A Study on the Statistical Production Control of Energy Efficiency in Electric Product

전기제품 에너지 소비효율의 통계적 양산 관리 방법에 대한 연구

  • 전영호 (홍익대학교 산업공학과) ;
  • 김성돈 (홍익대학교 대학원 산업공학과)
  • Received : 2018.08.31
  • Accepted : 2018.12.31
  • Published : 2018.12.31

Abstract

Most electric products produced during the manufacturing process are produced after design and mass production under a given control standard. In particular, the development phase should present the criteria for the production process by setting appropriate limits based on the performance being targeted. Even if the standard of performance is set considering the performance of the process, measuring the performance of the product after actual production results will cause nonconformities with the expected results. Among the performance of electrical products, Energy standards represented by energy consumption efficiency continue to be of importance, and are mandatory standards that correspond to national standards in most countries. Therefore, statistical quality control of these standards shall basically have a large number of test equipment for each product, ensure sufficient test time and continuous sampling of product samples. In the end, companies that produce and sell electric appliances are striving to control mass production at a great cost, but this is not acceptable. This study presents basic characteristics of the energy efficiency of electrical products and proposes and conducts a case study on statistical production control methods for performance variation across products under the standards about domestic and international regulations.

Keywords

Acknowledgement

Supported by : 홍익대학교

References

  1. 권영철, 장근선 (2003). 실사용 조건을 고려한 에너지 소비효율 평가방법. 대한설비공학회 공조부문 학술강연회, 253-261.
  2. 산업통상자원부 고시 제2016-72호, 효율관리기자재 운용규정.
  3. 오민혁, 백정명, 이병하, 김정훈, 황성욱, 원종률 (2006), 냉장고와 에어컨의 에너지 효율 기준 개선 방안 분석, 대한전기학회 추계학술대회 논문집, 216-218.
  4. 이선근, 최수현 (1996), 가전기기 에너지 소비효율 기준설정에 관한 연구, 한국에너지공학회 학술발표회, 제1권, 144-151.
  5. 이성근, 이성인 (2008), 국가 에너지절약 및 효율향상 추진체계 개선방안 연구, 에너지경제연구원, 기본연구보고서 08-10.
  6. 임기추, 박기현, 이강일, 이철송 (2010), 에너지 소비효율 등급 표시제도 운영 및 사후관리 개선방안 연구, 에너지 경제연구원 수시연구보고서, 1-177.
  7. 안정일, 안태호 (2017), 맵패턴지수를 이용한 반도체 품질관리, 22권 1호, 61-75.
  8. 정원 (2014), 신뢰성 확보를 위한 품질시스템의 보완방안, 한국경영공학회지, 19권 4호, 135-145.
  9. 황은애 (2009), 에너지 소비효율 표시제도의 개정 동향 분석, 한국 소비자원.
  10. Hahn, G. J. & Meeker, W. Q. (1991), Statistical Intervals : A Guide for Practitioners, John Wiley & Sons, Inc.
  11. KS C 9306:2011, 에어컨디셔너, 국가기술표준원.
  12. KS C IEC 60335-2-40, 가정용 및 이와 유사한 전기 기기의 안정성 - 제2-40부 : 히트펌프, 에어컨디셔너 및 제습기의 개별 요구사항.
  13. Proschan, F. (1953), Confidence and Tolerance Intervals for Normal Distribution, Journal of the American Statistical Association, Vol. 48, No 263, 550-564. https://doi.org/10.1080/01621459.1953.10483493
  14. Weerahandi, S. (2003), Exact Statistical Methods for Data Analysis, Springer.