DOI QR코드

DOI QR Code

Flutter reliability analysis of suspension bridges based on multiplicative dimensional reduction method

  • Guo, Junfeng (School of Civil Engineering, Southwest Jiaotong University) ;
  • Zheng, Shixiong (School of Civil Engineering, Southwest Jiaotong University) ;
  • Zhang, Jin (School of Civil Engineering, Southwest Jiaotong University) ;
  • Zhu, Jinbo (School of Civil Engineering, Southwest Jiaotong University) ;
  • Zhang, Longqi (Department of road and bridge engineering, Sichuan Vocational and Technical College of Communications)
  • 투고 : 2017.08.10
  • 심사 : 2018.03.15
  • 발행 : 2018.09.25

초록

A reliability analysis method is proposed in this paper based on the maximum entropy (MaxEnt) principle in which constraints are specified in terms of the fractional moments instead of integer moments. Then a multiplicative dimensional reduction method (M-DRM) is introduced to compute the fractional moments. The method is applicable for both explicit and implicit limit state functions of complex structures. After two examples illustrate the accuracy and efficiency of this method in comparison to the Monte Carlo simulation (MCS), the method is used to analyze the flutter reliability of suspension bridge. The results show that the empirical formula method in which the limit state function is explicitly represented as a function of variables is only a too conservative estimate for flutter reliability analysis but is not accurate adequately. So it is not suitable for reliability analysis of bridge flutter. The actual flutter reliability analysis should be conducted based on a finite element method in which limit state function is implicitly represented as a function of variables. The proposed M-DRM provide an alternate and efficient way to analyze a much more complicated flutter reliability of long span suspension bridge.

키워드

과제정보

연구 과제 주관 기관 : Natural Science Foundation of China

참고문헌

  1. Agar, T.J.A. (1988), "The analysis of aerodynamic flutter of suspension bridges", Comput . Struct., 30(3), 593-600. https://doi.org/10.1016/0045-7949(88)90294-5
  2. Balomenos, G. (2015), "Probabilistic finite element analysis of structures using the multiplicative dimensional reduction method", Ph.D. Dissertation, University of Waterloo, Waterloo, Canada.
  3. Balomenos, G.P., Genikomsou, A.S., Polak, M.A. and Pandey, M.D. (2015), "Efficient method for probabilistic finite element analysis with application to reinforced concrete slabs", Eng. Struct., 103, 85-101. https://doi.org/10.1016/j.engstruct.2015.08.038
  4. Bucher, C.G. and Bourgund, U. (1990), "A fast and efficient response surface approach for structural reliability problems", Struct. Saf., 7(1), 57-66. https://doi.org/10.1016/0167-4730(90)90012-E
  5. Cheng, J., Cai, C.S., Xiao, R.C. and Chen, S.R. (2005), "Flutter reliability analysis of suspension bridges", J. Wind Eng. Ind. Aerod., 93(10), 757-775. https://doi.org/10.1016/j.jweia.2005.08.003
  6. Chen, S.R. and Cai, C.S. (2003), "Evolution of long-span bridge response to wind-numerical simulation and discussion", Comput. Struct., 81(21), 2055-2066. https://doi.org/10.1016/S0045-7949(03)00261-X
  7. Davis, P.J. and Rabinowitz, P. (1984), Methods of Numerical Integration, Academic Press Inc., London, UK.
  8. Faravelli, L. (1989), "Response-surface approach for reliability analysis", J. Eng. Mech., 115(12), 2763-2781. https://doi.org/10.1061/(ASCE)0733-9399(1989)115:12(2763)
  9. Ge, Y.J., Xiang, H.F. and Tanaka, H. (2000), "Application of a reliability analysis model to bridge flutter under extreme winds", J. Wind Eng. Ind. Aerod., 86(2), 155-167. https://doi.org/10.1016/S0167-6105(00)00008-8
  10. Gzyl, H., Milev, M. and Tagliani, A. (2007). "Discontinuous payoff option pricing by Mellin transform: A probabilistic approach", Finance Res. Lett., 20, 281-288.
  11. Han, Y., Liu, S. and Cai, C.S. (2015), "Flutter stability of a longspan suspension bridge during erection", Wind Struct., 21(1), 41-61. https://doi.org/10.12989/was.2015.21.1.041
  12. Hong, Y., Lee, S. and Li, T. (2015). "Numerical method of pricing discretely monitored Barrier option", J. Comput. Appl. Math., 278, 149-161. https://doi.org/10.1016/j.cam.2014.08.022
  13. Huh, J. and Haldar, A. (2001), "Stochastic finite-element-based seismic risk of nonlinear structures", J. Struct. Eng., 127(3), 323-329. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:3(323)
  14. Huh, J. and Haldar, A. (2002), "Seismic reliability of non-linear frames with PR connections using systematic RSM", Probab. Eng. Mech., 17(2), 177-190. https://doi.org/10.1016/S0266-8920(02)00002-4
  15. Inverardi, P.N., Petri, A., Pontuale, G. and Tagliani, A. (2005), "Stieltjes moment problem via fractional moments", Appl. Math. Comput., 166(3), 664-677. https://doi.org/10.1016/j.amc.2004.06.060
  16. Jaynes, E.T. (1957), "Information theory and statistical mechanics", Phys. Rev., 108(2), 171-190. https://doi.org/10.1103/PhysRev.108.171
  17. Kabaivanov, S., Malechkova, A., Marchev, A., Milev, M., Markovska, V. and Nikolova, K. (2015), "A step beyond the Monte Carlo method in economics: Application of multivariate normal distribution", 1690(1), 227-240.
  18. Kaymaz, I. and McMahon, C.A. (2005), "A response surface method based on weighted regression for structural reliability analysis", Probab. Eng. Mech., 20(1), 11-17. https://doi.org/10.1016/j.probengmech.2004.05.005
  19. Lagarias, J.C., Reeds, J.A., Wright, M.H. and Wright, P.E. (1998), "Convergence properties of the Nelder--Mead simplex method in low dimensions", SIAM J. Optimiz., 9(1), 112-147. https://doi.org/10.1137/S1052623496303470
  20. Larsen, A. (1997), "Prediction of aeroelastic stability of suspension bridges during erection", J. Wind Eng. Ind. Aerod., 72, 265-274. https://doi.org/10.1016/S0167-6105(97)00248-1
  21. Li, G. and Zhang, K. (2011), "A combined reliability analysis approach with dimension reduction method and maximum entropy method", Struct. Multidiscip.O., 43(1), 121-134. https://doi.org/10.1007/s00158-010-0546-2
  22. Li, G., Rosenthal, C. and Rabitz, H. (2001), "High dimensional model representations", J. Phys. Chem. A, 105(33), 7765-7777. https://doi.org/10.1021/jp010450t
  23. Liu, Y.W. and Moses, F. (1994), "A sequential response surface method and its application in the reliability analysis of aircraft structural systems", Struct. Saf., 16(1-2), 39-46. https://doi.org/10.1016/0167-4730(94)00023-J
  24. Milev, M., Inverardi, P.N. and Tagliani, A. (2012), "Moment information and entropy evaluation for probability densities", Appl. Math. Comput. 218(9), 5782-5795. https://doi.org/10.1016/j.amc.2011.11.093
  25. Milev, M. and Tagliani, A. (2017). "Entropy convergence of finite moment approximations in Hamburger and Stieltjes problems", Stat. Probabil. Lett., 120, 114-117. https://doi.org/10.1016/j.spl.2016.09.017
  26. Nowak, A.S., Nowak, S. and Szerszen, M.M. (2003), "Calibration of design code for buildings (ACI 318): part 1 - statistical models for resistance", Am. Concrete Inst. Struct. J., 100, 377-382.
  27. Ostenfeld-Rosenthal, P., Madsen, H.O. and Larsen, A. (1992), "Probabilistic flutter criteria for long span bridges", J. Wind Eng. Ind. Aerod., 42(1), 1265-1276. https://doi.org/10.1016/0167-6105(92)90133-U
  28. Pandey, M.D. and Zhang, X. (2012), "System reliability analysis of the robotic manipulator with random joint clearances", Mech. Mach. Theory, 58, 137-152. https://doi.org/10.1016/j.mechmachtheory.2012.08.009
  29. Pourzeynali, S. and Datta, T.K. (2002), "Reliability analysis of suspension bridges against flutter", J. Sound Vib., 254(1), 143-162. https://doi.org/10.1006/jsvi.2002.4090
  30. Prenninger, P.H.W., Matsumoto, M., Shiraishi, N., Izumi, C. and Tsukiyama, Y. (1990), "Reliability of bridge structures under wind loading: consideration of uncertainties of wind load parameters", J. Wind Eng. Ind. Aerod., 33(1-2), 385-394. https://doi.org/10.1016/0167-6105(90)90054-G
  31. Rabitz, H. and Alis, O.F. (1999), "General foundations of highdimensional model representations", J. Math. Chem.., 25(2-3), 197-233. https://doi.org/10.1023/A:1019188517934
  32. Rahman, S. and Xu, H. (2004), "A univariate dimension-reduction method for multi-dimensional integration in stochastic mechanics", Probab. Eng. Mech., 19(4), 393-408. https://doi.org/10.1016/j.probengmech.2004.04.003
  33. Rajashekhar, M.R. and Ellingwood, B.R. (1993), "A new look at the response surface approach for reliability analysis", Struct. Saf., 12(3), 205-220. https://doi.org/10.1016/0167-4730(93)90003-J
  34. Ramirez, P. and Carta, J.A. (2006), "The use of wind probability distributions derived from the maximum entropy principle in the analysis of wind energy", Energ. Convers. Manage., 47(15), 2564-2577. https://doi.org/10.1016/j.enconman.2005.10.027
  35. Shi, X., Li, J., Xiong, Q., Wu, Y. and Yuan, Y. (2016). "Research of uniformity evaluation model based on entropy clustering in the microwave heating processes", Neurocomputing, 173, 562-572. https://doi.org/10.1016/j.neucom.2015.07.034
  36. Sobhani, A. and Milev, M. (2017). "A Numerical Method for Pricing Discrete Double Barrier option by Legendre Multiwavelet", J. Comput. App. Math..
  37. Taufer, E., Bose, S. and Tagliani, A. (2009), "Optimal predictive densities and fractional moments", Appl. Stoch. Model. Bus., 25(1), 57-71. https://doi.org/10.1002/asmb.721
  38. Xu, F.Y., Chen, A.R. and Zhang, J.R. (2006), "Flutter reliability of cable supported bridge", China J. Highway Transport, 19(5), 59-64. In Chinese.
  39. Yao, T.H.J. and Wen, Y.K. (1996), "Response surface method for time-variant reliability analysis", J. Struct. Eng., 122(2), 193-201. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:2(193)
  40. Zhang, W.M., Ge, Y.J. and Levitan, M.L. (2011), "Aerodynamic flutter analysis of a new suspension bridge with double main spans", Wind Struct., 14(3), 187-208. https://doi.org/10.12989/was.2011.14.3.187
  41. Zhang, X. and Pandey, M.D. (2013), "Structural reliability analysis based on the concepts of entropy, fractional moment and dimensional reduction method", Struct. Saf., 43, 28-40. https://doi.org/10.1016/j.strusafe.2013.03.001
  42. Zhang, X., Pandey, M.D. and Zhang, Y. (2011), "A numerical method for structural uncertainty response computation", Science China Technol. Sci., 54(12), 3347-3357. https://doi.org/10.1007/s11431-011-4603-x
  43. Zheng, Y. and Das, P.K. (2000), "Improved response surface method and its application to stiffened plate reliability analysis", Eng. Struct., 22(5), 544-551. https://doi.org/10.1016/S0141-0296(98)00136-9
  44. Zwillinger, D. (2011), CRC standard mathematical tables and formulae, CRC press, Taylor and Francis Group, Boca Raton, USA.