Textile Science and Engineering (한국섬유공학회지)

The Korean Fiber Society (한국섬유공학회)
권호 표지
DOI QR코드

DOI QR Code

Manufacture and Engineering Evaluation of Hybrid Grid Fabrics for Seismic Reinforced Carbon Fiber Composite Yarns. I. Manufacture of Carbon Fiber Composite Yarn and Fabric Design

내진보강용 탄소섬유 복합사 하이브리드 그리드 직물 제조 및 공학적 성능 평가. I. 탄소섬유 복합사 제조 및 최적 직물 설계

  • Yan, Yu (Department of Applied Organic Materials Engineering, Inha University Graduate School) ;
  • Cha, Ju Hee (Department of Applied Organic Materials Engineering, Inha University Graduate School) ;
  • Chai, Charles (R&D Institute, BUSUNG TEXTEC Co., Ltd.) ;
  • Lee, Hyeong Ho (Mekamore Co., Ltd.) ;
  • Jeon, Han Yong (Department of Chemical Engineering, Inha University Graduate School)
  • 연우 (인하대학교 대학원 유기응용재료공학과) ;
  • 차주희 (인하대학교 대학원 유기응용재료공학과) ;
  • 채철수 ((주)부성텍스텍 기술연구소) ;
  • 이형호 ((주)메카모아) ;
  • 전한용 (인하대학교 화학공학과)
  • Received : 2018.07.07
  • Accepted : 2018.08.16
  • Published : 2018.08.31
⟨ Previous Next ⟩

Abstract

In this study, a carbon fiber composite yarn with the desired stiffness and ductility was fabricated for use in hybrid grid fabrics for seismic reinforcement, and the optimum structures of the grid fabrics were evaluated. Carbon fiber composite yarn was prepared by a double-covering process with carbon fiber/aramid fiber/high-strength PET fiber. It was confirmed that the strength of the carbon fiber composite yarn was greatly increased compared to that of carbon fiber, and the elongation increased by about 0.5%. The TPU (thermoplastic polyurethane) extrusion coating method was more suitable for the carbon fiber composite yarn than urethane impregnation for the coating process. Meanwhile, in the evaluation of yarn fineness and grid structure, thick fibers had greater strengths. When comparing the strength and elongation, the bi-directional grid showed no advantages over the unidirectional grid.

Keywords

References

  1. Y. Xiao and H. Wu, "Compressive Behavior of Concrete Confined by Carbon Fiber Composite Jackets", J. Mater. Civil Eng., 2000, 12, 139-146. https://doi.org/10.1061/(ASCE)0899-1561(2000)12:2(139)
  2. C. H. Chang, M. H. Kwon, J. S. Kim, and C. H. Joo, "Numerical Study for Seismic Strengthening of RC Columns Using Fiber Reinforced Plastic Composite", J. Korea Inst. Struct. Maint. Insp., 2012, 16, 117-127.
  3. S. M. Choi and J. W. Park, “Experimental Study of Flexural Behavior of Steel Beam Strengthened with the Fiber Reinforced Polymer Plastic(FRP) Strips”, Journal of Korean Society of Steel Construction, 2014, 26, 69-79. https://doi.org/10.7781/kjoss.2014.26.2.069
  4. J. W. Yoon, W. C. Lee, J. H. Cheung, S. D. Kim, and B. S. Cho, "Ductility Characteristics of RC Beams Strengthened with Carbon Fiber Sheets", Korean Society of Civil Engineering Conference, 2002, pp.704-707.
  5. J. H. Hur, J. H. Kim, W. G. Park, and K. H. Kim, "Seismic Performance of Seismic Retrofitted Column by Various Type of FRP", Spring Conference of the Korean Society for Railway, 2013, pp.1378-1385.
  6. X. Volmer, "Creating Architecture with CFRC: Introducing Carbon Fibre Composite as Structural Material", Master Thesis, Delft University of Technology, Delft, 2014.
  7. A. Dasgupta, "Retrofitting of Concrete Structure with Fiber Reinforced Polymer", Int. J. Innov. Res. Sci. Technol., 2018, 4, 42-49.
  8. A. P. Michael, H. R. Hamilton, and M. H. Ansleym, "Concrete Confinement Using carbon Fiber Reinforced Polymer Grid", American Concrete Institute, SP230-56, 2005, 230, 991-1010.
  9. C. W. Lin and J. H. Lin, "Manufacture and Application of High-Performance Geogrids with PP/PET Composite Covered Yarn", Text. Res. J., 2005, 75, 453-457. https://doi.org/10.1177/0040517505053872
  10. R. M. Koemer, "Designing with Geosynthetics", Xlibris Corporation, Indiana, 2012, 6th Ed., Vol. 1, pp.47-50.