Journal of Korean Society for Quality Management (품질경영학회지)

Korean Society for Quality Management (한국품질경영학회)
권호 표지
DOI QR코드

DOI QR Code

A study on the standardization of Noise Filter drawings

노이즈 필터 도면 표준화 방안에 관한 연구

  • Lee, JiHyeog (Defense agency for Technology and Quality(DTaQ))
  • Received : 2018.08.10
  • Accepted : 2018.09.14
  • Published : 2018.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

Purpose: The purpose of this study was to propose a standard form of noise filter drawing, which is widely used in the field of weapon systems, to define the essential specification which is not standardized at the existing drawings and to employ the reference for manufacturing and qualification test. Methods: To do that, it identifies the improvements to analyze 19 noise filter drawings, studies the principle of noise filtering to find the essential part of the spec. and reviews the MIL-STD-220C and KS IEC 60939, which is the widely used as a formal spec. pertaining to the noise filter. Throughout the study, a standard form is developed to standardize the attenuation characteristics and find eight crucial metrics to specify the noise filter. Results: The results of this study are as follows; The standardized drawings can be used as the qualification test of the item and the manufacturing and engineering documents to make the noise filter, which are also applicable to the reference document to review KDS(Korea Defense Standard) drawings.

Keywords

References

  1. Arrow Electronics Homepage, www.arrow.com/Offical_Site/Shop.
  2. B. S. Kim. 2014. "The modeling and optimization of EMI Filter using S-parameter." Master Thesis, SKKU, Oct.
  3. B. S. Shin. 2014. "Noise Reduction Technique for Electronic Medical Device." Master Thesis, AJU, Aug.
  4. C. David K. 1989. Field and wave electromagnetics. New York: Addision-Wesley.
  5. Department of Defense(DoD). 1986. "Electromagnetic Emission and Susceptibility Requirements For the control of Electromagnetic Interference." MIL-STD-461C, Aug.
  6. Department of Defense(DoD). 2007. "Electromagnetic Interference characteristics requirement for equipment." MIL-STD-461F.
  7. Department of Defense(DoD). 2000. "TEST METHOD STANDARD METHOD OF INSERTION LOSS MEASUREMENT." MIL-STD-220B, Jan.
  8. Department of Defense(DoD). 2009. "TEST METHOD STANDARD METHOD OF INSERTION LOSS MEASUREMENT." MIL-STD-220C, May.
  9. Federal Communication Commission(FCC). 2015. "Radio Frequency Device." Code of Federal Regulation, Titel 47, Part 15(47 CFR 15).
  10. International Rectifier, www.irf.com/product/HiRel-Products/.
  11. J. H. Lee. 2018. "A study on the standardization of Noise Filter." DTaQ-18-5683-R.
  12. Korean Agency for Technology and Standards. 2003. "Complete filter units for radio interference suppression- Part 1: Generic specification." KS C IEC 60939-1.
  13. Mouser Electronics Hoempate, www.mouser.com.
  14. M. S.Zainal, M. Z. M. Zenu. "Reduction of conducted emission noise using various power supply filters." In Applied Electromanetics. 2003. APACE 2003. Asia-Pacific Conference on, pp. 100-103. IEEE.
  15. Murata Manufacturing Co., www.murata,com/en-global/prducts/emc/ferrite/basic/reason.
  16. Murata Manufacturing Co., www.murata.com/en-global/products/emc/emifil.
  17. On Semiconductor, www.onsemi.com/PowerSolutions/.
  18. Panasonic Homepage, na.industrial.panasonic.com.
  19. TDK-Lamda Homepage, product.tdk.com/info/en/products/emc/emc/power-line/.
  20. TDK-Lamda Homepage, product.tdk.com/info/en/products/emc/guidebook/eemc_product_08.pdf.
  21. Verband Deutscher Elektrotechnicker. 1991. Radio interference suppression of radio frequency equipment. DIN VDE 0871.
  22. Wllamowski. 2011. Power electronics and motor drives. Boca Raton, FL: CRC Press.
  23. Woonyoung Co.,Ltd., "The Noise Filter Technical Report." woonyoung.com
  24. Y. J. Son. 2016. "Improvement of FFX Batch-I Military satellite-ES EMI interference." DTaQ-16-4676-R.