DOI QR코드

DOI QR Code

Cure Characteristics, Mechanical Property and Ozone Resistance of Natural Rubber/Bromo Isobutylene Isoprene Rubber Blend

  • Choi, Im Cheol (Dept. of Polymer Engineering, Pukyong National University) ;
  • Lee, Won-Ki (Dept. of Polymer Engineering, Pukyong National University) ;
  • Park, Chan Young (Dept. of Polymer Engineering, Pukyong National University)
  • 투고 : 2018.09.10
  • 심사 : 2018.09.19
  • 발행 : 2018.09.30

초록

Natural rubber (NR) and bromo-isobutylene-isoprene rubber (BIIR) were compounded with other formulation chemicals through polymer blending via a mechanical mixing method. After rubber vulcanization by hot-press compression molding, the cure characteristics, mechanical properties, and ozone resistance of the NR/BIIR blends were measured. As the BIIR content increased, the maximum torque of the blends decreased, while the optimum cure time and scorch time tended to increase. Furthermore, the hardness of the blends increased with increasing BIIR content, reaching the maximum value at 75 wt% BIIR, and decreased with a further increase in the BIIR loading. The tensile strength and elongation at break decreased with an increase in the BIIR content, reaching the minimum value at 75 wt% BIIR, and increased with a further increase in the BIIR content. In the ozone resistance test, cracks were not generated when the BIIR content was more than 75 wt%.

키워드

참고문헌

  1. K. Chowdhury, Mamun, "Free energy of mixing of crosslinked polymer blends", Langmuir, 21, 240 (2005). https://doi.org/10.1021/la048479m
  2. L. A. Varghese and E. T. Thachil, "Studies on the adhesive properties of neoprene-phenolic blends", Journal of Adhesion Science and Technology, 18, 181 (2004). https://doi.org/10.1163/156856104772759395
  3. P. Cassagnau and F. Fenouillot, "Rheological study of mixing in molten polymers: 2-mixing of reactive systems", Polymer, 45, 8031 (2004). https://doi.org/10.1016/j.polymer.2004.09.028
  4. Z. Bartczak, V. Chiono, and M. Pracella, "Blends of propyl-ene-ethylene and propylene-1-butene random copolymers: I. Morphology and structure", Polymer, 45, 7549 (2004). https://doi.org/10.1016/j.polymer.2004.07.055
  5. L. D'Orazio, C. Mancarella, and E. Martuscelli, "Polypropylene/ethylene-co-propylene blends: influence of molecular structure and composition of EPR on melt rheology, morphology and impact properties of injection-moulded samples", Polymer, 32, 1186 (1991). https://doi.org/10.1016/0032-3861(91)90220-D
  6. A. D. Sarma, H. H. Le, A. Das, S. WieBner, and G. Heinrich, "Determination of phase specific localization of carbon black in ternary rubber blends: A macroscopic approach by Fourier transform infrared spectroscopy (FTIR)", Polymer, 150, 64 (2018). https://doi.org/10.1016/j.polymer.2018.07.013
  7. S. N. Koklas, D. D. Sotiropoulou, and J. K. Kallitsis, "Compatibilization of chlorinated polyethylene/poly(vinyl chloride) blends with epoxidized natural rubber", Polymer, 32, 66 (1991). https://doi.org/10.1016/0032-3861(91)90563-X
  8. N. Tokita, "Analysis of morphology formation in elastomer blend", Rubber Chemistry and Technology, 50, 292 (1977). https://doi.org/10.5254/1.3535144
  9. A. Sumner, S. Kelbch, and A. Verbiest, "Halogenated butyl rubbers having a low halogen content", US Patent 5886106 (1999).
  10. B. T. Shan, "Preparation of bromobutyl rubber and characterization of its structure and property (in Chinese)", Master Thesis of Beijing University of Chemical Technology, Beijing, 2010.
  11. W. Baade, H. Konigshofen, and G. Kaszas, "Process for the bromination of alkyl rubbers, US Patent 5569723 (1996).
  12. R. F. Storey and Y. Lee, "Sulfonation of tert-alkyl chloride: application to the tert-chloride-terminated polyisobutylene system", J. Polym. Sci. Part A: Polym. Chem., 29, 317 (1991). https://doi.org/10.1002/pola.1991.080290304
  13. C. Y. Chu and R. Vukov, "Determination of the structure of butyl rubber by NMR spectroscopy", Macromolecules, 18, 1423 (1985). https://doi.org/10.1021/ma00149a012
  14. I. J. Gardner, J. V. Fusco, I. F. Newman, R. C. Kowalski, W. M. Davis, and F. P. Baldwin, "Halogenated butyl rubber", US Patent 4632963 (1986).
  15. P. T. Parker, R. L. Baton, L. John, and J. Bryan, "Continuous chlorination and bromination of butyl rubber", US Patent 3099644 (1963).
  16. R. C. Kowalski, W. M. Davis, N. F. Newman, Z. A. Foroulis, and F. P. Baldwin, "Extrusion process for preparing improved brominated butyl rubber", US patent 4563506 (1986).