DOI QR코드

DOI QR Code

Dynamic instability response in nanocomposite pipes conveying pulsating ferrofluid flow considering structural damping effects

  • Esmaeili, Hemat Ali (Department of Mechanical Engineering, Sari Branch, Islamic Azad University) ;
  • Khaki, Mehran (Department of Mechanical Engineering, Sari Branch, Islamic Azad University) ;
  • Abbasi, Morteza (Department of Mechanical Engineering, Sari Branch, Islamic Azad University)
  • 투고 : 2018.08.03
  • 심사 : 2018.09.18
  • 발행 : 2018.11.10

초록

This paper deals with the dynamic stability of nanocomposite pipes conveying pulsating ferrofluid. The pipe is reinforced by carbon nanotubes (CNTs) where the agglomeration of CNTs are considered based on Mori-Tanaka model. Due to the existence of CNTs and ferrofluid flow, the structure and fluid are subjected to axial magnetic field. Based on Navier-Stokes equation and considering the body forced induced by magnetic field, the external force of fluid to the pipe is derived. For mathematical modeling of the pipe, the first order shear deformation theory (FSDT) is used where the energy method and Hamilton's principle are used for obtaining the motion equations. Using harmonic differential quadrature method (HDQM) and Bolotin's method, the motion equations are solved for calculating the excitation frequency and dynamic instability region (DIR) of the structure. The influences of different parameters such as volume fraction and agglomeration of CNTs, magnetic field, structural damping, viscoelastic medium, fluid velocity and boundary conditions are shown on the DIR of the structure. Results show that with considering agglomeration of CNTs, the DIR shifts to the lower excitation frequencies. In addition, the DIR of the structure will be happened at higher excitation frequencies with increasing the magnetic field.

키워드

참고문헌

  1. Atci, D. and Bagdatli, S.M. (2017), "Free vibrations of fluid conveying microbeams under non-ideal boundary conditions", Steel Compos. Struct., 24(2), 141-149. https://doi.org/10.12989/SCS.2017.24.2.141
  2. Bozyigit, B., Yesilce, Y. and Catal, S. (2017), "Differential transform method and Adomian decomposition method for free vibration analysis of fluid conveying Timoshenko pipeline", Struct. Eng. Mech., 62(1), 65-77. https://doi.org/10.12989/sem.2017.62.1.065
  3. Civalek, O. (2004), "Application of differential quadrature (DQ) and harmonic differential quadrature (HDQ) for buckling analysis of thin isotropic plates and elastic columns", Eng. Struct., 26(2), 171-186. https://doi.org/10.1016/j.engstruct.2003.09.005
  4. Cong, P.H. and Duc, N.D. (2018), "New approach to investigate the nonlinear dynamic response and vibration of a functionally graded multilayer graphene nanocomposite plate on a viscoelastic Pasternak medium", Acta Mech., 229, 3651-3670. https://doi.org/10.1007/s00707-018-2178-3
  5. Duc, N.D., Hadavinia, H., Van Thu, P. and Quanm, T.Q. (2015), "Vibration and nonlinear dynamic response of imperfect threephase polymer nanocomposite panel resting on elastic foundations under hydrodynamic loads", Compos. Struct., 131, 229-237. https://doi.org/10.1016/j.compstruct.2015.05.009
  6. Duc, N.D., Seung-Eock, K., Quan, T.Q., Long, D.D. and Anh, V.M. (2018), "Nonlinear dynamic response and vibration of nanocomposite multilayer organic solar cell", Compos. Struct., 184, 1137-1144. https://doi.org/10.1016/j.compstruct.2017.10.064
  7. Duc, N.D., Tran, Q.Q. and Nguyen, D.K. (2017), "New approach to investigate nonlinear dynamic response and vibration of imperfect functionally graded carbon nanotube reinforced composite double curved shallow shells", Aerosp. Sci. Technol., 71, 360-372.
  8. Garcia-Macias, E. and Castro-Triguero, R. (2018), "Coupled effect of CNT waviness and agglomeration: A case study of vibrational analysis of CNT/polymer skew plates", Compos. Struct., 193, 87-102. https://doi.org/10.1016/j.compstruct.2018.03.001
  9. Ghaitani, M.M. and Majidian, A. (2017), "Frequency and critical fluid velocity analysis of pipes reinforced with FG-CNTs conveying internal flows", Wind Struct., 24(3), 267-285. https://doi.org/10.12989/was.2017.24.3.267
  10. Ghayesh, M.H. and Farokhi, H. (2018), "On the viscoelastic dynamics of fluid-conveying microtubes", Int. J. Eng. Sci., 127, 186-200.
  11. Henderson, J.P., Plummer, A. and Johnston, N. (2018), "An electro-hydrostatic actuator for hybrid active-passive vibration isolation", Int. J. Hydromech., 1(1), 47-71.
  12. Kamarian, S., Salim, M., Dimitri, R. and Tornabene, F. (2016), "Free vibration analysis of conical shells reinforced with agglomerated carbon nanotubes", Int. J. Mech. Sci., 108, 157-165.
  13. Kamarian, S., Shakeri, M., Yas, M.H., Bodaghi, M. and Pourasghar, A. (2015), "Free vibration analysis of functionally graded nanocomposite sandwich beams resting on Pasternak foundation by considering the agglomeration effect of CNTs", J. Sandw. Struct. Mater., 17(6), 632-665. https://doi.org/10.1177/1099636215590280
  14. Kiani, K. (2014), "Free vibration of conducting nanoplates exposed to unidirectional in-plane magnetic fields using nonlocal shear deformable plate theories", Phys. E, 57, 179-192.
  15. Lakes, R. (2009), Viscoelastic Materials, Cambridge University Press, U.S.A.
  16. Lakis, A.A. and Sinno, M. (1992), "Free vibration of axisymmetric and beam-like cylindrical shells partially filled with liquid", Int. J. Numer. Meth. Eng., 33(2), 235-268. https://doi.org/10.1002/nme.1620330203
  17. Mori, T. and Tanaka, K., (1973), "Average stress in matrix and average elastic energy of materials with Misfitting inclusions", Acta Metall. Mater., 21(5), 571-574. https://doi.org/10.1016/0001-6160(73)90064-3
  18. Patel, S.N., Datta, P.K. and Sheikh, A.H. (2006), "Buckling and dynamic instability analysis of stiffened shell panels", Thin-Wall. Struct., 44(3), 321-333. https://doi.org/10.1016/j.tws.2006.03.004
  19. Qian, S. and Bau, H.H. (2005), "Magneto-hydrodynamic stirrer for stationary and moving fluids", Sens. Actuat., 106(2), 859-870. https://doi.org/10.1016/j.snb.2004.07.011
  20. Qian, S. and Bau, H.H. (2009), "Magneto-hydrodynamics based microfluidics", Mech. Res. Commun., 36(1), 10-21. https://doi.org/10.1016/j.mechrescom.2008.06.013
  21. Raminnea, M., Biglari, H. and Vakili Tahami, F. (2016), "Nonlinear higher order Reddy theory for temperaturedependent vibration and instability of embedded functionally graded pipes conveying fluid-nanoparticle mixture", Struct. Eng. Mech., 59(1), 153-186. https://doi.org/10.12989/sem.2016.59.1.153
  22. Reddy, J.N. (2002), Mechanics of Laminated Composite Plates and Shells: Theory and Analysis, 2nd Edition, CRC Press.
  23. Rehab, I. Tian, X., Gu, F. and Andrew Ball, D. (2018), "The influence of rolling bearing clearances on diagnostic signatures based on a numerical simulation and experimental evaluation", Int. J. Hydromechatron., 1(1), 16-46. https://doi.org/10.1504/IJHM.2018.090304
  24. Sanada, K. (2018), "Real-time implementation of Kalman filter for unsteady flow measurement in a pipe", Int. J. Hydromechatron., 1(1), 3-15. https://doi.org/10.1504/IJHM.2018.090303
  25. Shokravi, M. (2017), "Vibration analysis of silica nanoparticlesreinforced concrete beams considering agglomeration effects", Comput. Concrete, 19(3), 333-338. https://doi.org/10.12989/cac.2017.19.3.333
  26. Shokravi, M. Jalili, N. (2017), "Vibration and stability of embedded cylindrical shell conveying fluid mixed by nanoparticles subjected to harmonic temperature distribution", Wind Struct., 25(4), 381-395. https://doi.org/10.12989/was.2017.25.4.381
  27. Thu, P.V. and Duc, N.D. (2017), "Non-linear dynamic response and vibration of an imperfect three-phase laminated nanocomposite cylindrical panel resting on elastic foundations in thermal environments", Sci. Eng. Compos. Mater., 24(6), 951-962. https://doi.org/10.1515/secm-2015-0467
  28. Tohidi, H., Hosseini-Hashemi, S.H., Maghsoudpour, A. and Etemadi, S. (2017), "Strain gradient theory for vibration analysis of embedded CNT-reinforced micro Mindlin cylindrical shells considering agglomeration effects", Struct. Eng. Mech., 62(5), 551-565. https://doi.org/10.12989/SEM.2017.62.5.551
  29. Tornabene, F., Fantuzzi, N. and Bacciocchi, M. (2017), "Linear static response of nanocomposite plates and shells reinforced by agglomerated carbon nanotubes", Compos. Part B: Eng., 115, 449-476. https://doi.org/10.1016/j.compositesb.2016.07.011
  30. Tornabene, F., Fantuzzi, N., Bacciocchi, M. and Viola, E. (2016), "Effect of agglomeration on the natural frequencies of functionally graded carbon nanotube-reinforced laminated composite doubly-curved shells", Compos. Part B: Eng., 89, 187-218. https://doi.org/10.1016/j.compositesb.2015.11.016
  31. Vakili Tahami, F., Biglari, H. and Raminnea, M. (2017), "Moving load induced dynamic response of functionally graded-carbon nanotubes-reinforced pipes conveying fluid subjected to thermal load", Struct. Eng. Mech., 64(4), 515-526. https://doi.org/10.12989/SEM.2017.64.4.515
  32. Wang, L. and Ni, Q. (2009), "A reappraisal of the computational modelling of carbon nanotubes conveying viscous fluid", Mech. Res. Commun., 36(7), 833-837. https://doi.org/10.1016/j.mechrescom.2009.05.003
  33. Zamani Nouri, A. (2017), "Mathematical modeling of concrete pipes reinforced with CNTs conveying fluid for vibration and stability analyses", Comput. Concrete, 19(3), 325-331. https://doi.org/10.12989/cac.2017.19.3.325
  34. Zamani Nouri, A. (2018), "The effect of Fe2O3 nanoparticles instead cement on the stability of fluid-conveying concrete pipes based on exact solution", Comput. Concrete, 21(1), 31-37. https://doi.org/10.12989/CAC.2018.21.1.031