelet-based AE characterization of composite materials", NDT&E Int., 33(3), 133-144. https://doi.org/10.1016/S0963-8695(99)00037-7
  26. Qi, G., Barhorst, A., Hashemi, J. and Kamala, G. (1997), "Discrete wavelet decomposition of acoustic emission signals from carbon-fiber-reinforced composites", Compos. Sci. Technol., 57(4), 389-403. https://doi.org/10.1016/S0266-3538(96)00157-1
  27. Ramirez-Jimenez, C.R., Papadakis, N., Gan, T.H., Purnell, P. and Pharaoh, M. (2004), "Identification of failure modes in glass/polypropylene composites by means of the primary frequency content of the acoustic emission event", Compos. Sci. Technol., 64(12), 1819-1827. https://doi.org/10.1016/j.compscitech.2004.01.008
  28. Rao, R.M. and Bopardikar, A.S. (1998), Wavelet Transforms Introduction to Theory and Applications, Addison-Wesley, Amsterdam, the Netherlands.
  29. Refahi Oskouei, A., Heidary, H., Ahmadi, M. and Farajpur, M. (2012), "Unsupervised acoustic emission data clustering for the analysis of damage mechanisms in glass/polyester composites", Mater. Des., 37, 416-422. https://doi.org/10.1016/j.matdes.2012.01.018
  30. Refahi Oskouei, A., Zucchelli, A., Ahmadi, M. and Minak, G. (2011), "An integrated approach based on acoustic emission and mechanical information to evaluate the delamination fracture toughness at mode I in composite laminate", Mater. Des., 32(3), 1444-1455. https://doi.org/10.1016/j.matdes.2010.08.048
  31. Shokrieh, M.M. and Heidari-Rarani, M. (2011), "A Comparative study for beams on elastic foundation models to analysis of mode I delamination in DCB specimen", Struct. Eng. Mech., 37(2), 149-162. https://doi.org/10.12989/sem.2011.37.2.149
  32. Subba Rao, S.V. and Subramanyam, B. (2008), "Analysis of Aacoustic emission signals using wavelet transformation technique", Def. Sci. J., 58(4), 559-564. https://doi.org/10.14429/dsj.58.1677
  33. Velayudham, A., Krishnamurthy, R. and Soundarapandian, T. (2005), "Acoustic emission based drill condition monitoring during drilling of glass/phenolic polymeric composite using wavelet packet transform", Mater. Sci. Eng. Part A, 412(1-2), 141-145. https://doi.org/10.1016/j.msea.2005.08.036
  34. Yamaguchi, K. and Oyaizu, H. (1991), Acoustic Emission Technology Using Multi-parameter Analysis of Waveform and Application to GFRP Tensile Tests, Acoustic Emission, Current Practice and Future Directions, ASTM STP 1077, Philadelphia, U.S.A., 123-143.
  35. Yousefi, J., Ahmadi, M., Shahri, M.N., Oskouei, A.R. and Moghadas, F.J. (2014), "Damage categorization of glass/epoxy composite material under mode II delamination using acoustic emission data: A clustering approach to elucidate wavelet transformation analysis", Arab. J. Sci. Eng., 39(2), 1325-1335. https://doi.org/10.1007/s13369-013-0712-0